Abstract:The CoCrFeMnNi high entropy alloy thin films with crystalline (solid solution) structure or amorphous state were fabricated by magnetron sputtering process at different target powers and different substrate bias. Effects of the target power and substrate bias on the characteristics of the CoCrFeMnNi thin films such as microstructures, morphology and surface topography, as well as mechanical properties and corrosion behavior were studied. Phase prediction was calculated by using thermodynamic and kinetic criteria under various deposition conditions. The enthalpy, entropy, δ and Ω parameters, and electronegativity differences influenced the solid solution stability of thin films. These parameters led to the formation of solid solutions with crystalline or amorphous structures under specific limits, which corresponded to the practical XRD and TEM analysis results. Using a substrate bias in the deposition of CoCrFeMnNi thin film changed the amorphous structure to a crystalline (solid solution (BCC + FCC)) at higher target powers (200 and 300 W). On the other hand, the film structure was entirely amorphous at all sputtering target powers without the substrate bias. The mechanical properties, such as hardness, Young's modulus, film strength, and fracture toughness of CoCrFeMnNi thin film, can be enhanced by using the substrate bias and increasing the sputtering power. The potentiodynamic polarization test in 3.5 wt% NaCl aqueous solution indicated that the deposition of CoCrFeMnNi thin films at different sputtering powers and without substrate bias could increase the corrosion resistance of 304 stainless steel substrate. Using the substrate bias of −100 V in the fabrication of CoCrFeMnNi thin film decreased the corrosion current density and increased its polarization resistance.

Negative substrate bias induced modifications of the physical properties of DC sputter deposited nano-crystalline Mo thin films

Effect of Substrate Negative Bias on the Microstructural, Optical, Mechanical, and Laser Damage Resistance Properties of HfO2 Thin Films Grown by DC Reactive Magnetron Sputtering

High-energy sputtering to deposit conductive and adherent single Molybdenum layer for solar cell applications

Influence of Substrate Bias on Properties of TiN Films with X-ray Photoelectron Spectroscopy and Atomic Force Microscopy Studies

Passivation of Nanocrystalline Silicon Photovoltaic Materials Employing a Negative Substrate Bias.

Effect of substrate bias on nanoindentation hardness and microstructure of polycrystalline copper thin films

Effects of Negative Bias on the Structural, Topological and Tribological Properties of Amorphous Carbon Films Prepared by Magnetron Sputtering

Effect of Substrate Bias on the Structure and Properties of Multi-Element (alcrtatizr)n Coatings

Effect of sputtering power and substrate bias on microstructure, mechanical properties and corrosion behavior of CoCrFeMnNi high entropy alloy thin films deposited by magnetron sputtering method

Substrate-biasing during plasma-assisted atomic layer deposition to tailor metal-oxide thin film growth

The influence of substrate bias on the surface morphology, microstructure and mechanical behaviour of TiNiN coatings

Non-equilibrium character of resistive switching and negative differential resistance in Ga-doped Cr2O3 system

Effects of substrate bias voltage on the critical failure load of Cr-Al-N coatings

Effect of Substrate Bias on the Microstructure and Properties of Non-Equimolar (alcrsitizr)n Films with Different Cr/Zr Ratios Deposited Using Reactive Direct Current Magnetron Sputtering

Effect of substrate bias on the microstructure and mechanical and tribological properties of ZrNbTiMo refractory high entropy alloy film

Effects of Bias Voltage and Substrate Temperature on the Mechanical Properties and Oxidation Behavior of CrWSiN Films

Influence of Negative Bias Voltage on the Mechanical and Tribological Properties of MoS2/Zr Composite Films

Residual strain and electrical resistivity dependence of molybdenum films on DC plasma magnetron sputtering conditions

The characterization of ZrO2 films with different substrate bias voltages

Microstructure, Mechanical and Tribological Properties of Si and Al Co-Doped Hydrogenated Amorphous Carbon Films Deposited at Various Bias Voltages

The Effect of Applied Substrate Negative Bias Voltage on the Structure and Properties of Al-containing A-C:H Thin Films