Abstract:We demonstrate the laser processing for fabrication of advanced photonic devices including fiber gratings and high transmittance biomimetic windows. The fiber gratings, including fiber Bragg gratings (FBGs) and long period fiber gratings (LPFGs), are fabricated in non-sensitized standard telecom single-mode fiber by femtosecond (fs) laser, making them hightemperature (1000 ℃) stable. The FBG written by fs laser combined with phase mask method is used for monitoring the thermal effect in fs laser interaction with silica glass. The peak temperature of the thermal impulse is estimated about 4800 ℃, which decays to around 500 ℃ in the pulse interval for irradiation of 1.1 mJ at repetition rate of 1 kHz. When the pulse energy and repetition rate increase in the fabrication process of FBGs, the fs-laser-induced grating regions extend from the fiber core to the cladding?air boundary due to the laser self-focusing. With the help of selective chemical etching of the laser modified grating regions, a microhole array structured FBG is formed, which is demonstrated in the application of simultaneous sensing for refractive index (RI) and temperature. For the fs laser direct writing of LPFGs, the period is 100 μm, making the total length of the LPFG only 5 mm. The LPFGs can couple the guided mode to high-order cladding modes of second-order diffraction, resulting in a high RI sensitivity of 5265 nm/RI unit in the RI range of 1.433 ∼ 1.443 and a low-temperature sensitivity of ?15.52 pm/℃ from 20 ℃ to 500 ℃. In addition, the high transmittance biomimetic windows are produced by direct laser interference ablation. The interfered laser beams are introduced into the surface of a bare optical substrate, where structured surfaces consisting of a micropillar array are produced by the multiple exposure of the two-beam interference ablation. As an example of the application, zinc sulfide substrates are processed with this technology.

Microsphere solid state biolasers

Protein-based microsphere biolasers fabricated by dehydration

Biomaterial Microlasers Implantable in the Cornea, Skin, and Blood

Femtosecond Laser Processing of Microcavity Lasers

Real 3D microsphere lasers by femtosecond laser processing

Biomineral Amorphous Lasers through Light-Scattering Surfaces Assembled by Electrospun Fiber Templates

Biotinylated Photocleavable Semiconductor Colloidal Quantum Dot Supraparticle Microlaser

Protein-Based Three-Dimensional Whispering-Gallery-Mode Micro-Lasers with Stimulus-Responsiveness

Smart Protein-Based Biolasers: An Alternative Way to Protein Conformation Detection

Bismuth-doped glass microsphere lasers

Monitoring Various Bioactivities at the Molecular, Cellular, Tissue, and Organism Levels Via Biological Lasers.

Microlasers Enabled by Soft‐Matter Technology

Solid State Dye Lasers Based on LDS 698 Doped in Modified Polymethyl Methacrylate

Lasing Micro-Robots: Manipulation of Active Laser Sources in Biological Fluids

Fabrication of Embedded Microball Lens in PMMA with High Repetition Rate Femtosecond Fiber Laser.

Laser-processing of Transparent Solid Materials for Advanced Photonic Device Applications

Bismuth Quantum Dots As an Optical Saturable Absorber for a 13 Μm Q-switched Solid-State Laser

Light-driven liquid metal nanotransformers for biomedical theranostics

Bismuth-Doped Compound Germanate Glass Microsphere Lasing In The Near-Infrared Region

Dense-Wavelength-Division Laser Micro-Particles: Fabrication and Imaging in Tissues

Bismuthene Quantum Dots Based Optical Modulator for MIR Lasers at 2 Μm