Abstract:Abstract The realization of a table-top tunable deep-ultraviolet (UV) laser source with excellent noise properties would significantly benefit the scientific community, particularly within imaging and spectroscopic applications, where source noise has a crucial role. Here we provide a thorough characterization of the pulse-to-pulse relative intensity noise (RIN) of such a deep-UV source based on an argon (Ar)-filled anti-resonant hollow-core (AR HC) fiber. Suitable pump pulses are produced using a compact commercially available laser centered at 1030 nm with a pulse duration of 400 fs, followed by a nonlinear compression stage that generates pulses with 30 fs duration, 24.2 μJ energy at 100 kHz repetition rate and a RIN of < 1%. Pump pulses coupled into the AR HC fiber undergo extreme spectral broadening creating a supercontinuum, leading to efficient energy transfer to a phase-matched resonant dispersive wave (RDW) in the deep-UV spectral region. The center wavelength of the RDW could be tuned between 236 and 377 nm by adjusting the Ar pressure in a 140 mm length of fiber. Under optimal pump conditions the RIN properties were demonstrated to be exceptionally good, with a value as low as 1.9% at ~ 282 nm. The RIN is resolved spectrally for the pump pulses, the generated RDW and the broadband supercontinuum. These results constitute the first broadband RIN characterization of such a deep-UV source and provide a significant step forward towards a stable, compact and tunable laser source for applications in the deep-UV spectral region.

Low intensity noise high-power tunable fiber-based laser around 1007 nm

Low-noise single-frequency 50 W fiber laser operating at 1013 nm

Low-Noise Narrow-Linewidth Fiber Laser at 1550 nm (June 2003)

Robust low-noise 795-nm single-frequency fiber laser with continuous frequency tuning

Watt-level single-frequency tunable Neodymium MOPA fiber laser operating at 915-937 nm

Robust All-Fiber 200W Single Frequency Laser at 1064 nm with Low Intensity Noise

Neodymium laser-pumped ultra-low noise tunable Brillouin fiber laser around 920 nm

An ultra-flat, low-noise and linearly polarized fiber supercontinuum source covering 670 nm-1390 nm

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

400 Mw Ultrashort Cavity Low-Noise Single-Frequency Yb^3+-doped Phosphate Fiber Laser

Near thermal noise limit, 5W single frequency fiber laser base on the ring cavity configuration

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

400 mW ultrashort cavity low-noise single-frequency Yb³⁺-doped phosphate fiber laser.

Low-noise tunable deep-ultraviolet supercontinuum laser

Ultralow-intensity-noise single-frequency fiber-based laser at 780 nm

Power scaling of high-power linearly polarized fiber lasers with <10 GHz linewidth

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

Low Phase Noise, Record-High Power Optical Parametric Oscillator Tunable from 2.7-4.7 μm for Metrology Applications