Abstract:Lithium-ion battery (LIB) is one of the most promising power sources for electronic devices and electric vehicles because of their high energy densities and relatively long lifetime. Graphite is widely used as the anode electrode material in the state-of-the-art LIBs. However, a graphite anode is usually only compatible with an ethylene carbonate (EC)-based electrolyte. In a propylene carbonate (PC)-containing electrolyte, which is advantageous over the EC-based counterpart due to its wider temperature range and higher low-temperature conductivity, the graphite anode experiences significant exfoliation problem during the initial lithium intercalation step. Thus a PC-containing electrolyte cannot be used in LIBs with graphite as the anode unless some solid electrolyte interphase (SEI) film-formation additives are included in the electrolytes. Usually these additives are electrochemically reduced predominantly on the graphite anode surface before PC is intercalated and reduced. Such additives normally contain unsaturated bonds or are unstable cyclic compounds, for instance, vinylene carbonate (VC) and fluoroethylene carbonate (FEC). They play an important role in the protection of the graphitic anode structure from destruction by PC reduction. However, these additives also have certain shortcomings. Usually these additives result in a thick SEI layer, which significantly reduces the rate capability and limits low-temperature performance and cycling stability at elevated temperatures through additional impedance and poor thermal stability. Recently, we developed a novel electrolyte additive that can suppress the PC reductive decomposition on the graphite anode without forming a thick and resistant SEI film. As shown in Figure 1, this additive can not only significantly improve the compatibility between graphite anode and PC-containing electrolyte, but also exhibit superior rate capability and excellent cycling stability at elevated temperatures.This new electrolyte additive can be applied to LIBs and other electrochemical systems using PC-containing electrolytes and graphite anodes. In this work, we systematically investigated the mechanism of the SEI formation by this additive and the protection of graphite anode in PC-containing electrolytes. Several techniques, including computational calculations and simulations, 17O nuclear magnetic resonance (NMR), “soft” electrospray ionization mass spectrometry (ESI-MS), time of flight second ion mass spectrometry (ToF-SIMS), etc. have been used to reveal the reasons behind the compatibility and stability of graphite anode in PC-containing electrolytes with this new additive. The details of the results will be reported at the meeting. Acknowledgements This work was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technology of the U.S. Department of Energy (DOE). The 17O NMR and ToF-SIMS measurements were performed at the Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at PNNL. Figure 1

Unraveling the mechanism of methyl acetate additive for reinforcing solid electrolyte interface on graphite anodes

Improving the Cycling Performance of High-Voltage NMC111 || Graphite Lithium Ion Cells by an Effective Urea-Based Electrolyte Additive

Behind the Stability of Graphite Anode in PC-Containing Electrolytes with a New Additive

Influences of Additives on the Formation of a Solid Electrolyte Interphase on MnO Electrode Studied by Atomic Force Microscopy and Force Spectroscopy

Methyl Acetate Boosts the Low-Temperature Performance of Li4Ti5O12/Graphite Dual-Ion Batteries.

Effect of High-Voltage Additives on Formation of Solid Electrolyte Interphases in Lithium-Ion Batteries

Enhancing high-temperature storage performance for the commercial lithium-ion battery via a effective addtive strategy

SEI-Film-Suppression Additive for Enhancing Compatibility and Electrochemical Stability of Graphite Anode in PC-Based Electrolytes

Effect of Methyl Acetate on Low-Temperature Performance of Lico1/3ni1/3mn1/3o2 Cathode and Graphite Anode

Effects of hexamethylenetetramine as an electrolyte additive on elevated temperature performance of graphite/LiMn2O4 batteries

Highly Efficient Interface Modification between Poly(Propylene Carbonate)-Based Solid Electrolytes and a Lithium Anode by Facile Graphite Coating

Fluorine-Rich Electrolyte Additive for Achieving Dendrite-Free Lithium Anodes at Low Temperatures

Regulating the interfacial chemistry of graphite in ethyl acetate‐based electrolyte for low‐temperature Li‐ion batteries

New Insight on the Role of Electrolyte Additives in Rechargeable Lithium Ion Batteries

Altering the Solid Electrolyte Interface Through Surface-Modification of Lithium Metal Anode for High-Voltage Lithium Battery

Additives-containing functional electrolytes for suppressing electrolyte decomposition in lithium-ion batteries

Enhanced electrochemical performances via introducing LiF electrolyte additive for lithium ion batteries

Multifunctional Additives to Realize Dendrite‐Free Lithium Deposition in Carbonate Electrolytes toward Low‐Temperature Li Metal Batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Designing High-Chaos Mixed-Salt Electrolytes for Enhancing Graphite-Electrolyte Interfacial Stability in Lithium-Ion Batteries

Optimizing interphase structure to enhance electrochemical performance of high voltage LiNi0.5Mn1.5O4 cathode via anhydride additives