Abstract:The development of phase change material (PCM) for battery thermal management poses key limitations on its reliability caused by leakage and shape deformation under high temperature. In this work, a kind of phase changeable and hydrophobic polymer skeleton is grown in situ in a paraffin (PA)/expanded graphite matrix to obtain the leakage-proof composite PCM (CPCM) at the kilogram-level. Benefiting from the additional latent heat provided by the phase changeable alkyl side chains of the polymer skeleton, the obtained CPCM shows a high latent heat of 120.3 J g–1 coupled with a thermal conductivity of 2.92 W m–1 K–1. Most importantly, the three-dimensional cross-linking main chain and the hydrophobic alkyl side chains endow the obtained CPCM with extraordinary shape stability under high temperatures up to 250 °C and high PA adsorbing capability, respectively. As a consequence, the CPCM presents excellent antileakage performance for the battery module (21 V/16 Ah) under harsh working conditions, i.e., 50 charge–discharge cycles at 3C–4C, thus giving rise to a durable cooling performance. The maximum temperature (Tmax) and temperature difference (ΔTmax) of the battery module can be controlled constant at 50.9 and 5.0 °C during the cycles, respectively. By stark contrast, owing to the obvious leakage phenomenon, the battery module with traditional CPCM adopting a classical low-density polyethylene skeleton shows increasing Tmax and ΔTmax during the cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00235?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00235</a>.Details of charge–discharge parameters; comparison of the latent heat; cyclic stability of the ΔHm, Tmax, and ΔTmax of the battery module upon cycling; preparation procedures of CPCM; schematic diagram of the battery module; DSC curves of OA, PA, LDPE, and CPCM; and current and voltage trace (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00235/suppl_file/ae1c00235_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Multifunctional flexible composite phase change material with high anti-leakage and thermal conductivity performances for battery thermal management

Flexible Solid-Solid Phase Change Material with Zero Leakage Via In-Situ Preparation for Battery Thermal Management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Experimental study on novel composite phase change materials with room-temperature flexibility and high-temperature shape stability in a battery thermal management system

A novel stable and flexible composite phase change materials for battery thermal management

Ultrareliable Composite Phase Change Material for Battery Thermal Management Derived from a Rationally Designed Phase Changeable and Hydrophobic Polymer Skeleton

Highly Thermal Conductive and Antileakage Composite Phase Change Materials Based on 3d Metal-Organic Networks for Battery Thermal Management

Experimental investigation on thermally induced aluminum nitride based flexible composite phase change material for battery thermal management

High thermal conductive and anti-leakage composite phase change material with halloysite nanotube for battery thermal management system

Pouch Lithium Battery with a Passive Thermal Management System Using Form-Stable and Flexible Composite Phase Change Materials

Investigation on the Thermal Contact Resistance Mechanism of a Composite Phase Change Material for Battery Thermal Management

Introducing a Flexible Insulation Network to the Expanded Graphite-Based Composite Phase Change Material to Enhance Dielectric and Mechanical Properties for Battery Thermal Management

An innovative battery thermal management with thermally induced flexible phase change material

High thermal conductivity composite phase change material with nano-Ag particles modified diatomite and expanded graphite for improving battery thermal management efficiency

A Novel Flexible Composite Phase Change Material with Enhanced Toughness and Shape Stability for Battery Thermal Management

A Thermally Induced Flexible Composite Phase Change Material with Boron Nitride Nanosheets/carbon Nanotubes Modified Skeleton for Battery Thermal Management

High Antileakage and Thermal Conductivity Composite Phase-Change Material with Anisotropy Expanded Graphite for Battery Thermal Management

Flexible composite phase change material with anti-leakage and anti-vibration properties for battery thermal management

Design of the FLame Retardant Form-Stable Composite Phase Change Materials for Battery Thermal Management System