Abstract:It is well known that lubricating oils reduce the friction coefficient between two surfaces in contact. Since petroleum lubricants are toxic and have a low biodegradability, they are typically not appropriate for the environment. As a result, as public worries about a pollution-free environment grow, so does the demand for lubricants that are acceptable to the environment. The primary rationale for utilizing vegetable oils in forthcoming bio-lubricant formulations is their high lubricating performance, low toxicity, sustainable, and biodegradability. Plant oils hold great potential as a foundational fluid for bio-lubricants, since their synthetic and vegetable oil-based esters provide the most environmentally friendly option for creating lubricants. In this study, Jatropha and Jojoba raw oil were chemically modified via epoxidation followed by transesterification to produce bio-lubricants. Thus, the aim of this work is to develop a bio-lubricant from jatropha and jojoba methyl ester, further adding nanoparticles multiwalled nanotubes and titanium dioxide for improvement of tribological properties. The chemical modification of the jatropha and jojoba oil results in a decrease in iodine value, resulting in the breaking of carbon bonds. Viscosity tests were performed using the Anton Par MCR 92 Rheometer, with temperature ranging from 30°C to 80°C. Thermal stability measurements of bio-lubricants were performed using PerkinElmer's Thermogravimetric analyzer − 4000 instrument and thermal degradation temperature for Epoxidized Jatropha – sulfuric acid, Epoxidized Jatropha – hydrochloric acid, Epoxidized Jojoba – sulfuric acid and Epoxidized Jojoba – Hydrochloric acid samples are 238°C, 224°C, 230°C, and 244°C, respectively. The 94.68% and 79.85% reduction in wear was obtained for Epoxidized Jojoba with hydrochloric acid, titanium dioxide and epoxidized Jatropha with sulfuric acid, multiwalled carbon nanotubes in comparison with their epoxidized samples. The coefficient of friction of Epoxidized Jatropha with sulfuric acid, multiwalled carbon nanotubes and Epoxidized Jojoba with Hydrochloric acid, Titanium dioxide sample was found to be 0.061 and 0.059, respectively.

Tribo-Dynamic analysis of nano-enhanced palm blend lubricant for roller bearing application

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

Enhancing the tribological properties of hydraulic oil-based nanolubricants using MWCNT-SiO2 hybrid nanoparticles

Tribological Analysis of a Hydrodynamic Journal Bearing under the Influence of Synthetic and Biolubricants

Preparation and characterization of bio-based nano cutting fluids for tribological applications

Tribology Characteristic of Ball Bearing SKF RB-12.7/G20W using SAE 5W-30 Lubricant with Carbon-Based Nanomaterial Addition

Tribological evaluation of date seed oil and castor oil blends with halloysite nanotube additives as environment friendly bio-lubricants

Effect of Boundary Layer Modification and Enhanced Thermal Characteristics on Tribological Performance of Alumina Nanofluids Dispersed in Lubricant Oil

Tribological and Vibration Studies on Newly Developed Nanocomposite Greases Under Boundary Lubrication Regime

Tribological roles of MoS2 and PTFE nano oils at the rolling/sliding point contacts: Conventional versus textured contacts

Tribological Analyses of Modified Jatropha Oil with hBN and Graphene Nanoparticles as An Alternative Lubricant for Machining Process

Tribological studies of lubricated textured point contacts using MoS2 and PTFE nano oils under the reciprocating motion

Performance Analysis of Experimentally Characterized Titanium Dioxide and Zinc Oxide Nano-Lubricated Journal Bearing Considering Thermal and Cavitation Effects

Nanotechnology implications for high performance lubricants

Investigation of friction and vibration performance of lithium complex grease containing nano-particles on rolling bearing

Lubrication mechanism analysis of nickel-carbon-based tribological layer on sliding interfaces in automotive engines

Tribological investigations of 2D nanostructured lamellar materials as additives to castor oil-derived lithium grease

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Improving physicochemical and tribological characteristics of bio-lubricants using carbon-based hybrid nanomaterials modified by tertiary-butyl-hydroquinone

Tribological evaluation of steel–steel contact surface lubricated by graphene nanoparticle-enhanced lubricant

Characterization of bio-lubricants with nanoparticles additives