Abstract:Hydrogen production from ethanol reforming using microwave plasmas has great potential. In this study, a microwave plasma torch is used as a plasma source. Air is used as a discharge gas to generate the plasma. Ethanol and air are mixed and injected directly into the plasma reaction zone in a vortex flow. The effects of the oxygen-to-ethanol molar ratio (O2/Et), ethanol flow rate, and absorbed microwave power on the reforming results are investigated. When the O2/Et exceeds 0.9, ethanol is completely converted. The hydrogen selectivity is the largest when the O2/Et is 1.1, which is about 66.5%. The maximum hydrogen production rate is 2.19 mol(H2)/mol(C2H5OH). The best carrier gas residence time is 0.64-0.81 s. An appropriate increase in the ethanol flow rate can improve the ethanol conversion rate and energy efficiency while reducing the hydrogen selectivity and hydrogen yield, so the ethanol flow rate should not exceed 42.1 mL/min. The cost of hydrogen production is minimum [$3.66/kg(H2)] when the ethanol flow rate is 42.1 mL/min. The positive effect of the absorbed microwave power on the reforming reaction is significant, but too much microwave power also reduces energy efficiency. The optimum experimental conditions are an O2/Et of 0.9, an ethanol flow rate of 42.1 mL/min, and an absorbed microwave power of 700 W. The maximum energy yield is 861.91 NL(H2)/kWh at an absorbed microwave power of 700 W. The main reforming products are H2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H6, C3H8, C4H10n, and C4H10i. The content of C2 or higher hydrocarbons is considerably low. Almost no deposited carbon is generated in the experiment, which means that the design of the reforming system is effective in suppressing carbon deposition.

GLIDING ARC DISCHARGE PLASMA ASSISTED REFORMING OF METHANE INTO HYDROGEN WITH OXYGEN AND WATER VAPOR

Progress on Reforming of Carbon Dioxide and Methane to Synthesis Gas by Thermal Plasma

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

Hydrogen Production From Partial Oxidation Of Methane Using An Ac Rotating Gliding Arc Reactor

Reforming of Methane and Carbon Dioxide by DC Water Plasma at Atmospheric Pressure

Dry Reforming of Methane with Carbon Dioxide Using Pulsed Dc Arc Plasma at Atmospheric Pressure

Plasma Assisted Dry Methane Reforming Using Gliding Arc Gas Discharge: Effect of Feed Gases Proportion

Reforming of CH4 and CO2 by Combination of Alternating Current-Driven Nonthermal Arc Plasma and Catalyst

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

Rotating Gliding Arc Assisted Methane Partial Oxidation for Hydrogen Production

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

Hydrogen Production from Ethanol Reforming by a Microwave Discharge Using Air as a Working Gas

CH4 reforming with CO2 using a nanosecond pulsed dielectric barrier discharge plasma

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Investigation of Dry Reforming of Methane in a Dielectric Barrier Discharge Reactor

Gliding Arc Discharge Plasma Assisted Decomposition of Ammonia into Hydrogen

Recent Advances in Plasma-Based Methane Reforming for Syngas Production

Production of hydrogen-rich gas from methane by thermal plasma reform

Experimental study on dry reforming of methane by a plasma catalytic hybrid system

Rotating Gliding Arc Assisted Methane Decomposition in Nitrogen for Hydrogen Production