A critical examination of the organism described as Bacillus wakefield.

R. Bridges,J. Taylor

Journal of Hygiene

Abstract:

What problem does this paper attempt to address?

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Xue Ye,Jing Wu,Jianneng Liang,Yipeng Sun,Xiangzhong Ren,Xiaoping Ouyang,Dazhuan Wu,Yongliang Li,Lei Zhang,Jiangtao Hu,Qianling Zhang,Jianhong Liu

DOI: https://doi.org/10.1021/acsami.2c15452

IF: 9.5

2022-01-01

ACS Applied Materials & Interfaces

Abstract:Low cycling Coulombic efficiency (CE) and messy Li dendrite growth problems have greatly hindered the development of anode-free Li-metal batteries (AFLBs). Thus, functional electrolytes for uniform lithium deposition and lithium/electrolyte side reaction suppression are desired. Here, we report a locally fluorinated electrolyte (LFE) medium layer surrounding Cu foils to tailor the chemical compositions of the solid-electrolyte interphase (SEI) in AFLBs for inhibiting the immoderate Li dendrite growth and to suppress the interfacial reaction. This LFE consists of highly concentrated LiTFSI dissolved in a fluoroethylene carbonate and/or succinonitrile plastic mixture. The CE of Cu||LiNi0.8Co0.1Mn0.1O2 (NCM811) AFLB increased to a high level of 99% as envisaged, and the cycling ability was also highly improved. These improvements are facilitated by the formation of a uniform, dense, and LiF-rich SEI. LiF possesses high interfacial energy at the LiF/Li interface, resulting in a more uniform Li deposition process as proved by density functional theory (DFT) calculation results. This work provides a simple yet utility tech for the enhancement of future high-energy-density AFLBs.
Nanostructured Li-Rich Fluoride Coated by Ionic Liquid as High Ion-Conductivity Solid Electrolyte Additive to Suppress Dendrite Growth at Li Metal Anode.

Chilin Li,Keyi Chen,Jiulin Hu

DOI: https://doi.org/10.1021/acsami.8b12579

2018-09-12

Abstract:Blending additive with electrolyte is a facile and effective method to suppress anode dendrite growth in Li metal batteries (LMBs), especially when a LiF-rich solid electrolyte interface (SEI) is formed as a consequence of additive decomposition or deposition. However LiF still suffers from poor bulk ion conductivity as well as the difficult access to tailored nanostructure. Exploring new Li fluoride of high Li-ion conductivity as SEI component is still a big challenge in view of the lacking of desired structure prototype or mineral phase. Here, we propose a Li-rich Li3AlF6 derivative from cryolite phase as solid electrolyte additive, which is characterized by textured nanoporous morphology and ionic liquid coating. Its room temperature ion conductivity is as high as ∼10-5 S/cm with a low activation energy of 0.29 eV, the best level among fluoride-based solid electrolytes. These features guarantee a homogenization of Li+ fluxing through bulk and grain boundary of Li3AlF6-rich SEI and reinforce the effect on Li dendrite suppression. Li3AlF6 additive enables a stable cyclability of Li∥Li symmetric cells for at least 100 cycles even under a high areal capacity of 3 mA h/cm2 and a significant improvement on capacity retention for various LMBs based on LiFePO4, FeS2, and S cathodes.

Chemistry,Engineering,Medicine,Materials Science
Bifunctional fluoropyridinium-based cationic electrolyte additive for dendrite-free Li metal anode

Kunyao Peng,Pei Tang,Qianqian Yao,Qingyun Dou,Xingbin Yan

DOI: https://doi.org/10.1007/s12274-023-5761-4

IF: 9.9

2023-06-07

Nano Research

Abstract:Although lithium metal has become a promising anode material for high-energy batteries owing to its high specific capacity and the lowest reduction potential, the continuous side reactions with electrolyte as well as the safety problem caused by Li dendrite growth restrict Li anode's practical application. Herein, we demonstrate that N-fluoropyridinium (ArF + ) bis(trifluoromethane)sulfonimide (TFSI − ) as an electrolyte additive can protect the lithium metal by both solid electrolyte interphase (SEI) protection and electrostatic repulsion mechanisms. The ArF + cations not only participate in forming F, N-containing SEI protective layer on Li surface, but also act as a cationic repellent during Li deposition to inhibit Li dendrite growth. As a result, the cycle performance of Li symmetric cells and Li∥LiFePO 4 full cells were significantly improved by using ArFTFSI-added electrolyte. This study provides an electrolyte additive strategy for Li anode realizing SEI protection and electrostatic repulsion simultaneously.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Multifunctional Additives to Realize Dendrite‐Free Lithium Deposition in Carbonate Electrolytes toward Low‐Temperature Li Metal Batteries

Jinlong Jiang,Meng Li,Xiaoyu Liu,Jin Yi,Yong Jiang,Chao Wu,Huakun Liu,Bing Zhao,Wenrong Li,Xueliang Sun,Jiujun Zhang,Shixue Dou

DOI: https://doi.org/10.1002/aenm.202400365

IF: 27.8

2024-04-27

Advanced Energy Materials

Abstract:In this work, heptafluorobutyramide (HFT) and LiNO3 additives are introduced in Li metal batteries with carbonate‐based electrolyte. The HFT can promote dissolution of LiNO3 and inhibit generation of destructive HF. The additives will be preferentially reduced to LiF and Li3N on Li metal, prompting the full cell matched with LiFePO4 to maintain high capacity retention for 500 cycles at low temperature of −20 °C. Li metal is recognized as one of the most promising anode candidates for next‐generation high specific energy batteries. However, the fragile solid electrolyte interface (SEI) and heterogeneous Li plating/stripping in carbonate electrolyte severely encumber its practical application. Here, the heptafluorobutyramide (HFT) and lithium nitrate (LiNO3) are proposed to synergistically construct a robust SEI layer with excellent Li+ transport kinetics. The HFT can promote the dissolution of LiNO3 in carbonate electrolyte due to the strong cooperation. The results of theoretical calculations, in situ Raman and X‐ray photoelectron spectroscopy with deep Ar‐ion etching demonstrate that HFT and NO3− will be preferentially reduced to a Li3N/LiF‐rich composite structure on the surface of Li metal. Particularly, after the addition of additives, the first solvent shell is converted from solvent‐dominated to anion‐dominated structure, and thus a significantly lower Li‐ion desolvation barrier is presented. Consequently, the Coulombic efficiency (CE) of Li||Cu half cells using the designed carbonate electrolyte can reach 97.1%. The full cells matched with LiFePO4 and LiNi0.8Co0.1Mn0.1O2 (NCM 811) can deliver high‐capacity retention over 100% at −20°C. This work provides an effective strategy for the regulation of solvation structure and the construction of high‐performance Li metal batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Developing ester-based fluorinated electrolyte with LiPO2F2 as an additive for high-rate and thermally robust anode-free lithium metal battery

Boas Tua Hotasi,Teklay Mezgebe Hagos,Chen Jui Huang,Shi-Kai Jiang,Bikila Alemu Jote,Kassie Nigus Shitaw,Hailemariam Kassa Bezabh,Chia-Hsin Wang,Wei-Nien Su,She-Huang Wu,Bing Joe Hwang

DOI: https://doi.org/10.1016/j.jpowsour.2022.232047

IF: 9.2

2022-11-15

Journal of Power Sources

Abstract:The electrolyte of 1 M LiPF6 in FEC/TTE/EMC (FTE 352) has been demonstrated to increase cycle life, safety, and energy density of anode-free lithium metal battery (AFLMB) due to its high oxidative stability, nonflammability, and capability to form lithium fluoride (LiF) rich solid electrolyte interphase (SEI). Methyl acetate (MA), a linear ester, is selected to reduce the use of expensive FEC and expand the adaptability of an electrolyte for high rates and lower temperature applications. Due to its lower LUMO value, a complementary additive LiPO2F2 was applied to tune the SEI. In this work, 1 M LiPF6 in FEC/TTE/EMC/MA (1/5/2/2 vol ratio) + 1 wt% LiPO2F2 was thus developed, which has high ionic conductivity, high oxidative stability (>5 V), high-rate capability, thermal stability, and tolerance to low temperature (0 °C). Using an anode-free configuration, this electrolyte delivers an average coulombic efficiency of 97.5% at room temperature and 96% at 0 °C. In contrast, the average coulombic efficiency of 1 M LiPF6 in FTE 352 is 94.4% at 0 °C. This electrolyte also holds capacity retention of 48% under a current density of 2 mA/cm2 using Cu||NMC111, while the reference electrolyte's capacity retention is 35%.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
[Toasted rapeseed meal in broiler fattening diet].

J. Schlöffel,H. Jeroch,W. Seffner,G. Jahreis

DOI: https://doi.org/10.1080/17450399309386090

Abstract:A fattening trial of six week duration using male broiler chicks of the TETRA 82 genotype has been performed to evaluate the feeding value of rapeseed meal derived from the following rapeseed origins of so-called double-zero quality: Canola (Cananda), Jantar (Poland) and the new-bred East German-genotype BNW 1.43, each at a diet level of 12%. Moreover, the indigenous origin has been investigated at levels of 6 and 18% in practical broiler rations as a protein source instead of soybean meal (partial replacement). The fattening results (live weight development, intake and conversion of feed, mortality) do not show disadvantageous effects by the different rapeseed meal origins, and the various levels too. The chemical whole-body composition gives reduced fat and more protein in broiler's carcass at a diet level of 12 and 18% of BNW 1.43-rapeseed meal. Blood plasma levels of T3 and T4 have refered to beginning status of hypothyreodism, higher percentages of rapeseed mean had been fed. Weight of broiler's thyroid varied independtly of treatment. Also by the means of histometrical investigation of these glands the effects known for conventional rapeseed meals could be demonstrated, however in an important weakly extent. In comparison to discrepancies in the literature results regarding the possible inclusion of double-zero rapeseed meal in broiler diets, it seems a maximum diet level of 12% of toasted rapeseed meal of used qualities could be recommended for practical diet formulation (without of performance depressions). However, further investigations are be essential in these questions.
Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

Chao Xu,Guiomar Hernandez,Sabina Abbrent,Libor Kober,Rafal Konefal,Jiri Brus,Kristina Edstrom,Daniel Brandell,Jonas Mindemark

DOI: https://doi.org/10.1021/acsaem.9b00607

IF: 6.4

2019-01-01

ACS Applied Energy Materials

Abstract:Implementing Li metal anodes provides the potential of substantially boosting the energy density of current Li-ion battery technology. However, it suffers greatly from fast performance fading largely due to substantial volume change during cycling and the poor stability of the solid electrolyte interphase (SEI). Fluoroethylene carbonate (FEC) is widely acknowledged as an effective electrolyte additive for improving the cycling performance of batteries consisting of electrode materials that undergo large volume changes during cycling such as Li metal. In this study, we report that while FEC can form a robust SEI on the electrode, it also deteriorates the shelf life of electrolytes containing LiPF6. The degradation mechanism of LiPF6 in FEC solutions is unraveled by liquid-and solid-state NMR. Specifically, traces of water residues induce the hydrolysis of LiPF6, releasing HF and PF5 which further trigger ring-opening of FEC and its subsequent polymerization. These reactions are significantly accelerated at elevated temperatures leading to the formation of a three-dimensional fluorinated solid polymer network. Moisture scavenger additives, such as lithium 4,5-dicyano-2-(trifluoromethyl)imidazole (LiTDI), can delay the degradation reaction as well as improve the cycling stability of LiNi1/3Mn1/3Co1/3O2/Li metal batteries at 55 degrees C. This work highlights the poor shelf life of electrolytes containing FEC in combination with LiPF6 and thereby the great importance of developing proper storage methods as well as optimizing the content of FEC in practical cells.
An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Jianwen Zhang,Haikuo Zhang,Leqing Deng,Yusi Yang,Lulu Tan,Xiaogang Niu,Yifan Chen,Liang Zeng,Xiulin Fan,Yujie Zhu

DOI: https://doi.org/10.1016/j.ensm.2022.10.052

2022-01-01

Abstract:To achieve stable cycling of high-energy-density and high-voltage anode-free lithium metal batteries, the interfacial stability of both lithium metal anode and high-voltage cathode is demanded. Electrolytes based on ether solvents tend to have excellent compatibility with the lithium metal anode, but due to their low oxidation potential (generally less than 4.0 V vs. Li+/Li), they render high-voltage LiNi0.8Co0.1Mn0.1O2 (NCM811) cathodes unsatisfactory electrochemical performance. Here, an average Coulombic efficiency of 99.4% is realized for lithium metal plating-striping by using an ether-based local high-concentration electrolyte. By further intro-ducing a minute amount of lithium difluoro(oxalate)borate (LiDFOB) additive (0.02 M) into this baseline elec-trolyte, its oxidation stability is increased to 4.3 V without compromising its high Coulombic efficiency towards reversible lithium plating-striping. Consequently, this additive-supported electrolyte enables the high-loading (3.0 mAh cm-2) Cu||NCM811 anode-free cells to achieve high-capacity retention at both room temperature (-95% capacity retention after 50 cycles) and-20 C (-79% capacity retention after 30 cycles). A combination of microscopic and spectroscopic investigations aided by theoretical calculations demonstrate that the LiDFOB additive helps generate a Li3N-and LiF-rich solid electrolyte interphase on the lithium metal anode side, enabling dense and uniform lithium deposition, meanwhile, it also leads to a uniform and compact cathode electrolyte interphase on the high-voltage NCM811 cathode side, mitigating the transition metals dissolution. This work provides a simple and promising strategy for the electrolyte design of high-voltage anode-free batteries.
Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode

Jian Yang,Junming Hou,Zixuan Fang,Khan Kashif,Cheng Chen,Xinran Li,Haiping Zhou,Shu Zhang,Tingting Feng,Ziqiang Xu,Mengqiang Wu

DOI: https://doi.org/10.1016/j.cej.2021.133193

IF: 15.1

2022-04-01

Chemical Engineering Journal

Abstract:Lithium (Li) metal has to overcome key performance flaws before it can be used as the anode material for the next generation Li+ batteries. One of its major issues is Li dendrite growth and detachment, which causes safety issues and low Coulombic efficiency for Li metal batteries. Constructing a stable solid electrolyte interface (SEI) is considered to be the most straightforward solution to the Li anode interface defects. Here, we develop a facile stratagem of 2-(Fluorosulphonyl)difluoroacetic acid-treated Li foil to obtain a Li metal anode coated by the lithium fluoride and sulfide enriched composite layer (LiF/sulfide enriched Li). The experimental and theoretical simulations demonstrate that the ideal artificial SEI can induce uniform Li+ distribution at the interface and effectively inhibit dendrite growth. As results, the LiF/sulfide enriched Li symmetrical cells exhibit excellent cycling stability and low Li deposition overpotential, which maintain a low overpotential of ∼ 10 mV for over 1000 h at 1 mA cm−2 in an ether electrolyte of DME/DOL + LiTFSI and steadily cycles for 350 h in a carbonate electrolyte of EC/EMC + LiPF6. Furthermore, full cells assembled with NCM811 and sulfur cathode exhibit enhanced cyclability. This facile and controllable stratagem provides a more practical possibility for modifying the Li metal anode.
Stable Non‐flammable Phosphate Electrolyte for Lithium Metal Batteries via Solvation Regulation by the Additive

Gaoxue Jiang,Jiandong Liu,Zhongsheng Wang,Jianmin Ma

DOI: https://doi.org/10.1002/adfm.202300629

IF: 19

2023-04-28

Advanced Functional Materials

Abstract:In this work, 4‐nitrophenyl trifluoroacetate (TFANP) changes the Li+ solvation structure in the electrolyte with reduced coordination number of triethyl phosphate and increased coordination number of propylene carbonate. Moreover, TFANP can be decomposed on the anode/cathode surface to form a dense LiF‐rich and highly Li+ conductive solid electrolyte interphase/cathode electrolyte interphase for suppressing the growth of Li dendrites and reducing continuous electrolyte consumption. The application of lithium metal batteries (LMBs) is impeded by safety concerns. Employing non‐flammable electrolytes can improve battery reliability while the cost and performance deterioration limit their popularization. Herein, a high‐performance non‐flammable electrolyte is designed, 1.5 m LiTFSI in propylene carbonate (PC)/triethyl phosphate (TEP) (4:1 by vol.) with 4‐nitrophenyl trifluoroacetate (TFANP) as the additive, which can facilitate the construction of LiF‐rich solid electrolyte interphase (SEI) on Li anode surface and cathode electrolyte interphase (CEI) on cathode surface through its prioritized decomposition. In TFANP‐containing electrolyte, the decreased TEP coordination number in the solvation sheath relieves the adverse effect of active TEP on both the SEI and CEI for suppressing the growth of Li dendrites and reducing the continuous electrolyte consumption. Thus, the Li||LiNi0.6Co0.2Mn0.2O2 battery with such an electrolyte can deliver 132 mAh g−1 after 150 cycles with high coulombic efficiency (99.5%) and superior rate performance (110 mAh g−1 at 5 C, 1 C = 200 mA g−1). This work provides a new additive insight on non‐flammable electrolyte for reliable LMBs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Robust tracking control of nonlinear singularly perturbed systems

Jing Xu,Y. Niu

DOI: https://doi.org/10.23919/CHICC.2017.8027487

2017-07-01

Abstract:This paper presents a robust control scheme for the tracking control of singularly perturbed uncertain systems. The design problem is divided into two parts: tracking the reference trajectory and enhancing the robustness of the dynamic systems. By using the time-scale techniques, dynamic inversion approach and linear parameter-varying methods, a set of singularly perturbed state feedback controllers are employed to enhance the tracking performance and robustness of a dynamic system against parameter uncertainties, actuator and sensor unmodelled dynamics, and external disturbances. The longitudinal control of an F16 aircraft model is included to show the merits and and effectiveness of the proposed design scheme.
Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Minghui Li,Cai Chen,Hongze Luo,Qingshuai Xu,Keyou Yan,Yongcai Qiu,Guangmin Zhou

DOI: https://doi.org/10.1039/d3ta07655e

IF: 11.9

2024-01-01

Journal of Materials Chemistry A

Abstract:Li metal anodes are considered among the most ideal candidates for next generation batteries owing to their lowest electrochemical potential and high theoretical capacity. However, the highly reactive Li metal is subject to continuous side reactions with conventional carbonate electrolytes. The resulting unsatisfying solid electrolyte interface (SEI) induces severe Li dendritic growth. Therefore, there is an urgent need to effectively control the components of SEI to solve the electrolyte/anode interface electrochemical instability. Herein, LiDFP and LiNO3 are introduced into the electrolyte to modulate the composition of the SEI. Owing to the lower lowest unoccupied molecular orbital (LUMO) energy levels of LiDFP and LiNO3 relative to those of the solvents, LiDFP and LiNO3 have preferential reducibility and thus generate a stable SEI containing LiF and Li3N, which has swift ion migration kinetics and homogeneous Li deposition behaviors. As a result, our electrolyte modified by additives enables the anode to achieve an excellent coulombic efficiency of 98% and exhibits an ultra-long cycling life of over 700 h in symmetrical cells. Li metal full cells paired with the LFP or NCM811 cathode also have excellent long cycling performance. This work demonstrates that additive-modified electrolytes are a viable and simple strategy for the evolution of Li metal batteries. The SEI formation mechanism in the absence/presence of LiDFP and LiNO3 additives.
Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

Di Zhang,Pengfei Lv,Wei Qin,Yuanhua He

DOI: https://doi.org/10.1016/j.electacta.2024.144224

IF: 6.6

2024-04-07

Electrochimica Acta

Abstract:Lithium-metal anodes have attracted widespread attention owing to their high specific capacity. However, they still suffer from poor stability under high-rate cycling and safety issues, which are mainly induced by the significant growth of Li dendrites and the collapse of the solid electrolyte interphase during extended cycling. Effective protective coatings can withstand severe environmental corrosion during handling and cycling. In this study, we develop a convenient and controllable surface fluorination process to develop a dense and uniform ultrathin lithium fluoride (LiF) protective coating on the Li metal surface by vacuum evaporation. Advanced comprehensive analyses demonstrate that the 200 nm-thick LiF protective coating provides sufficient Li ion transmission channels for efficient transport. This reinforces the structural integrity to withstand volume changes during Li plating/stripping. The highly conformal LiF protective coating minimizes corrosion reactions with carbonate electrolytes and inhibits dendrite formation. Dendrite-free deposition is realized at a high current density of 3 mA cm -2 . LiF@Li|LiFePO 4 full cells with a 200 nm LiF-coated Li anode exhibit up to 85.31% capacity retention over 600 cycles. Stable Li deposition is achieved for 1200 h under lean electrolyte conditions using a 200-nm LiF-coated Li anode. The developed protective coating shows excellent stabilizing effects on Li anodes and is expected to facilitate the optimization and practical application of Li metal anodes with sufficient interphase stability.

electrochemistry
Non‐Fluorinated Cyclic Ether‐Based Electrolyte with Quasi‐Conjugate Effect for High‐Performance Lithium Metal Batteries

Xiao Zhu,Jiawei Chen,Gaopan Liu,Yanbing Mo,Yihua Xie,Kang Zhou,Yonggang Wang,Xiaoli Dong

DOI: https://doi.org/10.1002/anie.202412859

2024-09-02

Angewandte Chemie International Edition

Abstract:Fluorinated ether-based electrolytes are commonly employed in lithium metal batteries (LMBs) to attenuate the coordination ability of ether solvents with Li+ and induce inorganic-rich interphase, whereas fluorination inevitably introduces exorbitant production expenses and environmental anxieties. Herein, a non-fluorinated molecular design strategy has been conceptualized by incorporating methoxy as an electron-donating group to generate a quasi-conjugate effect for tuning the affinity of Li+-solvent, thereby enabling the cyclic ether solvent 2-methoxy-1,3-dioxolane with weak solvation ability and exceptional Li metal-compatibility. Accordingly, the optimized electrolyte exhibits anion-dominant solvation structure for inorganic-rich interphase and fulfills an impressive Li plating/stripping Coulombic efficiency of 99.6%. As-fabricated Li||LiFePO4 full cells with limited Li (N/P = 2.5) showcase a high capacity retention of 83% after 150 cycles, indicating excellent cycling stability. Moreover, the full LMBs demonstrate exceptional tolerance towards a wide temperature range from –20 oC to 60 oC, displaying a remarkable capacity retention of 90% after 110 cycles at –20 oC. Such a molecular design strategy offers a promising avenue for electrolyte engineering beyond fluorination in order to cultivate high-performance LMBs.

chemistry, multidisciplinary
Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Xue-Qiang Zhang,Xin-Bing Cheng,Xiang Chen,Chong Yan,Qiang Zhang

DOI: https://doi.org/10.1002/adfm.201605989

IF: 19

2017-01-20

Advanced Functional Materials

Abstract:Lithium (Li) metal has been considered as an important substitute for the graphite anode to further boost the energy density of Li‐ion batteries. However, Li dendrite growth during Li plating/stripping causes safety concern and poor lifespan of Li metal batteries (LMB). Herein, fluoroethylene carbonate (FEC) additives are used to form a LiF‐rich solid electrolyte interphase (SEI). The FEC‐induced SEI layer is compact and stable, and thus beneficial to obtain a uniform morphology of Li deposits. This uniform and dendrite‐free morphology renders a significantly improved Coulombic efficiency of 98% within 100 cycles in a Li | Cu half‐cell. When the FEC‐protected Li metal anode matches a high‐loading LiNi0.5Co0.2Mn0.3O2 (NMC) cathode (12 mg cm−2), a high initial capacity of 154 mAh g−1 (1.9 mAh cm−2) at 180.0 mA g−1 is obtained. This LMB with conversion‐type Li metal anode and intercalation‐type NMC cathode affords an emerging energy storage system to probe the energy chemistry of Li metal protection and demonstrates the material engineering of batteries with very high energy density. Fluoroethylene carbonate (FEC) additive is used to form a LiF‐rich solid electrolyte interphase (SEI). The FEC‐induced SEI layer is compact and stable, and therefore beneficial to obtain a uniform morphology of Li deposits. When the FEC‐protected Li metal anode matches a high‐loading oxide cathode, a high initial capacity and stable cycling are achieved.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Decorating local Li + solvation structure and optimizing solid electrolyte interphase with potassium trifluoroacetate for dendrites-free lithium metal anodes

Ting Zeng,Chaozhu Shu,Yu Yan,Dayue Du,Haoyang Xu,Lidong Wu,Xiaojuan Wen,Sheng Liu,Guilei Tian,Xinxiang Wang,Ying Zeng

DOI: https://doi.org/10.1016/j.mtnano.2023.100368

IF: 10.3

2023-06-18

Materials Today Nano

Abstract:Fabricating a stable and robust solid electrolyte interphase (SEI) to realize the dendrites-free lithium (Li) deposition morphology in the existing commercial electrolytes remains challenging. Here, the cost-effective potassium trifluoroacetate (KTFA) is proposed as electrolyte additive, in which TFA - anions have capability to involve in constructing SEI with abundant inorganic species by modulating local Li + solvation structure. It is found that TFSI - and NO 3 - anions in the electrolyte can be recruited into Li + primary solvent sheath to replace partial solvent molecules confirmed by classical molecular dynamic (MD) simulations. This is due to the strong polar interaction between TFA - anions and Li + , which is favorable for weakening the coordination of solvent molecules proved by density functional theory (DFT) calculation. Besides, with assistance of electrostatic shielding of K + , the Li deposition morphology is greatly improved. Benefiting from the KTFA additive, Li + transference number (t Li+ ) of 0.68, considerable ionic conductivity (σ Li+ ) of 8.93×10 -4 S cm -1 and stable cycling over 400 h at 1.0 mA cm -2 are obtained. Moreover, the full cells coupling with LiFePO 4 (LFP) cathode exhibit a low overpotential of 212.41 mV and high capacity retention of 87.67% after 283 cycles under the current density of 1.0 C.

materials science, multidisciplinary,nanoscience & nanotechnology
Protecting Li-metal anode with LiF-enriched solid electrolyte interphase derived from a fluorinated graphene additive

Xiaohong Wu,Yuhao Hong,Zhengang Li,Junhao Wang,Haitang Zhang,Yu Qiao,Hongjun Yue,Chunhai Jiang

DOI: https://doi.org/10.1039/d4nr02877e

IF: 6.7

2024-10-08

Nanoscale

Abstract:As the holy-grail material, the Li-metal anode has been considered the potential anode of the next generation of Li-metal batteries (LMBs). However, issues of undesirable dendrite growth and unsatisfactory reversibility of the Li-plating/stripping process during the electrochemical cycling impede further application of LMBs. Herein, we innovatively introduce fluorinated graphene (F-Gr) species as a sacrificial effective electrolyte additive into EC/EMC-based electrolyte, which effectively triggers LiF-enriched (composition) and organic/inorganic species uniform-distributed (structure) SEI film architecture that features robustness and denseness, as well as good stability. With the F-Gr additive, efficient Li-metal anode protection (dendrite-free morphology on Li-metal surface and improved Li plating/stripping reversibility during electrochemical cycling) and significantly enhanced long-term lifespan of LMBs is achieved. Remarkably, classical electrochemical techniques, combined with the surface-sensitive characterizations (XPS and TOF-SIMS), comprehensively and systematically highlight critical structure–activity relationships between the SEI architecture (both composition and structure) and electrochemical performance. These techniques provide deep insights into the optimal electrolyte designation of Li-metal anode in LMBs.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Mixed lithium fluoride-nitride ionic conducting interphase for dendrite-free lithium metal anode

Yi-Feng Liu,Hong-Rui Wang,Jiang-Yu Li,Meng-Jie Chen,Hui Chen,Bing-Yi Lu,Qiang Ma,Xiong-Wei Wu,Xian-Xiang Zeng

DOI: https://doi.org/10.1016/j.apsusc.2020.148294

IF: 6.7

2021-03-01

Applied Surface Science

Abstract:<p>The lithium (Li) metal battery reveals appealing merits in energy density but suffers from problems of dendrite growth and low coulombic efficiency before its applications. The ether electrolytes entitle li metal batteries with more smooth li stripping/deposition but narrow electrochemical stability in contrast to carbonate electrolyte. circumventing this contradictory, a lithium fluoride-nitride mixed ionic conducting interphase was embedded on lithium surface via formulated fluorine-rich carbonate and cyclophosphonitrile, which renders a dendrite-free plating/stripping over 2200 hours and extend the electrochuemcial window of ether electrolyte to 4.5 V with the assistance of experiments and calculating simulations, ensuring LiCoO<sub>2</sub> to operate efficiently over 200 cycles with nearly no capacity decay.</p>

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Lin Chen,Kan-Sheng Chen,Xinjie Chen,Giovanni Ramirez,Zhennan Huang,Natalie R. Geise,Hans-Georg Steinrück,Brandon L. Fisher,Reza Shahbazian-Yassar,Michael F. Toney,Mark C. Hersam,Jeffrey W. Elam,Hans-Georg Steinrück

DOI: https://doi.org/10.1021/acsami.8b04573

2018-07-09

Abstract:Lithium metal anodes can largely enhance the energy density of rechargeable batteries because of the high theoretical capacity and the high negative potential. However, the problem of lithium dendrite formation and low Coulombic efficiency (CE) during electrochemical cycling must be solved before lithium anodes can be widely deployed. Herein, a new atomic layer deposition (ALD) chemistry to realize the low-temperature synthesis of homogeneous and stoichiometric lithium fluoride (LiF) is reported, which then for the first time, as far as we know, is deposited directly onto lithium metal. The LiF preparation is performed at 150 °C yielding 0.8 Å/cycle. The LiF films are found to be crystalline, highly conformal, and stoichiometric with purity levels >99%. Nanoindentation measurements demonstrate the LiF achieving a shear modulus of 58 GPa, 7 times higher than the sufficient value to resist lithium dendrites. When used as the protective coating on lithium, it enables a stable Coulombic efficiency as high as 99.5% for over 170 cycles, about 4 times longer than that of bare lithium anodes. The remarkable battery performance is attributed to the nanosized LiF that serves two critical functions simultaneously: (1) the high dielectric value creates a uniform current distribution for excellent lithium stripping/plating and ultrahigh mechanical strength to suppress lithium dendrites; (2) the great stability and electrolyte isolation by the pure LiF on lithium prevents parasitic reactions for a much improved CE. This new ALD chemistry for conformal LiF not only offers a promising avenue to implement lithium metal anodes for high-capacity batteries but also paves the way for future studies to investigate failure and evolution mechanisms of solid electrolyte interphase (SEI) using our LiF on anodes such as graphite, silicon, and lithium.

materials science, multidisciplinary,nanoscience & nanotechnology
Sulfurized Electrolyte Additives for Stable Lithium Metal Anodes

Govinda Ghimire,Archana Loganathan,Osama Awadallah,Bilal El-Zahab

DOI: https://doi.org/10.1149/ma2022-023187mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:Researchers around the world are striving to develop new materials for energy-efficient and high energy density lithium-ion batteries [1]. Lithium metal with a theoretical specific capacity of 3860 mAh/g, low density (0.534 g/cm 3 ), and the lowest potential (−3.040 V vs. standard hydrogen electrode) is consider the ultimate anode material for high specific energy batteries [2]. However, various issues remain to be address that hinder its use in commercial batteries, namely, cycling stability, Coulombic efficiency, and safety aspects associated with dendritic growth [3]. Inactive lithium, also known as "dead lithium," originating from the dendrites that become separated from the surface over prolonged cycling contribute to anode capacity loss and require high negative to positive electrode capacity ratio (N/P). In addition, due to the extremely low standard redox potential of lithium, electrolytes readily react with the lithium metal surface even without any potential polarization. These reactions lead to the formation of mostly insoluble species in a layer often referred to as solid electrolyte interface, SEI. Ideally, the SEI layer is self-terminating; however, as fresh lithium gets exposed via dendritic growth, SEI formation continues. The steady and uncontrollable growth of SEI throughout the functional life of the battery leads to gradual resistant growth responsible for the capacity fade and eventual "death" of the battery. In previous art, alternative electrolytes, electrolyte additives, and artificial SEIs were studied [4] [5]. For example, the electrolyte additive lithium fluoride (LiF) was used in carbonate electrolytes and provided a strong protective layer that reduced side reactions and improved the life capacity of the battery [6]. Recently, 3-dimensional design of the anode's current collector was shown to accommodate Li deposition resulting in suppressed SEI growth and volume expansion during cycling [7]. In the present work, we use sulfur-containing compounds as additives at a very low concentration (1 – 50 mM) in standard 1M LiPF 6 EC:DMC (v:v = 1:1). Coin cells (2032) were assembled using lithium foil (100 mm thick), separator (Celgard), and NMC811 cathode (> 10 mg/cm 2 ). Cells were first rested and activated at a slow rate then cycled at C/3 and 1C for charge and discharge respectively in prescribed voltage cutoff window. As shown in Figure 1, the sulfur-containing cell had more than 300 cycles before 90% capacity retention relative to the beginning of life (BOL) capacity. The sulfur-free control cell lasted less than 150 cycles above the 90% retention line. Electrochemical impedance spectroscopy (EIS) measurements for cycled cells showed lower interfacial resistance for cells with sulfur-containing additives compared to control cells. The reason for the improved cycle stability can be attributed to the stability afforded by the additives to the SEI layer. Figure 1: A comparison of cell performance between control (black) and sulfur-containing additive (green). The Red line indicates the 90% retention of the battery. References Yoshio, Masaki, Ralph J. Brodd, and Akiya Kozawa. Lithium-ion batteries. Vol. 1. New York: Springer, 2009. Liu, Bin, Ji-Guang Zhang, and Wu Xu. "Advancing lithium metal batteries." Joule2, no. 5 (2018): 833-845. Xiao, Jie, Qiuyan Li, Yujing Bi, Mei Cai, Bruce Dunn, Tobias Glossmann, Jun Liu et al. "Understanding and applying coulombic efficiency in lithium metal batteries." Nature Energy5, no. 8 (2020): 561-568. Tikekar, Mukul D., Snehashis Choudhury, Zhengyuan Tu, and Lynden A. Archer. "Design principles for electrolytes and interfaces for stable lithium-metal batteries." Nature Energy1, no. 9 (2016): 1-7. Wang, Qian, Chengkai Yang, Jijin Yang, Kai Wu, Cejun Hu, Jing Lu, Wen Liu, Xiaoming Sun, Jingyi Qiu, and Henghui Zhou. "Dendrite‐free lithium deposition via a superfilling mechanism for high‐performance Li‐metal batteries." Advanced Materials31, no. 41 (2019): 1903248. Choudhury, Snehashis. "Lithium fluoride additives for stable cycling of lithium batteries at high current densities." In Rational Design of Nanostructured Polymer Electrolytes and Solid–Liquid Interphases for Lithium Batteries, pp. 81-94. Springer, Cham, 2019. Yun, Qinbai, Yan‐Bing He, Wei Lv, Yan Zhao, Baohua Li, Feiyu Kang, and Quan‐Hong Yang. "Chemical dealloying derived 3D porous current collector for Li metal anodes." Advanced Materials28, no. 32 (2016): 6932-6939. Figure 1

A critical examination of the organism described as Bacillus wakefield.

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Nanostructured Li-Rich Fluoride Coated by Ionic Liquid as High Ion-Conductivity Solid Electrolyte Additive to Suppress Dendrite Growth at Li Metal Anode.

Bifunctional fluoropyridinium-based cationic electrolyte additive for dendrite-free Li metal anode

Multifunctional Additives to Realize Dendrite‐Free Lithium Deposition in Carbonate Electrolytes toward Low‐Temperature Li Metal Batteries

Developing ester-based fluorinated electrolyte with LiPO2F2 as an additive for high-rate and thermally robust anode-free lithium metal battery

[Toasted rapeseed meal in broiler fattening diet].

Unraveling and Mitigating the Storage Instability of Fluoroethylene Carbonate-Containing LiPF6 Electrolytes to Stabilize Lithium Metal Anodes for High-Temperature Rechargeable Batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode

Stable Non‐flammable Phosphate Electrolyte for Lithium Metal Batteries via Solvation Regulation by the Additive

Robust tracking control of nonlinear singularly perturbed systems

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Ultrathin LiF-rich solid electrolyte interphase for stable long-life cycling stabilization of lithium metal anodes

Non‐Fluorinated Cyclic Ether‐Based Electrolyte with Quasi‐Conjugate Effect for High‐Performance Lithium Metal Batteries

Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries

Decorating local Li + solvation structure and optimizing solid electrolyte interphase with potassium trifluoroacetate for dendrites-free lithium metal anodes

Protecting Li-metal anode with LiF-enriched solid electrolyte interphase derived from a fluorinated graphene additive

Mixed lithium fluoride-nitride ionic conducting interphase for dendrite-free lithium metal anode

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Sulfurized Electrolyte Additives for Stable Lithium Metal Anodes