Abstract:Hydrogenation, an alternative to conventional cracking, is poised to revolutionize heavy oil upgrading by raising the hydrogen-to-carbon ratio at lower process pressures and temperatures. The emerging low-temperature plasma-enabled hydrogenation is an effective, fast, and environment-friendly process; however, the conversion rate and energy efficiency are still insufficient. To address these limitations, here we propose an innovative bubble-assisted methane plasma-liquid process for heavy oil processing (using ethylbenzene as a model compound) and offer new insights into radical-assisted hydrogenation. Results from the plasma kinetics modeling and density functional theory calculations indicate that ·H and ·CH3 radicals generated by CH4 plasma are two main drivers for ethylbenzene hydrogenation, and their chemical reaction rates with ethylbenzene molecules strongly depend on their spatial distribution in bubbles, which further govern the reaction direction towards ethylbenzene hydrogenation or free radical recombination. Moreover, it is found that by controlling the bubble numbers and plasma parameters, the H density can increase by an order of magnitude from 1.4 × 1020 to 3.88 × 1021 m−3, while the number of hydrogenated aromatic rings increases by ∼ 58%, which further confirms the excellences of the proposed plasma-bubble technology in chemical regulation and feasible processing. In addition, the feasibility of the plasma-enabled hydrogenation has been verified by the experiment, which highlighted the competition between the radical recombination and radical-aromatic ring interactions. Overall, the revealed interaction mechanisms between the plasma-generated radicals and ethylbenzene provide new insights and guiding principles for the future upgrading of heavy oils and other industrial hydrocarbon products.

Plasma-enabled hydrocracking for n-hexadecane by pulsed discharge with liquid alcohols

Heterogeneous liquid discharge cracking of n-hexadecane as a heavy oil model compound: a way to generate plasma in liquid hydrocarbons at low voltage

Plasma-enabled Liquid Ethanol Conversion for Hydrogen Production: Discharge Characteristics and Process Control

Upgrading Phenolic Compounds and Bio-Oil Through Hydrodeoxygenation Using Highly Dispersed Pt/TiO2 Catalyst

Hydrogenolysis and Hydrodeoxygenation of Lignin in a Two-Step Process to Produce Hydrocarbons and Alkylphenols

Hydropyrolysis of N-Hexane and Toluene to Acetylene in Rotating-Arc Plasma

One-step high-value conversion of heavy oil into H2, C2H2 and carbon nanomaterials by non-thermal plasma

Liquid-phase methane bubble plasma discharge for heavy oil processing: Insights into free radicals-induced hydrogenation

COx-free Co-Cracking of N-Decane and CH4 to Hydrogen and Acetylene Using Pulsed Spark Plasma

Characteristics of Enhanced Plasma in Ethanol Liquid-Phase Discharge with a Third Electrode

Insights into the role of H radicals in a plasma-enabled hydrogenation of heavy oil model compound

The reformation of liquid hydrocarbons in an aqueous discharge reactor

In‐Liquid Plasma Catalysis: Tools for Sustainable H2‐free Heavy Oils Upgrading

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process

In situ hydrodeoxygenation of heavy bio-oil using a Ce/Fe-based oxygen carrier in methanol-zero valent aluminum media

Aqueous Phase Reforming of Biocrude Derived from Lignocellulose Hydrothermal Liquefaction: Conditions Optimization and Mechanism Study

Catalytic Upgrading of Water-Soluble Biocrude from Hydrothermal Liquefaction of Chlorella

Hydro-upgrading of algal bio-oil in tetralin for the production of high-quality liquid fuel: Process intensification

Direct Conversion of Poor‐quality Residual Oil to Light Gases in Electricity‐driven Thermal Plasma Reactor

Biocrude Upgrading in Different Solvents after Microalgae Hydrothermal Liquefaction

Enhanced hydrogen production by methanol decomposition using a novel rotating gliding arc discharge plasma