Abstract:Battery thermal management system (BTMS) is highly essential to maintain battery temperature in Electric Vehicles. The phase change material (PCM) based BTMS is highly effective due to its high latent heat and can also be used without any power consumption. The present work aims to propose the most suitable PCM used for BTMS. Six commercially available PCMs are studied with the battery pack at three different charging rates low (1C), moderate (2C), and high (3C), and three different ambient conditions, i.e., cold (20 °C), moderate (30 °C), and hot (40 °C) conditions. As critical thermal parameters, the maximum battery temperature (Tmax ) and maximum temperature difference (ΔTmax ) are studied. As both Tmax and ΔTmax are required to be minimum to increase the performance of the battery, a method of Multi-attribute decision making (MADM) named Weighted Product Method (WPM) is used in the present study. At different charging rates 1C, 2C, and 3C, PCMs RT31, RT35, and RT42 are found as most suitable, respectively. While, RT24, RT35, and RT50 are found as most suitable PCM at the ambient temperature of 20 °C, 30 °C, and 40 °C, respectively. It is found out from the result that ambient temperature should be given more consideration than charging rate in PCM selection. These PCMs are found suitable on a battery performance basis; however, if a safe range of lithium-ion batteries (60 °C) is considered, it is noticed that only RT42 and RT50 successfully maintain battery temperature below 60 °C at each operating condition. Finally, it is concluded that PCM with melting temperature lower than ambient temperature and quite higher than ambient temperature is not effective, but PCM with melting temperature 5–10 °C more than ambient temperature can provide better battery performance.

An experimental study on the thermal performance of mixed phase change materials-based battery cooling system

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Enhancing Thermal Performance and Cooling Solutions of Phase Change Material in Battery Thermal Management System: A Computational Analysis

Experimental study on the thermal management performance of phase change material module for the large format prismatic lithium-ion battery

Experimental Study on the Application of Phase Change Material in the Dynamic Cycling of Battery Pack System

Phase change material selection using simulation-oriented optimization to improve the thermal performance of lithium-ion battery

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

Numerical simulation of hybrid battery thermal management system combining of thermoelectric cooler and phase change material

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review

Experimental Study of Temperature Control Based on Composite Phase Change Materials during Charging and Discharging of Battery

Thermal performance enhancement with snowflake fins and liquid cooling in PCM-based battery thermal management system at high ambient temperature and high discharge rate

Recent Progresses of Battery Thermal Management Systems Based on Phase Change Materials

Study of a novel thermal management system using double-layer liquid-cooled plate-coupled PCM under high-rate discharge

Investigation of multifactorial effects on the thermal performance of battery pack inserted with multi-layer phase change materials

Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system

Temperature control of battery modules through composite phase change materials with dual operating temperature regions

Experimental and numerical study on the cooling performance of heat pipe assisted composite phase change material-based battery thermal management system

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Experimental and numerical simulation investigation on the battery thermal management performance using silicone coupled with phase change material