Abstract:The achievement of high ionic conductivity for solid‐state electrolyte and low interface resistance between electrodes and electrolyte are keys to successful solid‐state lithium ion batteries. In this paper, an efficient solid‐state electrolyte with dual‐layer structure for dendrite‐free lithium metal battery is designed. A Li metal‐friendly poly(ethylene oxide) (PEO) can serve as low‐voltage stable polymer electrolyte and ceramic‐dominating poly(vinylidene fluoride)–lithium aluminum titanium phosphate (PVDF–LATP) composite solid electrolyte is able to resist higher voltage facing cathode. More importantly, bistrifluoroacetamide (BTFA), as a polar molecular plasticizer, can simultaneously inhibit polymer crystallization, coordinate the delocalization of negative charges, and facilitate the solvation of lithium salts, providing absorption sites for lithium ion migration. The obtained BTFA‐activated PEO/PVDF–LATP double‐layer solid electrolyte exhibits satisfied ionic conductivity (4.4 × 10−4 S cm−1 at 25 °C), high Li+‐transfer number (0.68), and wide electrochemical stable windows (0–5.092 V vs Li/Li+). Moreover, both the assembled full cells with LiFePO4 and high‐voltage LiNi0.8Co0.1Mn0.1O2 cathodes show high initial discharge capacities (163.3 and 219.5 mAh g−1 at 0.1 C, respectively), excellent cycling, and rate performance. Solid‐state lithium metal batteries are designed using bistrifluoroacetamide (BTFA)‐activated double‐layer composite solid electrolyte (BTFA‐DSE) as electrolytes operated. Such BTFA‐DSE exhibits satisfied ionic conductivity (4.4 × 10−4 S cm−1 at 25 °C). Both solid cells with LiFePO4 or LiNi0.8Co0.1Mn0.1O2 cathode show high initial discharge capacities (163.3 and 219.5 mAh g−1 at 0.1 C, respectively), excellent cycling, and rate performance.

Suppression of Dehydrofluorination Reactions of a Li 0.33 La 0.557 TiO 3 -Nanofiber-Dispersed Poly(vinylidene fluoride-co-hexafluoropropylene) Electrolyte for Quasi-Solid-State Lithium-Metal Batteries by a Fluorine-Rich Succinonitrile Interlayer

Realizing High‐Flux Lithium‐Ion Conduction by LaF3 Doping in Quasi‐Solid‐State Electrolytes

Dual fluorination of polymer electrolyte and conversion-type cathode for high-capacity all-solid-state lithium metal batteries

Fluorine-regulated cathode electrolyte interphase enables high-energy quasi-solid-state lithium metal batteries

Stabilizing the Bilateral Interfaces by a PVDF-Based Double-Layer Solid Composite Electrolyte with a Relieved Dehydrofluorination Effect for Solid-State Lithium Metal Batteries

Fluorine-Doped Li 7 La 3 Zr 2 O 12 Fiber-Based Composite Electrolyte for Solid-State Lithium Batteries with Enhanced Electrochemical Performance

Dendrite-free solid-state lithium batteries enabled by fluorine doped Li7La3Zr2O12 composite electrolyte and LiAlF4 Interphase

In Situ construction of PVDF/LLTO electrolyte with stable electrolyte/electrode interphase for integrated solid-state lithium batteries

Bistrifluoroacetamide‐Activated Double‐Layer Composite Solid Electrolyte for Dendrite‐Free Lithium Metal Battery

A Three-Dimensional Electrospun Li6.4La3Zr1.4Ta0.6O12–Poly (Vinylidene Fluoride-Hexafluoropropylene) Gel Polymer Electrolyte for Rechargeable Solid-State Lithium Ion Batteries

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Superionic Fluorinated Halide Solid Electrolytes for Highly Stable Li‐Metal in All‐Solid‐State Li Batteries

Ultrathin Solid Composite Electrolyte Based on Li6.4La3Zr1.4Ta0.6O12/PVDF-HFP/LiTFSI/Succinonitrile for High-Performance Solid-State Lithium Metal Batteries

Fluorinated Carbon Nitride with a Hierarchical Porous Structure Ameliorating PEO for High-Voltage, High-Rate Solid Lithium Metal Batteries

Lithiophilic Quinone Lithium Salt Formed by Tetrafluoro-1,4-Benzoquinone Guides Uniform Lithium Deposition to Stabilize the Interface of Anode and PVDF-Based Solid Electrolytes

Fluorinated carbon nitride with hierarchical porous structure ameliorating PEO for high-voltage, high-rate solid lithium metal batteries

Fluorinating All Interfaces Enables Super-Stable Solid-State Lithium Batteries by in Situ Conversion of Detrimental Surface Li2CO3

PVDF‐HFP via Localized Iodization as Interface Layer for All‐Solid–State Lithium Batteries with Li6PS5Cl Films

Construction of Polyvinylidene Fluoride Buffer Layers for Li1.3Al0.3Ti1.7(PO4)(3) Solid-State Electrolytes toward Stable Dendrite-Free Lithium Metal Batteries

Ternary Stabilization Strategies for Succinonitrile-Based in Situ Polymerized Electrolyte Enabling High-Performance Solid Lithium Metal Batteries