Abstract:Mussel-inspired polydopamine (PDA) can serve as building blocks and interfaces in designing functional materials. Here, the use of PDA as an interlayer between polyaniline (PANi) and multidimensional carbon materials, such as graphene quantum dots (GQD), multiwalled carbon nanotubes (MWCNT), and graphene nanosheets (GNS), to improve the thermoelectric performance of p-type polymer-based materials has been reported. The introduction of PDA promotes the carrier mobility of GQD/PDA/PANi, CNT/PDA/PANi, and GNS/PDA/PANi ternary composites due to the superior adhesive property of PDA. An optimal conductivity of 4.98 × 104 S m–1 and a power factor of 92.17 μW m–1 K–2 at 363 K are achieved in GNS/PDA/PANi, which are much higher than the values of GNS/PDA and GNS/PANi. More surprisingly, despite the fact that GQD/PDA, CNT/PDA, and GNS/PDA binary composites show p-type properties, the pyrolysis treatment of GQD/PDA, CNT/PDA, and GNS/PDA at 800 °C results in a gain in both the electrical conductivity and negative Seebeck coefficient of c-GQD/PDA, c-CNT/PDA, and c-GNS/PDA. The c-CNT/PDA composites possess the highest Seebeck value of −30.2 μV K–1 and a maximum power factor value of 35.57 μW m–1 K–2. Finally, a flexible thermoelectric generator with 24 thermoelectric units composed of GNS/PDA/PANi and c-CNT/PDA is demonstrated, which gives an output voltage of 52.8 mV at a temperature difference of 60 °C.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01457?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01457</a>.Thermal conductivity measurements and TE characterization; electrical conductivity and Seebeck coefficient of all the samples at 303, 333, and 363 K; TE properties of pristine GQD, CNT, and GNS at 363 K; FTIR spectra, XPS spectra, TEM images, and size distributions of GQD; appearance of GNS dispersion solution and GNS/PDA dispersion solution in water after ultrasonication; carrier mobility and carrier concentration of PANi-based composites at 363 K; PF and thermal conductivity of PDA and PDA-based composite materials at 363 K; PF and thermal conductivity of PANi-based binary composites at 363 K; digital photos of n-type composite films of bending 150 and 180° and after bending 180°; cross-sectional SEM images of n-type composite films of bending 180° and magnification times; digital photos showing bending of p-type composite films by 150 and 180° and after bending to 180°; cross-sectional SEM images showing the bending of p-type composite films by 180° and magnification times; and schematic diagram of the device configuration and the working principle of TEG (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01457/suppl_file/am1c01457_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Simultaneously Achieving Green p- and n-Type Single-Walled Carbon Nanotube Composites by Natural Amino Acids with High Performance for Thermoelectrics

High performance of p-type and n-type thermoelectric materials based on liquid crystal mixture and single-walled carbon nanotube composites

High-Performance N-Type Carbon Nanotube Composites: Improved Power Factor by Optimizing the Acridine Scaffold and Tailoring the Side Chains

Achieving air-stable n-type single-walled carbon nanotubes with high thermoelectric performance by doping with polyethylene glycol and N,N-dimethylferrocenemethylamine

High-performance g-C 3 N 4 coated single-walled carbon nanotube composite films for flexible thermoelectric generators

Oxygen-Rich Polymer Polyethylene Glycol-Functionalized Single-Walled Carbon Nanotubes Toward Air-Stable n-Type Thermoelectric Materials

Solvent‐Mediated N‐type Doping of SWCNTs to Achieve Superior Thermoelectric Power Factor

Enhancement of thermoelectric property of carbon nanotubes by p-type doping with judicious molecular design of spiro-bifluorene derivatives

Promoting the Thermoelectric Performance of Single-Walled Carbon Nanotubes by Inserting Discotic Liquid-Crystal Molecules

Durable and washable carbon nanotube-based fibers toward wearable thermoelectric generators application

Tuning thermoelectric performance with N-annulated perylene-based small molecules and single-walled carbon nanotube nanocomposite films

Synergistic effects of hybrid n-doping on the thermoelectric performance and air-stability of water-processable single-walled carbon nanotubes

Green biopolymer-CNT films exhibit high thermoelectric power factor and electrical conductivity for low temperature heat energy harvesting

Benzothienobenzothiophene‐Based Organic Charge Transfer Complex and Carbon Nanotube Composites for p‐Type and n‐Type Thermoelectric Materials and Generators

N-Type Flexible Films and a Thermoelectric Generator of Single-Walled Carbon Nanotube-Grafted Tin Selenide Nanocrystal Composites

Carbon Nanotube-Based Organic Thermoelectric Materials for Energy Harvesting

Wet-spun flexible carbon nanotubes/polyaniline fibers for wearable thermoelectric energy harvesting

Highly Stretchable Carbon Nanotubes/Polymer Thermoelectric Fibers

High-Performance thermoelectric generator based on n-Type flexible composite and its application in Self-Powered temperature sensor

Novel Hybrid p- and n-Type Organic Thermoelectric Materials Based on Mussel-Inspired Polydopamine

Wet-spun PEDOT:PSS/CNT composite fibers for wearable thermoelectric energy harvesting