Abstract:With the rapid development of electric vehicles, lithium-ion battery has been widely used as an energy source. However, to avoid thermal runaway and to ensure the correct operation of lithium-ion battery system, effective battery thermal management would be required. In this study the capacity of phase change materials with different thermal-physical properties to respectively manage thermal issues associated with lithium-ion battery is theoretically investigated using computational fluid dynamics. The impacts of shell material, heat transfer coefficient, phase change material fill volume and the shape of the battery pack on the thermal performance of the lithium-ion battery/phase change material system are investigated in detail. The results show that when the ambient temperature was 20 °C or 30 °C, phase change material-RT35 shows the best temperature control ability for the proposed system, while the phase change material-RT50 has better thermal management capability when the ambient temperature is 40 °C. Also, higher heat transfer coefficient or shell material with higher thermal conductivity, effectively reduce the maximum temperature of the lithium-ion battery and the temperature difference within the proposed system. Specifically, the phase transition time in the lithium-ion battery/phase change material system with a heat transfer coefficient of 10 W/m 2 K is more than twice longer compared to that of 1 W/m 2 K and the maximum temperature is 47.18 °C after 150 min of charging and discharging. It is also observed that the phase change material with larger volume ratio leads to lower system temperature during phase transition and the continuous charging and discharging after completing transformation of the phase change material impacts negatively on the thermal management of the lithium-ion battery system. Besides, the rectangular lithium-ion battery/phase change material system surpasses the circular one by 14.78 °C in maximum temperature, while attaining a minimum temperature difference of 9.6 °C after 150 min of charging and discharging.

Flexible composite phase change material with anti-leakage and anti-vibration properties for battery thermal management

Investigation on the Thermal Contact Resistance Mechanism of a Composite Phase Change Material for Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

Multifunctional flexible composite phase change material with high anti-leakage and thermal conductivity performances for battery thermal management

High thermal conductive and anti-leakage composite phase change material with halloysite nanotube for battery thermal management system

A novel elastomeric copolymer-based phase change material with thermally induced flexible and shape-stable performance for prismatic battery module

A novel stable and flexible composite phase change materials for battery thermal management

EG@Bi-MOF derived porous carbon/lauric acid composite phase change materials for thermal management of batteries

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

An electric conductive wide-temperature flexible phase change material for all-climate battery thermal management

Pouch Lithium Battery with a Passive Thermal Management System Using Form-Stable and Flexible Composite Phase Change Materials

Experimental and numerical investigation of a battery thermal management system using a novel EVA-based thermal-induced flexible composite phase change material

An innovative battery thermal management with thermally induced flexible phase change material

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Low-cost and highly thermally conductive lauric acid–paraffin–expanded graphite multifunctional composite phase change materials for quenching thermal runaway of lithium-ion battery

High Antileakage and Thermal Conductivity Composite Phase-Change Material with Anisotropy Expanded Graphite for Battery Thermal Management

Investigation of the thermal management potential of phase change material for lithium-ion battery

Experimental investigation on a novel phase change material composites coupled with graphite film used for thermal management of lithium-ion batteries

A Novel Room-Temperature Flexible Phase Change Material for Solar Energy Photothermal Conversion and Battery Thermal Management

Experimental design of paraffin/methylated melamine-formaldehyde microencapsulated composite phase change material and the application in battery thermal management system