Abstract:To improve the heat dissipation efficiency of batteries, the eutectic mass ratios of each component in the ternary low-melting phase change material (PCM), consisting of stearic acid (SA), palmitic acid (PA), and lauric acid (LA), was explored in this study. Subsequently, based on the principle of high thermal conductivity and low leakage, SA–PA–LA/expanded graphite (EG)/carbon fiber (CF) composite phase change material (CPCM) was prepared. A novel double-layer CPCM, with different melting points, was designed for the battery-temperature control test. Lastly, the thermal management performance of non-CPCM, single-layer CPCM, and double-layer CPCM was compared via multi-condition charge and discharge experiments. When the mass ratio of SA to PA is close to 8:2, better eutectic state is achieved, whereas the eutectic mass ratio of the components of SA–PA–LA in ternary PCM is 29.6:7.4:63. SA–PA–LA/EG/CF CPCM formed by physical adsorption has better mechanical properties, thermal stability, and faster heat storage and heat release rate than PCM. When the CF content in SA–PA–LA/EG/CF CPCM is 5%, and the mass ratio of SA–PA–LA to EG is 91:9, the resulting SA–PA–LA/EG/CF CPCM has lower leakage rate and better thermal conductivity. The temperature control effect of single-layer paraffin wax (PW)/EG/CF CPCM is evident when compared to the no-CPCM condition. However, the double-layer CPCM (PW/EG/CF and SA–PA–LA/EG/CF CPCM) can further reduce the temperature rise of the battery, effectively control the temperature and temperature difference, and primarily maintain the battery in a lower temperature range during usage. After adding an aluminum honeycomb to the double-layer CPCM, the double-layer CPCM exhibited better thermal conductivity and mechanical properties. Moreover, the structure showed better battery temperature control performance, while meeting the temperature control requirements during the charging and discharging cycles of the battery.

Experimental Study of Temperature Control Based on Composite Phase Change Materials during Charging and Discharging of Battery

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Temperature control of battery modules through composite phase change materials with dual operating temperature regions

Experimental Study of a Passive Thermal Management System Using Expanded Graphite/Polyethylene Glycol Composite for Lithium-Ion Batteries

Preparation of SA–PA–LA/EG/CF CPCM and Its Application in Battery Thermal Management

An innovative battery thermal management with thermally induced flexible phase change material

A phase change material with enhanced thermal conductivity and secondary heat dissipation capability by introducing a binary thermal conductive skeleton for battery thermal management

Battery Thermal Management Using Phase Change Material-Metal Foam Composite Materials at Various Environmental Temperatures

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Experimental studies and comprehensive computational investigations on composites-based phase change material for battery thermal management systems in electric vehicles

An experimental study on the thermal performance of mixed phase change materials-based battery cooling system

Experimental and numerical investigation of a battery thermal management system using a novel EVA-based thermal-induced flexible composite phase change material

Paraffin/graphite/boron nitride composite as a novel phase change material for rapid heat absorption in battery thermal management technology

Experimental Study on the Application of Phase Change Material in the Dynamic Cycling of Battery Pack System

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material

Research on novel battery thermal management system coupling with shape memory PCM and molecular dynamics analysis

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review

A novel stable and flexible composite phase change materials for battery thermal management