Abstract:Plasma-based dry reforming in an atmospheric dielectric barrier discharge (DBD) reactor has been thoroughly studied by combination of experiments and detailed kinetics simulation. With the assistances of in-situ optical emission spectroscopy (OES) measurements and reaction pathway analysis based on plasma kinetic simulation considering non-constant electric field and thermal effects, this study provided deep insights into the reaction mechanism of plasma-based dry reforming under varied feeding gas composition, gas residence time and operation temperature. A CH4 conversion as high as 44.76 % could be achieved without catalyst at 300 °C, with an SEI of 78 J/cm3 and feeding CH4 ratio of 50 %. Increase of feeding CH4 proportions were found to enhance the generation of C2 and C3 hydrocarbons. Consistently, the OES analysis showed that the relative intensities of spectra bands induced by deexcitation of CH, CO, and C2 also increased monotonically. With the same increment in SEI, increasing gas residence time led to larger promotions in CH4 and CO2 conversion, as being compared to increase of input power. The reason could be explained as that CH4 and CO2 molecules experienced more successive micro-discharges with a longer gas residence time, so more energy would be devoted into CH4/CO2 conversion, whereas more energy was dissipated into heat as rudely increased the discharge power due to the limit of reaction time. CO2 conversion continuously decreased with increasing gas temperature, owing to the recombination of CO and O enhanced at higher gas temperatures. Reaction pathway analysis showed that CH4 conversion was mainly induced by electronic dissociation and ionization at the discharge stage, while CO2 was mainly converted by recombination reaction CO2 + CH2 → CH2O + CO and also electron collision vibrational reaction e + CO2 → e + CO2(vn). The formation of C2 hydrocarbon products was supposed to follow the path of CH4 ↔ CH3/CH → C2H6 ↔ C2H5 ↔ C2H4 → C2H2.

The reformation of liquid hydrocarbons in an aqueous discharge reactor

A resource recycling technique of hydrogen production from the catalytic degradation of organics in wastewater

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

GLIDING ARC DISCHARGE PLASMA ASSISTED REFORMING OF METHANE INTO HYDROGEN WITH OXYGEN AND WATER VAPOR

Heterogeneous liquid discharge cracking of n-hexadecane as a heavy oil model compound: a way to generate plasma in liquid hydrocarbons at low voltage

Process Optimization for Microcystin-Lr Degradation by Response Surface Methodology and Mechanism Analysis in Gas-Liquid Hybrid Discharge System

Plasma-enabled hydrocracking for n-hexadecane by pulsed discharge with liquid alcohols

Wet Conversion of Methane and Carbon Dioxide in a DBD Reactor

Reforming of Methane and Carbon Dioxide by DC Water Plasma at Atmospheric Pressure

Investigation of Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor

Degradation of 4-chlorophenol in different gas–liquid electrical discharge reactors

An efficient treatment for degradation of high-concentration xylene gas via water falling film discharge in synergy with silver catalysis

Using a Novel Pulsed High-Voltage Gas–liquid Hybrid Discharge Continuous Reactor for Removal of Organic Pollutant in Oxygen Atmosphere

Investigation of Highly Efficient CO2 Hydrogenation at Ambient Conditions Using Dielectric Barrier Discharge Plasma

Reaction mechanism explorations on non-thermal plasma reforming of CO2-CH4 by combining kinetics modeling and emission spectroscopy measurements

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

Expanded Reactor Engineering Calculations for the Oxidative Coupling of Methane

Structural Optimization of Reactor for the Enhancement of CO2 Electrochemical Reduction Based on Gas–Liquid Mixing Flow Model

Understanding the chemical kinetics for plasma in liquid: Reaction mechanism of ethanol reforming in microwave discharge

Reforming of CH4 and CO2 by Combination of Alternating Current-Driven Nonthermal Arc Plasma and Catalyst

Use of an Intermediate Solid-State Electrode to Enable Efficient Hydrogen Production from Dilute Organic Matter