Abstract:Vanadium dioxide is a well-known phase-change material on account of its unique changes of optical property, which has seen a great increase in its implementation for the regulation of thermal radiance. However, the fabrication of VO2 needs strict conditions for its narrow sliver in the phase diagram. In this paper, in situ preparation of VO2 films by high-power impulse magnetron sputtering is proposed, in which ionized flux density is used to direct the crystal growth. Besides, the surface structure and thermochromic behaviors of the deposited films are studied in detail. Furthermore, simulations are carried out for the sake of optimizing the thickness of VO2 films with the largest emissivity modulation ability, and the experimental result reveals that their tuning range reaches up to 0.32. It is believed that our work will find wide applications not only in fundamental material science but also in thermal radiance regulation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.0c00383?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.0c00383</a>.Details for ions fluxes density analyzation; supplementary XRD patterns and XPS analyzations of samples; the optical transmittances of films in visible and NIR regions at PO of 1.5 and 1.2%; the blackbody radiances of the atmospheric window (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00383/suppl_file/el0c00383_si_001.pdf">PDF</a>)Process of power diffusion at VO2/SiO2 (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00383/suppl_file/el0c00383_si_002.mp4">MP4</a>)IR images of VO2/SiO2 and SiO2 on the heating plate (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.0c00383/suppl_file/el0c00383_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Study of the oxidation process of crystalline powder of In 2 S 3 and thin films obtained by Dr Blade method

Oxidation of In2S3 films to synthetize In2S3(1-x)O3x thin films as a buffer layer in solar cells

Preparation of In_2S_3 Thin Films by Ultrasonic Spray Pyrolysis and the Influence of Post Rapid Thermal Process

PHOTOTHERMAL DEFLECTION ANALYSIS OF [math]-In2S3 THIN FILMS: THE EFFECT OF S/In MOLAR RATIOS

GRYSTAL GROWTH AND MICROSTRUCTURE OF FeS2 AND In2S3 COMPOSITE FILMS DURING SULFIDATION ANNEALING

Structural and optical properties of CuInS2 thin films prepared by magnetron sputtering and sulfurization heat treatment

CuInS 2 thin films obtained by solid-state sulfurization

Synthesis and characterization of In 2 S 3 : Na thin films prepared by vacuum thermal evaporation technique for photovoltaic applications

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

Research on CuInS2 Thin Films Prepared by One-step Electrodeposition

Characterization of prepared In2O3 thin films: The FT-IR, FT-Raman, UV-Visible investigation and optical analysis

Growth and properties of CuInS2 films by solid-state sulfurization

The optical properties of In2S3 films in the far-infrared spectral range

In Situ Preparation of VO 2 Films with Controlled Ionized Flux Density in HiPIMS and Their Regulation of Thermal Radiance

Antimony sulfide (Sb2S3) thin films by pulse electrodeposition: Effect of thermal treatment on structural, optical and electrical properties

Effects of Preparation Conditions on the CuInS2Films Prepared by One-Step Electrodeposition Method

Study of Sulphidation of Cu–In Nanoparticle Precursor Films with an Air-Stable Process

An in- and ex-situ TEM study into the oxidisation of titanium (IV) sulphide

Structural, Optical, Electric and Magnetic Characteristics of (In1-xGdx)2O3 Films for Optoelectronics

Preparation and Properties of CuInS2 Thin Film Deposited by Single-Source Thermal Evaporation

Biomolecule-assisted hydrothermal synthesis of In2S3 porous films and enhanced photocatalytic properties