Abstract:When Chen et al. (2015, Acta Mater. 87, 78-85) investigated the deformation behavior of oligocrystalline gold microwires with varying diameters in both uniaxial tension and torsion, contrary size effects were observed for the different load cases. In accompanying microstructural studies it was found, that the microwires of different thickness reveal distinctive differences in grain size and texture, respectively. As a consequence, a significant influence of these microstructural variations on the determined size effects was assumed. However, within the frame of their work, a direct confirmation could only be presented for the effect of the grain size. In the present work, the size-dependent mechanical response of the microwires is modeled with a gradient plasticity theory. By finite element simulations of simplified grain aggregates, the influence of the texture on the size effects is investigated under both loading conditions. It is shown that the experimentally observed contrary size effects can only be reproduced when taking into account the individual textures of the microwires of different thickness within the modeling.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is the opposite size effects observed under tensile and torsional loading in polycrystalline gold microwires of different diameters. Specifically, in a 2015 study by Chen et al., it was found that when uniaxial tensile and torsional experiments were carried out on polycrystalline gold microwires of different diameters, different size effects were observed. In these experiments, the microstructure of the microwires (such as grain size and texture) showed significant differences, which were considered to have an important impact on the determined size effects. However, the study by Chen et al. only directly confirmed the influence of grain size. Therefore, the main objective of this paper is to explore the influence of texture on size effects under different loading conditions through gradient plasticity theory modeling combined with finite - element simulation. The author hopes to verify through the model whether the opposite size effects observed in the experiment can be reproduced by considering the individual textures of microwires of different thicknesses. ### Main problems 1. **Influence of size effects on different loading conditions**: - Under tensile loading, the size effect is manifested as an increase in material strength as the diameter decreases. - Under torsional loading, the size effect is manifested as a decrease in material strength as the diameter decreases. 2. **Influence of microstructure**: - Specific influence of grain size and texture on size effects. - In particular, the role of texture under different loading conditions. ### Research methods - **Gradient plasticity theory**: Introduce an internal length scale and consider the resistance of grain boundaries to dislocation movement. - **Finite - element simulation**: Use a simplified grain aggregate for simulation to explore the influence of texture on size effects. - **Comparison of experimental data**: Compare the simulation results with experimental data to verify the validity of the model. ### Key assumptions - The microwires are composed of ideally ⟨100⟩ - and ⟨111⟩ - oriented grains. - Consider the resistance of grain boundaries to dislocation movement and describe it through a gradient stress term. - Adjust the model parameters to make the simulation results consistent with the experimental data. ### Expected results - By considering the individual textures of microwires of different diameters, it is possible to reproduce the opposite size effects observed in the experiment. - Verify the specific contributions of grain size and texture to size effects. In summary, this paper aims to gain an in - depth understanding of the size effects of polycrystalline gold microwires under different loading conditions through gradient plasticity theory and finite - element simulation, and to explore the role of microstructure (especially texture) therein.

Modeling contrary size effects of tensile- and torsion-loaded oligocrystalline gold microwires

In Situ TEM Study on the Nanomechanical Behaviors of Metallic Nanowires

Modeling Grain Size Dependent Optimal Twin Spacing for Achieving Ultimate High Strength and Related High Ductility in Nanotwinned Metals

Achieving High Strength and High Ductility in Nanostructured Metals: Experiment and Modelling

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments

Structural, Magnetic and Mechanical Properties of Oligocrystalline Ni-Mn-Ga Shape Memory Microwires

Size Effect in Stainless Steel Thin Wires under Tension

In situ TEM study of microplasticity and Bauschinger effect in nanocrystalline metals

In Situ Micromechanical Characterization of Metallic Glass Microwires under Torsional Loading

Anomalous Plasticity in the Cyclic Torsion of Micron Scale Metallic Wires.

Effect of Size on Fracture and Tensile Manipulation of Gold Nanowires

Crystal plasticity modelling of multi-stage deformation of ultra-thin sheets considering grain size effect and strain path change

Incremental strain gradient plasticity model and torsion simulation of copper micro-wires

Unraveling size-affected plastic heterogeneity and asymmetry during micro-scaled deformation of CP-Ti by non-local crystal plasticity modeling

Effects of texture and twinning on the torsional behavior of magnesium alloy solid rod: A crystal plasticity approach in comparison with uniaxial tension/compression

Tensile Manipulation of Ultrathin Gold Nanowires at Different Sizes and Atomic Vacancies

Microstructures of Constrained Shape Memory Alloy Nanowires under Thermal Effects

Size Effects on Tensile and Compressive Strengths in Metallic Glass Nanowires

A stochastic crystal plasticity model with size-dependent and intermittent strain bursts characteristics at micron scale

Simulated Microstructure Effects on Macroscopic Mechanical Properties Based on Multiscale Crystal Plasticity