Abstract:High intensity nanosecond laser pulses induce damage on uncoated optics and antireflection (AR) coated optics with thin film boundaries. Structured surfaces with AR performance have shown higher damage resistance than conventional AR coatings. This work explores laser-induced damage threshold (LIDT) of random antireflective surface structures (rARSS), covering interfaces of planar fused silica substrates, using a 7 ± 1 nanosecond duration, single damaging pulse at 1064-nm wavelength. The rARSS treated windows were optimized for AR at 1064 nm, and transmittance of each treated interface was increased by 3.2% per ISO 13697. Incident fluence was controlled near LIDT for both entry and exit sides. Multiple locations were tested for each fluence setting in accordance with ISO 21254 1-on-1 LIDT testing. Double-sided and single-sided rARSS, orientation with both entrance-side and exit-side treatments, were tested to determine effects random structures have in damage induced by field enhancement on the exit side. Results show that rARSS on a single side of an optic have higher resistance to onset of laser damage when located at entry (structured) side. All tests resulting in damage of polished and single-sided rARSS oriented on exit side were ballistic on beam exit facet, showing surface cracks. Results from rARSS located on beam entry side (both single- and double-side treated) showed nonballistic damage and densification of rARSS features from localized melting or reflow, capping the rARSS but still preserving effective-gradient index and rARSS transmission enhancement. This suggests that the localized melting of the rARSS optic surface does not constitute damage optically, or at least not catastrophically within the prebulk damage regime. Therefore, it is possible to foresee the onset of true damage within an optical system via tracking transmission drop, and swap optics out before catastrophic system failure. The drop in transmission acts as an early warning system, making these rARSS optics an invaluable tool in high-energy laser development.

Laser-induced damage and contamination testing for the next generation of LIDAR space optics

Researches on Laser Damage Resistance of Optical Films

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Tests for contamination enhanced and laser-induced damage in spaceborne lidar system and its prevention

Non-destructive testing of subsurface damage for early indication of laser-induced damage threshold in fused silica

Laser-induced molecular contamination de-risking activity for the Laser Interferometer Space Antenna

Laser Induced Damage of Optical Elements–a Status Report

An accurate, repeatable, and well characterized measurement of laser damage density of optical materials

Non-destructive evaluation of UV pulse laser-induced damage performance of fused silica optics

Laser damage of silica optical windows with random antireflective structured surfaces

Direct Testing against Experiment of a Fundamental Ultrashort Pulse Laser Damage Simulation Technique with Utility for the Modeling of Nanostructure Formation

Development of Integrated Multi-Station System to Precisely Detect and Mitigate Surface Damage on Fused Silica Optics

Space radiation testing and thermal cycling of functionally coated Alexandrite laser crystals

Laser-Induced Damage Initiation and Growth of Optical Materials

Effect of residual impurities on the behavior and laser-induced damage of oxide coatings exposed to deep space radiation

Analysis and Experimental Investigation of Laser Induced Damage of Optics

Study of micron-scale defects in optical coatings for high-power lasers deposited by ion beam sputtering

Quantitative Evaluation of Subsurface Damage by Improved Total Internal Reflection Microscopy

Damage threshold measurements on EUV optics using focused radiation from a table-top laser produced plasma source

Laser damage of optical windows with random antireflective surface structures on both interfaces

Confocal laser scanning and 3D reconstruction methods for the subsurface damage of polished optics