Abstract:Photonic crystal (PhC) cavities have drawn plenty of attentions during the past several decades for the advantages of ultra-high Q factor and small mode volume. PhC cavities have various applications such as quantum information processing, low threshold lasers, optomechanics, and nonlinear optics. PhC cavities based on silicon material have been heavily investigated due to their compatibility with complementary metal-oxide-semiconductor (CMOS) technology, small feature size and low cost. However, apart from the advantage of high Q factor, silicon based PhC cavities suffer from the drawbacks of high insertion loss because of the mode mismatch with fiber and relatively low sensitivity especially for the sensing application. On the other hand, silicon dioxide (silica) waveguide experience relatively smaller loss and owns a similar refractive index to numerous liquid materials to be detected, which will leads to high sensitivity for a silica based PhC cavity sensor. In this paper, we propose a high Q factor (Q = 15500) silica based PhC nanobeam cavity with high sensitivity (the wavelength shift per refractive index unit (RIU) is S = 338 nm/RIU) at the telecommunication wavelength (1550 nm). Since the refractive index contrast for silica waveguide is low for the realization of the photonic bandgaps, it is essential to utilize a silica waveguide suspended in free space. The PhC nanobeam cavity is then formed by etching a series of elliptical holes, whose dimensions linearly decrease from the center to both ends, directly into the silica waveguide. For the sake of high transmission on-resonance wavelength while maintaining high Q factor, it's important to etch partly into the waveguide, which results in a low-refractive-index perturbation structure. The calculated on-resonance transmission is about 0.26. The novel proposed PhC nanobeam cavity shows a sensitivity 3 times larger than the one based on silicon counterparts and outperforms other low index-contrast PhC cavities by a higher on-resonance transmission. Such a structure can also be used in spectrally filtering system and nonlinear optics.

Silicon photonic crystal cavities at near band-edge wavelengths

Fabrication of Optical Cavities with Femtosecond Laser Pulses

High-Q and High-Order Side-Coupled Air-Mode Nanobeam Photonic Crystal Cavities in Silicon

High- Q Photonic Crystal Cavity in a Single-Mode Silicon Ridge Waveguide

Q factor limitation at short wavelength (around 300 nm) in III-nitride-on-silicon photonic crystal cavities

High-Q Weakly Modulated Nanobeam Cavity Based On A Suspended Silicon Dioxide Waveguide

An Improved Surface-Plasmonic Nanobeam Cavity for Higher Q and Smaller V

High-Q photonic crystal cavities in all-semiconductor photonic-crystal heterostructures

High-Q Antisymmetric Multimode Nanobeam Photonic Crystal Cavities in Silicon Waveguides

Silicon-based one-dimensional photonic crystal microcavity

Efficient resonance management in ultrahigh-Q one-dimensional photonic crystal nanocavities fabricated on 300 mm SOI CMOS platform

Photonic crystal cavities in silicon dioxide

Mid-infrared silicon-on-sapphire waveguide coupled photonic crystal microcavities

Silicon optical waveguides using photonic bandgap for bioparticle sensing

Compact Silicon Photonic Hybrid Ring External Cavity (Shrec)/ingasb-Algaassb Wavelength-Tunable Laser Diode Operating from 1881-1947 Nm

High-Q Photonic Crystal Nanobeam Cavities on Silicon

Tunable Ultra‐Narrow Linewidth Light Source Through Liquid Crystal‐Assisted Mini‐Bound‐States‐In‐Continuum Cavities

Photoluminescence from silicon dioxide photonic crystal cavities with embedded silicon nanocrystals

Large-scale synthesis of a silicon photonic crystal with a complete three-dimensional bandgap near 1.5 micrometres

Room temperature all-silicon photonic crystal nanocavity light emitting diode at sub-bandgap wavelengths

Design and Fabrication of Robust Hybrid Photonic Crystal Cavities