Temperature control of battery modules through composite phase change materials with dual operating temperature regions

Guohua Ye,Guoqing Zhang,Liqin Jiang,Xiaoqing Yang

DOI: https://doi.org/10.1016/j.cej.2022.137733

IF: 15.1

2022-07-06

Chemical Engineering Journal

Abstract:The phase change material (PCM)-based battery thermal management technology still remains a contradiction of guaranteeing a suitable operating temperature (20–40 °C) of the batteries under regular working conditions, while avoiding the malfunction of the PCM under high ambient temperature (>40 °C). Therefore, a novel composite PCM (CPCM) possessing dual phase change temperature regions (PCTRs) is designed herein by in-situ constructing a phase-changeable polymer (PCP) framework in the polyethylene glycol (PEG)/expanded graphite (EG) slurry. As prepared, the lower PCTR at 31.7–42.1 °C from the PCP framework provides a latent heat of 35.0 J g −1 , while the higher PCTR at 42.1–51.2 °C from the PEG offers a latent heat of 68.3 J g −1 . Additionally, the nanoscaled PCP framework strongly adsorbs the PEG, preventing the leakage phenomenon (mass loss < 1%), and the uniformly dispersed EG endows the CPCM with a high thermal conductivity of 1.98 W m −1 K −1 . In consequence, under the normal ambient temperature of 25 °C, the lower PCTR effectively keeps the battery module operating within the suitable temperature range of 25.9–34.9 °C and with a low temperature difference (ΔT) of 2.4 °C at the discharge rate of 1C. For comparison, the battery module adopting classical CPCM with a single PCTR at 40.9–55.1 °C demonstrates a much higher temperature range and maximum ΔT at 28.0–40.9 °C and 4.8 °C, respectively. Under the high ambient temperature of 40 °C, the higher PCTR starts to work like the single PCTR of traditional CPCMs, and controls the T max and ΔT of the module below 49.2 and 2.2 °C at the discharge rate of 1C, respectively, preventing thermal hazards.

engineering, chemical, environmental