Abstract:Methane dry reforming, co-converting greenhouse gases CH4 and CO2 into chemically active syngas (H2/CO), affords a promising route for producing chemicals and fuels from carbon resources. Ni catalysts are the most active for this reaction but suffer from the dilemma of rapid deactivation caused by metal sintering at higher temperatures (>973 K) or coke accumulation at relatively lower temperatures (673–973 K). Here, we report a catalyst configuration—Ni particles (15 nm) confined by a 1–2 nm-thick multielement-oxide (MEO) layer—allows a stable operation at 873–1073 K with a stoichiometric CH4/CO2 ratio of 1.0, that is, the severe conditions for catalyst deactivation but of industrial interest for process efficiency and atomic economy. The in situ-evolved MEO layer resembles the property of high-entropy oxide, which stabilizes the Ni particles with appropriate size and high-index facets, even at 1173 K. Meanwhile, in situ TEM under near atmospheric pressure combining intelligent gravity analysis (IGA)-mass spectrometry (MS) characterizations prove that this unique structure balanced the activation of CH4 and CO2. Thus, the lifetime of the catalyst has been efficiently prolonged with nearly coke-free operations, even at 873 K, the most severe coking temperature. This high-entropy design and stabilization effect offers a facile strategy to precisely fabricate active and robust metal catalysts with wide operation temperatures for many challenging reactions.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acscatal.1c02995.Structural characterizations, in situ experiments, and the comparison of catalytic performances under MDR reactions conditions of OxNi and the reference Ni catalysts (PDF)In situ TEM observations for the OxNi catalyst carried out over ARM 300F using an insitu sample holder (MP4)In situ TEM observations for the OxNi catalyst carried out at 1173 K with the pressure of 760 mbar (MP4)In situ TEM observations for the reference Ni catalyst carried out at 1173 K with the pressure of 760 mbar in a CH4 atmosphere (MP4)This article has not yet been cited by other publications.

Coke-resistant NdFe0.7Ni0.3O3 Perovskite Catalyst with Superior Stability for Dry Reforming of Ethane

LaFe0.9Ni0.1O3 Perovskite Catalyst with Enhanced Activity and Coke-Resistance for Dry Reforming of Ethane

Effects of Fe Partial Substitution of La2nio4/Lanio3 Catalyst Precursors Prepared by Wet Impregnation Method for the Dry Reforming of Methane

Dry Reforming of Methane over Bimetallic Ni-Co Catalyst Prepared from La(CoxNi1-x)0.5Fe0.5O3 Perovskite Precursor: Catalytic Activity and Coking Resistance

Effects of Ce Substitution at the A-site of LaNi0.5Fe0.5O3 Perovskite on the Enhanced Catalytic Activity for Dry Reforming of Methane

Influences of Ni Content on the Microstructural and Catalytic Properties of Perovskite LaNixCr1−xO3 for Dry Reforming of Methane

Atypical Stability of Exsolved Ni-Fe Alloy Nanoparticles on Double Layered Perovskite for Co2 Dry Reforming of Methane

LaMnO3-based Perovskite with In-Situ Exsolved Ni Nanoparticles: a Highly Active, Performance Stable and Coking Resistant Catalyst for CO2 Dry Reforming of CH4

Dry reforming of methane by La 2 NiO 4 perovskite oxide: B-site substitution improving reactivity and stability

Ni/Ce0.9Eu0.1O1.95 with enhanced coke resistance for dry reforming of methane

Perovskite La-2(Nicu)O-4 Catalyst Precursors For Dry Reforming Of Methane: Effects Of Cu-Substitution On Carbon Resistance

The Ni Catalyst Supported on the FSP-made Transition Metal (Co, Mn, Cu or Zn) Doped La2O3 Material for the Dry Reforming of Methane

Development of Ni-doped A-site lanthanides-based perovskite-type oxide catalysts for CO2 methanation by auto-combustion method

Enhanced activity and stability of Ce-doped PrCrO3-supported nickel catalyst for dry reforming of methane

Dry Reforming of Methane on Ni-Fe-MgO Catalysts: influence of Fe on carbon-resistant property and kinetics

Effects of Noble Metals Doped on Mesoporous Laalni Mixed Oxide Catalyst and Identification of Carbon Deposit for Reforming Ch4 with Co2

Effect of Nickel and Cobalt Doping on the Redox Performance of SrFeO3−δ Toward Chemical Looping Dry Reforming of Methane

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Changes in Ni-NiO Equilibrium Due to LaFeO3 and the Effect on Dry Reforming of CH4

Stable Trimetallic NiFeCu Catalysts with High Carbon Resistance for Dry Reforming of Methane

A-site Deficient Titanate Perovskite Surface with Exsolved Nickel Nanoparticles for Ethanol Steam Reforming