Abstract:In situ measurements are highly desirable in many microfluidic applications because they enable real-time, local monitoring of physical and chemical parameters, providing valuable insight into microscopic events and processes that occur in microfluidic devices. Unfortunately, the manufacturing of microfluidic devices with integrated sensors can be time-consuming, expensive, and "know-how" demanding. In this article, we describe an easy-to-implement method developed to integrate various "off-the-shelf" fiber optic sensors within microfluidic devices. To demonstrate this, we used commercial pH and pressure sensors ("pH SensorPlugs" and "FOP-MIV", respectively), which were "reversibly" attached to a glass microfluidic device using custom 3D-printed connectors. The microfluidic device, which serves here as a demonstrator, incorporates a uniform porous structure and was manufactured using a picosecond pulsed laser. The sensors were attached to the inlet and outlet channels of the microfluidic pattern to perform simple experiments, the aim of which was to evaluate the performance of both the connectors and the sensors in a practical microfluidic environment. The bespoke connectors ensured robust and watertight connection, allowing the sensors to be safely disconnected if necessary, without damaging the microfluidic device. The pH SensorPlugs were tested with a pH 7.01 buffer solution. They measured the correct pH values with an accuracy of ±0.05 pH once sufficient contact between the injected fluid and the measuring element (optode) was established. In turn, the FOP-MIV sensors were used to measure local pressure in the inlet and outlet channels during injection and the steady flow of deionized water at different rates. These sensors were calibrated up to 140 mbar and provided pressure measurements with an uncertainty that was less than ±1.5 mbar. Readouts at a rate of 4 Hz allowed us to observe dynamic pressure changes in the device during the displacement of air by water. In the case of steady flow of water, the pressure difference between the two measuring points increased linearly with increasing flow rate, complying with Darcy's law for incompressible fluids. These data can be used to determine the permeability of the porous structure within the device.

A Microfluidic Sensor for Dynamic Surface Tension Measurement

Optical Micro/nanofibre Embedded Soft Film Enables Multifunctional Flow Sensing in Microfluidic Chips

Microfluidic Chip Based Microfiber/nanofiber Sensors

Ultra-Sensitive Nanofiber Fluorescence Detection In A Microfluidic Chip

Micromachined SiO 2 microcantilever for high sensitive moisture sensor

A Microfluid Fiber Device for Trace Detection of Aggregation Induced Emission Molecules

Dry-Mass Sensing for Microfluidics

A Microfluidic Chip Capable of Switching W/O Droplets to Vertical Laminar Flow for Electrochemical Detection of Droplet Contents.

A Novel Microfluidic Method to Simultaneously Measure Droplet Size and Interfacial Tension Without Visualization

Janus Flexible Device with Microcone Channels for Sampling and Analysis of Biological Microfluidics

Polymer Mems-Based Fabry-Perot Shear Stress Sensor

A Novel Microfluidics Droplet-Based Interdigitated Ring-Shaped Electrode Sensor for Lab-on-a-Chip Applications

An ultrahigh frequency dielectric sensor for microdroplet detection using a split ring resonator-based microfluidic chip

Microfluidic Chip with Fiber-Tip Sensors for Synchronously Monitoring Concentration and Temperature of Glucose Solutions

Droplet deformation in steady fluidic flows enables robust, accessible, high-throughput surface tension measurements

Micro‐Droplets Parameters Monitoring in a Microfluidic Chip via Liquid‐Solid Triboelectric Nanogenerator

Manufacturing of Microfluidic Devices with Interchangeable Commercial Fiber Optic Sensors

Silicon photonic sensors incorporated in a digital microfluidic system

A chip-integrated optical microfluidic pressure sensor

Bioadhesive Hydrogel Flexible Laser for Sweat Sensing based on Liquid Crystal Microdroplets

Four-wave Mixing-Based Photonic Crystal Fiber Microfluid Sensor with Embedded U-shape Microslits