Abstract:Abstract Vegetable oils are a highly promising alternative to produce various lubricants, owing to their biodegradability and eco-friendliness. In comparison to mineral oil, these oils possess a higher flash point and viscosity index, along with superior lubricating properties. Additionally, most of the vegetable oils are easily accessible in local markets in India. However, their industrial application is limited by poor thermal and oxidative stability, which can be addressed through chemical modification, the addition of appropriate additives, or by blending these oils. Greases, characterized by their semi-solid consistency, are widely used lubricants. Most of the grease production is based on mineral oils as base oil and lithium soap as a thickener. These materials are not only non-biodegradable but also scarce and have health implications. Consequently, biodegradable grease represents an eco-friendly and healthy alternative. Grease made using vegetable oils with the required properties has the potential to bring about revolutionary changes. The present work focuses on the feasibility of using chemically modified blended rice bran oil (RBO) and Calophyllum inophyllum oil (CIO) as a bio-lubricant. The oils undergo a two-step modification process, involving a transesterification reaction followed by epoxidation. Significant improvements have been observed in the chemical properties (acid, peroxide, and iodine values) of transesterified epoxidized rice bran oil Calophyllum inophyllum oil mixture–50:50 (ETRCIO) when compared with Unmodified Rice bran oil Calophyllum inophyllum oil mixture–50:50 (RCIO). The acid value, peroxide value, and iodine value improved by 91.66%, 87.08%, and 15.78% respectively. The rheological, tribological, and chemical properties of the blended samples have been evaluated and compared to pure oils using American Society for Testing and Materials (ASTM) and Indian Standards (IS). Additionally, ETRCIO was used to develop a bio-grease, and its tribological properties were extensively analyzed. The mean coefficient of friction (COF) and wear scar diameter (WSD) of the ETRCIO grease sample improved by 10.20% and 29.32% respectively when compared with that of commercially available grease. These findings indicate that the ETRCIO bio-grease exhibits superior tribological properties in comparison to commercially available grease.

Experimental and statistical analysis of apricot (Prunus armeniaca) oil-based biolubricant under various temperature conditions

Achieving the Good Thermal-Stability and Lubricity Via a Dihydroxy Biolubricant from the Agro-Waste of Codonopsis Pilosula

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants

A Comparative Investigation on the Tribological Performance and Physicochemical Properties of Biolubricants of Various Sources, a Petroleum-Based Lubricant, and Blends of the Petroleum-Based Lubricant and Crambe Oil

Sustainable bio-lubricant blends from mustard oil and castor oil: physico-chemical, thermal, rheological, and tribological characterizations for eco-friendly alternatives to commercial engine oil

Combined Effect of Phosphonium Ionic Liquid and Copper Oxide Nanopowder as Additives to the Bio-based Lubricant During Tribological Analysis

Potential of palm oil with tert-Butylhydroquinone in place of mineral oil lubricant for reducing environmental degradation

Characterization of bio-lubricants with nanoparticles additives

Effect of engine oil dilution by waste ayurvedic oil biodiesel on tribological behavior of liner-ring tribo pair material

Evaluation of tribological properties of vegetable oil–based ionanolubricants: An experimental study

A bibliometric analysis on the tribological and physicochemical properties of vegetable oil–based bio-lubricants (2010–2021)

Improving physicochemical and tribological characteristics of bio-lubricants using carbon-based hybrid nanomaterials modified by tertiary-butyl-hydroquinone

Evaluation of the impact of oleic acid-capped Al 2 O 3 nanoparticles on the tribological performance of conventional lube oil

Formulation and evaluation of bio-grease from the blend of chemically modified rice bran oil and Calophyllum inophyllum oil

Investigation on the lubrication component and mechanism for a biolubricant isolated from the agro-waste resource of Codonopsis pilosula

Wear Behavior of Titanium Alloy Lubricated with Palm Olein as Bio-Lubricant Using Pin-On-Disk Tester

Tribological evaluation of date seed oil and castor oil blends with halloysite nanotube additives as environment friendly bio-lubricants

Analysis of Tribology Properties of Trimethylolpropane-based Lubricant by Molecular Dynamics

Tribo-Dynamic analysis of nano-enhanced palm blend lubricant for roller bearing application

Enhanced tribological performance of transesterified corn oil biodiesel blends with CuO and TiO 2 nanoparticles: experimental analysis on wear and friction reduction using environment friendly lubricants

A Comparative Analysis of the Lubricating Performance of an Eco-Friendly Lubricant vs Mineral Oil in a Metallic System