Abstract:The temperature-sensitive paint (TSP) method, an optical measurement technique, is used for qualitative skin friction visualizations in a wide variety of aerodynamic applications. One such application is the visualization of the laminar-turbulent boundary-layer transition. Optical access to the surface of interest is mandatory for the measurement system, which consists of scientific cameras and LEDs. But the optical access to the area of interest is often impeded by the available windows of the wind tunnel and the wind tunnel model itself, reducing the field of view and the spatial resolution. In some cases, it is of interest to increase the flexibility of the installation of the optical measurement system by reducing its physical dimensions and placing the installation inside the plenum. The DLR Swept flat PlatE Cross-flow TRAnsition (SPECTRA-A) configuration was selected to investigate the influence of two-dimensional steps on the cross-flow-induced boundary layer transition by means of TSP, as part of the EU project Clean Sky 2. The SPECTRA-A configuration consists of two main elements: a flat plate and a displacement body mounted within a very close distance of each other, creating a narrow gap between the two elements. The surface of interest is the area on the flat plate facing the displacement body. The narrow gap limits the utilization of an external camera setup due to poor optical access. A new optical setup consisting of four miniature CMOS machine-vision cameras and five miniature high-power LEDs was integrated into the displacement body. The characteristics of the camera system were analyzed in laboratory tests, establishing that the miniature CMOS machine-vision cameras are suitable for qualitative TSP skin friction visualizations. This was confirmed by successfully measuring the laminar-turbulent boundary-layer transition on the SPECTRA-A configuration. The integrated TSP system is capable of resolving even small variations of the transition location caused by changing the amplitude of the stationary cross-flow instability. The quality of the TSP visualization with the integrated optical system allows for the measurement of the transition location and the wavelength of the stationary cross-flow instability. Overall, a cost-effective TSP visualization system with small space requirements was developed and tested for future applications in wind tunnel models, model support, or side walls of wind tunnels.

Riblet Sensor -- Light Scattering on Micro Structured Surface Coatings

Study of Negative Side Wall Surface Roughness by Picosecond Photonic Impact Microdeposition

Non-Contact Surface Roughness Measurement by Implementation of a Spatial Light Modulator

Comparison of Optical and Stylus Methods for Surface Texture Characterisation in Industrial Quality Assurance of Post-Processed Laser Metal Additive Ti-6Al-4V

Laser-induced damage and contamination testing for the next generation of LIDAR space optics

Study for Laser Controlled Fabrication of Micro/Nano-Structures of Silicon Based on Multi-Physics Model

Femtosecond Laser-Induced Evolution of Surface Micro-Structure in Depth Direction of Nickel-Based Alloy

Laser Scanning Microscopy for Tomographic Imaging of Roughness and Point Absorbers in Optical Surfaces

Application of a Laser Profile Sensor for the Full-Field Measurement of the Continuous Icing Process of Rotating Blades

Increase of process reliability in the micro-machining processes EDM-milling and laser ablation using on-machine sensors

A method for crack sizing using Laser Doppler Vibrometer measurements of Surface Acoustic Waves

Femtosecond Laser Texturing of Surfaces for Tribological Applications

Optical surface absolute specular reflectance measurement using an infrared etalon and interferometer combination method

Measurement of the effects of rough surfaces on Lamb waves propagation

Creation of Material Functions by Nanostructuring

Interface Debonding Monitoring of Solid Rocket Motor Based on Femtosecond Grating Array.

Fundamentals of Scanning Surface Structuring by Ultrashort Laser Pulses: From Electron Diffusion to Final Morphology

Miniaturization and Model-Integration of the Optical Measurement System for Temperature-Sensitive Paint Investigations

Quantitative Evaluation of Subsurface Damage by Improved Total Internal Reflection Microscopy

A Microfluidic Sensor for Dynamic Surface Tension Measurement

Online Measurement Of Deposit Surface In Electron Beam Freeform Fabrication