The effect of porosity size and oxidation on the HCF property of nickel-based single crystal superalloy at 980 °C

Wen Jiang,Piao Li,Wei-Xing Yao,Shao-Shi Rui,Hui-Ji Shi,Jie Huang

DOI: https://doi.org/10.1016/j.tafmec.2022.103423

IF: 4.374

2022-08-01

Theoretical and Applied Fracture Mechanics

Abstract:The high-cycle fatigue (HCF) lives and fatigue limits of nickel-based single crystal superalloys (NBSX) with different porosity sizes were investigated at 980 °C. The test results show that the failure cracks prone to initiate from large internal pores, and the HCF properties are mainly controlled by the critical pore size. However, when the stress is close to the fatigue limit, the secondary cracks will initiate from the oxide layer obviously, which will further weaken the HCF properties. Therefore, a life prediction model based on the critical plane parameter and oxidation kinetic equation was proposed to evaluate the effect of porosity size and oxidation on the HCF life of NBSX. Then, combing the life prediction model and Murakami model, a fatigue limit evaluation model was presented. Compared with test results, the life prediction model and fatigue limit evaluation model are accurate and effective. Finally, the defect-tolerance analysis was carried out by the Kitagawa-Takahashi diagram, which could be a visual guide for the anti-fatigue design of NBSX.

engineering, mechanical,mechanics