Abstract:A strategic option for the production of H2 from renewable resources is use of the ethanol steam reforming reaction. Catalysts based on nickel have been widely investigated for this reaction, offering the advantages of low cost and high activity. However, a difficulty is that nickel may be strongly deactivated by coke formation. Perovskite-type mixed oxides are promising precursors for nickel-based catalysts, since their reduction leads to the formation of highly dispersed metal particles that can mitigate carbon deposition. However, high calcination temperatures are required for perovskite structure formation, resulting in low surface areas and limiting the effectiveness of this method. In order to address this difficulty, the present work proposes a novel strategy whereby the perovskite-type oxide LaNiO3 is supported on SBA-15. Characterization of the catalysts was performed using XRF, XRD, SEM, TPR, TEM, BET, H2-TPD, and TGA techniques. Their performances were then evaluated in catalysis of the ethanol steam reforming reaction to produce hydrogen. Calcination at 750 °C resulted in formation of highly dispersed perovskite on a support that presented high specific surface area. The catalyst obtained from reduced LaNiO3/SBA-15 with 33 wt% perovskite was the most active in the reaction. Analyses using TGA and SEM showed the formation of carbon mainly over Ni catalysts obtained from bulk LaNiO3 perovskite, while supporting LaNiO3 on SBA-15 led to lower deposition of carbon. The superior performance of this material in catalysis could be attributed to the dispersion of the perovskite on SBA-15, resulting in smaller size of the Ni metal particles formed during the reduction, compared to the catalyst derived from bulk perovskite. This promising method could be used in the production of a wide range of other catalysts.

Autothermal reforming of propane over Ni catalysts supported on a variety of perovskites

Effect of ceria on hydrogen production by auto-thermal reforming of propane over supported nickel catalysts

Catalytic CO2 Reforming of Methane over Perovskite Noble Metals

Efficient Hydrogen Production by Combined Reforming of Methane over Perovskite-Derived Promoted Ni Catalysts

Propane Steam Reforming over Catalysts Derived from Noble Metal (Ru, Rh)-Substituted LaNiO3 and La0.8Sr0.2NiO3 Perovskite Precursors

Influences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane

LaFe0.9Ni0.1O3 Perovskite Catalyst with Enhanced Activity and Coke-Resistance for Dry Reforming of Ethane

Autothermal reforming of propane for hydrogen production over Pd/CeO2/Al2O3 catalysts

Improving Coking Resistance and Catalytic Performance of Ni Catalyst from LaNiO3 Perovskite by Dispersion on SBA-15 Mesoporous Silica for Hydrogen Production by Steam Reforming of Ethanol

Au-NiO/TiO_2 Catalyst for Methanol Autothermal Reforming to Produce Hydrogen

Dry Reforming of Methane over Bimetallic Ni-Co Catalyst Prepared from La(CoxNi1-x)0.5Fe0.5O3 Perovskite Precursor: Catalytic Activity and Coking Resistance

CO2 Reforming of CH4 over Nickel and Cobalt Catalysts Prepared from La-Based Perovskite Precursors

Development of Ni-doped A-site lanthanides-based perovskite-type oxide catalysts for CO2 methanation by auto-combustion method

Highly active and stable Ni/perovskite catalysts in steam methane reforming for hydrogen production

LaMnO3-based Perovskite with In-Situ Exsolved Ni Nanoparticles: a Highly Active, Performance Stable and Coking Resistant Catalyst for CO2 Dry Reforming of CH4

Non-thermal Plasma Assisted CO2 Reforming of Propane over Ni/γ-Al2O3 Catalyst

Autothermal Reforming and Partial Oxidation of Methane in Fluidized Reactor over Highly Dispersed Ni Catalyst Prepared from Ni Complex

Effects of Noble Metals Doped on Mesoporous Laalni Mixed Oxide Catalyst and Identification of Carbon Deposit for Reforming Ch4 with Co2

Autothermal Reforming of CH4 and C3H8 to Syngas in a Fluidized-Bed Reactor

Preparation, characterization, and catalytic performance comparison of Ni/LaBO3 and Ru‐Ni/LaBO3 (B = Al, Fe) for methane steam reforming to hydrogen production

Solid solution-type Sm-Pr-O supported nickel-based catalysts for auto-thermal reforming of acetic acid: Role of Pr in solid solution