Abstract:Recent advances in the development of ultra-low loss silicon nitride integrated photonic circuits have heralded a new generation of integrated lasers capable of reaching fiber laser coherence. However, these devices presently are based on self-injection locking of distributed feedback (DFB) laser diodes, increasing both the cost and requiring tuning of laser setpoints for their operation. In contrast, turn-key legacy laser systems use reflective semiconductor optical amplifiers (RSOA). While this scheme has been utilized for integrated photonics-based lasers, so far, no cost-effective RSOA-based integrated lasers exist that are low noise and simultaneously feature fast, mode-hop-free and linear frequency tuning as required for frequency modulated continuous wave (FMCW) LiDAR or for laser locking in frequency metrology. Here we overcome this challenge and demonstrate a RSOA-based, frequency agile integrated laser, that can be tuned with high speed, with high linearity at low power. This is achieved using monolithic integration of piezoelectrical actuators on ultra-low loss silicon nitride photonic integrated circuits in a Vernier filter-based laser scheme. The laser operates at 1550 nm, features 6 mW output power, 400 Hz intrinsic laser linewidth, and allows ultrafast wavelength switching within 7 ns rise time and 75 nW power consumption. In addition, we demonstrate the suitability for FMCW LiDAR by showing laser frequency tuning over 1.5 GHz at 100 kHz triangular chirp rate with nonlinearity of 0.25% after linearization, and use the source for measuring a target scene 10 m away with a 8.5 cm distance resolution.

Watt-level single-frequency tunable Neodymium MOPA fiber laser operating at 915-937 nm

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Low intensity noise high-power tunable fiber-based laser around 1007 nm

All-fiberized master oscillator power amplifier structured narrow-linewidth nanosecond pulsed laser with 505 W average power

Low-noise single-frequency 50 W fiber laser operating at 1013 nm

High energy single-frequency double-pulse hybrid MOPA system

60 mW 1.5 /spl mu/m single-frequency low-noise fiber laser MOPA

1.2 kW, 20 kHz Nanosecond Nd:YAG Slab Laser System

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

Widely-tunable All-Fiber Tm Doped MOPA with >1 Kw of Output Power

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

Single-frequency pulsed laser source with hybrid MOPA configuration

High Peak Power Hybrid Mopa Laser With Tunable Pulse Repetition Frequency And Pulse Duration

1535–1620 Nm Widely Tunable Watt-Level Single-Mode Er:Yb Codoped All-Fiber MOPA

Widely Tunable Pulse Duration 100 mJ Single-Mode MOPA System Based on Yb-Doped Tapered Double-Clad Fiber and Nd:YAG Solid-State Amplifiers

C- and L-Bands Wavelength-Tunable Mode-Locked Fiber Laser

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Watt-level all polarization-maintaining femtosecond fiber laser source at 1100 nm

Frequency agile photonic integrated external cavity laser

Robust low-noise 795-nm single-frequency fiber laser with continuous frequency tuning