Abstract:Ultrafast laser has an undeniable advantage in laser processing due to its extremely small pulse width and high peak energy. While the interaction of ultrafast laser and solid materials is an extremely non-equilibrium process in which the material undergoes phase transformation and even ablation in an extremely short time range. This is the coupling of the thermos elastic effect caused by the pressure wave and the superheated melting of the material lattice. To further explore the mechanism of the action of ultrafast laser and metal materials, the two-temperature model coupling with molecular dynamics method was used to simulate the interaction of the copper and laser energy. Firstly, the interaction of single-pulsed laser and copper film was reproduced, and the calculated two-temperature curve and the visualized atomic snapshots were used to investigate the influence of laser parameters on the ablation result. Then, by changing the size of the atomic system, the curve of ablation depth as a function of laser fluence was obtained. In this paper, the interaction of multi-pulsed laser and copper was calculated. Two-temperature curve and temperature contour of copper film after the irradiation of double-pulsed and multi-pulsed laser were obtained. And the factors which can make a difference to the incubation effect were analyzed. By calculating the ablation depth under the action of multi-pulsed laser, the influence of the incubation effect on ablation results was further explored. Finally, a more accurate numerical model of laser machining metal is established and verified by an ultra-short laser processing experiment, which provides a new calculation method and theoretical basis for ultra-fast laser machining of air film holes in aviation turbine blades, and has certain practical guiding significance for laser machining.

Novel ultrafast laser ablation by bibursts in the MHz and GHz pulse repetition rates

Efficient ablation, further GHz burst polishing, and surface texturing by ultrafast laser

Efficient surface polishing using burst and biburst mode ultrafast laser irradiation

Laser Machining at High ∼PW/cm2 Intensity and High Throughput

High efficiency femtosecond laser ablation with gigahertz level bursts

Study on mechanism of biburst mode in femtosecond laser ablation through in-situ monitoring

Super-efficient drilling of metals with ultrafast non diffractive laser beams

Ultrafast laser processing of materials: from science to industry

Molecular-dynamics study of multi-pulsed ultrafast laser interaction with copper

Ultra-Short Pulse Lasers for Microfabrication: A Review

Ultrafast pump-probe ellipsometry and microscopy reveal the surface dynamics of femtosecond laser ablation of aluminium and stainless steel

Measurement of ultrashort laser ablation of four metals (Al, Cu, Ni, W) in single pulse regime

Bi-stability in femtosecond laser ablation by MHz bursts

Ablation-cooled material removal with ultrafast bursts of pulses

Study of burst mode for enhancing the ps-laser cutting performance of lithium-ion battery electrodes

Ultrafast Bessel beams; advanced tools for laser materials processing

Micro-welding of non-optical contact sapphire/metal using Burst femtosecond laser

Laser ablation and micromachining with ultrashort laser pulses

Study on Ultra-Short Laser Pulse Ablation of Metals by Molecular Dynamics Simulation

Functional surface formation by efficient laser ablation using single-pulse and burst-modes

Improving the efficiency of picosecond laser micromachining of stainless steel