Abstract:Hydrogen production from ethanol reforming using microwave plasmas has great potential. In this study, a microwave plasma torch is used as a plasma source. Air is used as a discharge gas to generate the plasma. Ethanol and air are mixed and injected directly into the plasma reaction zone in a vortex flow. The effects of the oxygen-to-ethanol molar ratio (O2/Et), ethanol flow rate, and absorbed microwave power on the reforming results are investigated. When the O2/Et exceeds 0.9, ethanol is completely converted. The hydrogen selectivity is the largest when the O2/Et is 1.1, which is about 66.5%. The maximum hydrogen production rate is 2.19 mol(H2)/mol(C2H5OH). The best carrier gas residence time is 0.64-0.81 s. An appropriate increase in the ethanol flow rate can improve the ethanol conversion rate and energy efficiency while reducing the hydrogen selectivity and hydrogen yield, so the ethanol flow rate should not exceed 42.1 mL/min. The cost of hydrogen production is minimum [$3.66/kg(H2)] when the ethanol flow rate is 42.1 mL/min. The positive effect of the absorbed microwave power on the reforming reaction is significant, but too much microwave power also reduces energy efficiency. The optimum experimental conditions are an O2/Et of 0.9, an ethanol flow rate of 42.1 mL/min, and an absorbed microwave power of 700 W. The maximum energy yield is 861.91 NL(H2)/kWh at an absorbed microwave power of 700 W. The main reforming products are H2, CO, CO2, CH4, C2H2, C2H4, C2H6, C3H6, C3H8, C4H10n, and C4H10i. The content of C2 or higher hydrocarbons is considerably low. Almost no deposited carbon is generated in the experiment, which means that the design of the reforming system is effective in suppressing carbon deposition.

Warm plasma catalytic coreforming of dilute bioethanol and methane for hydrogen production

Ammonia Synthesis Via Nitrogen-Coupled Methane Conversion at Ambient Temperature and Plasma Conditions

A near-zero carbon emission methanol production through CO2 hydrogenation integrated with renewable hydrogen: Process analysis, modification and evaluation

Plasma Activation of Methane for Hydrogen Production in a N2 Rotating Gliding Arc Warm Plasma: A Chemical Kinetics Study

Biomass Volatiles Reforming by Integrated Pyrolysis and Plasma-Catalysis System for H2 Production: Understanding Roles of Temperature and Catalyst

Enhanced hydrogen production using a tandem biomass pyrolysis and plasma reforming process

Hydrogen Production from Ethanol Reforming by a Microwave Discharge Using Air as a Working Gas

Production of hydrogen-rich gas from methane by thermal plasma reform

Enhanced hydrogen production from methanol by liquid-phase array electrode plasma discharge

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Biogas Reforming for Hydrogen-Rich Syngas Production over a Ni–K/Al2O3 Catalyst Using a Temperature-Controlled Plasma Reactor

Photothermal methane coupling into liquid fuels with hydrogen evolution over nanocatalysts based on layered double hydroxide (LDH)

Plasma for Ethanol Reforming

Distributed electrified heating for efficient hydrogen production

Enhanced hydrogen production by methanol decomposition using a novel rotating gliding arc discharge plasma

Plasma‐assisted Synthesis of Methanol Through Hydrogenation of Carbon Dioxide with Non‐Noble Metal Mixed Oxide Catalysts

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Ternary NiMo-Bi liquid alloy catalyst for efficient hydrogen production from methane pyrolysis

Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

Hydrogen and carbon produced by fluidized bed catalytic methane decomposition

Engineering Ni-Co Bimetallic Interfaces for Ambient Plasma-Catalytic CO2 Hydrogenation to Methanol