Abstract:It is crucial for thermoelectric (TE) devices to obtain both p-type and n-type materials and control charge carrier density. However, n-type thermoelectric materials are quite deficient and have lower thermoelectric properties. We report one oxygen-rich polymer named polyethylene glycol (PEG) for converting p-type single-walled carbon nanotubes (SWCNTs) to air-stable n-type thermoelectric materials. When pristine SWCNTs were doped with 2 mg·mL–1 PEG in an ethanol solution, the optimal Seebeck coefficient of PEG/SWCNT composites reached −50.8 μV·K–1. The result of ultraviolet photoelectron spectroscopy demonstrated that the lone pair of oxygen atoms in the PEG chain has electron transferability to SWCNTs. According to the hard and soft acid and base theory, sodium hydroxide (NaOH) was further introduced to improve air stability and thermoelectric performance of doped SWCNTs. As a result, PEG/NaOH/SWCNT composites achieved the highest power factor of 173.8 μW·m–1·K–2 at 300 K. Meanwhile, their final changes in electrical conductivity and the Seebeck coefficient are less than 8% in the investigation of air stability over two months. Inspired by this finding, we fabricated the TE generator composed of the pristine p-type SWCNTs and n-type PEG/NaOH/SWCNT composites. The maximum output power of this robust TE device reached 5.3 μW at a temperature gradient of 76 K, which is superior to many reported TE devices. Moreover, the experimental procedure is attractive as a sustainable process for materials preparation. Our study has indicated that the oxygen-rich polymer-functionalized SWCNTs have huge potential for developing air-stable n-type carbon-based thermoelectric materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c04786?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c04786</a>.Additional information, including TE performance, SEM images, TGA curves, carrier concentration, and carrier mobility (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c04786/suppl_file/am1c04786_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Achieving air-stable n-type single-walled carbon nanotubes with high thermoelectric performance by doping with polyethylene glycol and N,N-dimethylferrocenemethylamine

Oxygen-Rich Polymer Polyethylene Glycol-Functionalized Single-Walled Carbon Nanotubes Toward Air-Stable n-Type Thermoelectric Materials

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites

Synergistic effects of hybrid n-doping on the thermoelectric performance and air-stability of water-processable single-walled carbon nanotubes

Stable N-Type Single-Walled Carbon Nanotube/Mesh Sheets by Cationic Surfactant Doping and Fluoropolymer Coating for Flexible Thermoelectric Generators

Solvent‐Mediated N‐type Doping of SWCNTs to Achieve Superior Thermoelectric Power Factor

Ultra-long air-stability of n-type carbon nanotube films with low thermal conductivity and all-carbon thermoelectric generators

High-Performance N-Type Carbon Nanotube Composites: Improved Power Factor by Optimizing the Acridine Scaffold and Tailoring the Side Chains

Facile preparation of air-stable n-type thermoelectric single-wall carbon nanotube films with anionic surfactants

Enhanced Thermoelectric Properties of Stable n-Type Ferrocene Derivatives-Doped Polyethylenimine/Single-Walled Carbon Nanotube Composite Films

Simultaneously Achieving Green p- and n-Type Single-Walled Carbon Nanotube Composites by Natural Amino Acids with High Performance for Thermoelectrics

Promoting the Thermoelectric Performance of Single-Walled Carbon Nanotubes by Inserting Discotic Liquid-Crystal Molecules

High-performance g-C 3 N 4 coated single-walled carbon nanotube composite films for flexible thermoelectric generators

Enhancement of thermoelectric property of carbon nanotubes by p-type doping with judicious molecular design of spiro-bifluorene derivatives

Vertically Designed High-Performance and Flexible Thermoelectric Generator Based on Optimized PEDOT:PSS/SWCNTs Composite Films

The Enhanced Thermoelectric and Mechanical Performance of Polythiophene/Single-Walled Carbon Nanotube Composites with Polar Ethylene Glycol Branched-Chain Modifications

Synergistically Boosting Thermoelectric Performance of PEDOT:PSS/SWCNT Composites via the Ion-Exchange Effect and Promoting SWCNT Dispersion by the Ionic Liquid

Effective approaches to produce high performance single-walled carbon nanotubes/platinum based hybrid films by inserting thermoelectric material with high seebeck coefficient

Synergistic effects of water and carbon dioxide on the reversible thermoelectric behaviors of polyethyleneimine/single-walled carbon nanotubes composites

Flexible Thermoelectric Films Based on Bi2Te3 Nanosheets and Carbon Nanotube Network with High n-Type Performance

Hf-Contacted High-Performance Air-Stable N-Type Carbon Nanotube Transistors