Abstract:Polystyrene divinylbenzene-based ion exchange resins are employed extensively within nuclear power plants (NPPs) and research reactors for purification and chemical control of the cooling water system. To maintain the highest possible water quality, the resins are regularly replaced as they become contaminated with a range of isotopes derived from compromised fuel elements as well as corrosion and activation products including 14C, 60Co, 90Sr, 129I, and 137Cs. Such spent resins constitute a major proportion (in volume terms) of the solid radioactive waste generated by the nuclear industry. Several treatment and conditioning techniques have been developed with a view toward reducing the spent resin volume and generating a stable waste product suitable for long-term storage and disposal. Between them, pyrolysis emerges as an attractive option. Previous work of our group suggests that the pyrolysis treatment of the resins at low temperatures between 300 and 350 °C resulted in a stable waste product with a significant volume reduction (>50%) and characteristics suitable for long-term storage and/or disposal. However, another important issue to take into account is the complexity of the off-gas generated during the process and the different technical alternatives for its conditioning. Ongoing work addresses the characterization of the ion exchange resin treatment's off-gas. Additionally, the application of plasma technology for the treatment of the off-gas current was studied as an alternative to more conventional processes utilizing oil- or gas-fired post-combustion chambers operating at temperatures in excess of 1000 °C. A laboratory-scale flow reactor, using inductively coupled plasma, operating under sub-atmospheric conditions was developed. Fundamental experiments using model compounds have been performed, demonstrating a high destruction and removal ratio (>99.99%) for different reaction media, at low reactor temperatures and moderate power consumption. The role of H2O as an important participant of the oxidation mechanisms in plasma conditions was established. The combination of both processes could represent a simple, safe, and effective alternative for treating spent ion exchange resins with a large reduction of generated gaseous byproducts in fuel cycle facilities where processes that utilize open flames are undesirable.

Water plasmas for the revalorisation of heavy oils and cokes from petroleum refining

Development and Process of Pyrolysis of Light Alkanes to Acetylene by Thermal Plasma

Efficient Treatment of Oily Sludge Via Fast Microwave-Assisted Pyrolysis, Followed by Thermal Plasma Vitrification.

In‐Liquid Plasma Catalysis: Tools for Sustainable H2‐free Heavy Oils Upgrading

Direct Conversion of Poor‐quality Residual Oil to Light Gases in Electricity‐driven Thermal Plasma Reactor

Study of plasma off-gas treatment from spent ion exchange resin pyrolysis

Cost-effective Routes for Catalytic Biomass Upgrading

Long-Chain Hydrocarbons from Nonthermal Plasma-Driven Biogas Upcycling

Analysis of hydrogen production potential from waste plastics by pyrolysis and in line oxidative steam reforming

Plasma-enabled hydrocracking for n-hexadecane by pulsed discharge with liquid alcohols

Biomass Volatiles Reforming by Integrated Pyrolysis and Plasma-Catalysis System for H2 Production: Understanding Roles of Temperature and Catalyst

Energy and economic analysis of alternatives for the valorization of hydrogen rich stream produced in the aqueous phase reforming of pyrolysis bio-oil aqueous fraction

Co-pyrolysis-reforming of Biomass and Residues from Waste Polymer Pyrolysis for CO2 Reduction and Syngas Enhancement

RF-ICP Thermal Plasma for Thermoplastic Waste Pyrolysis Process with High Conversion Yield and Tar Elimination

Synthesis of oxygenated compounds from methane, carbon dioxide and water in liquid phase using a plasma-catalytic system

Carbonaceous materials from a petrol primary oily sludge: Synthesis and catalytic performance in the wet air oxidation of a spent caustic effluent

Effect of hydrotreatment process on the physicochemical properties of a Colombian heavy crude oil post-catalytic aquathermolysis

One-step high-value conversion of heavy oil into H2, C2H2 and carbon nanomaterials by non-thermal plasma

Plasma Assisted Catalytic Conversion of CO2 and H2O Over Ni/Al2O3 in a DBD Reactor

Effective deoxygenation for the production of liquid biofuels via microwave assisted co-pyrolysis of agro residues and waste plastics combined with catalytic upgradation

In situ hydrodeoxygenation of heavy bio-oil using a Ce/Fe-based oxygen carrier in methanol-zero valent aluminum media