Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

Experimental and numerical simulation investigation on the battery thermal management performance using silicone coupled with phase change material

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Experimental investigation of the thermal performance of heat pipe assisted phase change material for battery thermal management system

Experimental and Numerical Investigations of a Thermal Management System Using Phase-Change Materials and Forced-Air Cooling for High-Power Li-Ion Battery Packs

Experimental and numerical investigation of a battery thermal management system using a novel EVA-based thermal-induced flexible composite phase change material

An experimental study on the thermal performance of mixed phase change materials-based battery cooling system

Experimental study on the thermal management performance of phase change material module for the large format prismatic lithium-ion battery

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

Optimization of heat transfer and temperature control of battery thermal management system based on composite phase change materials

An innovative battery thermal management with thermally induced flexible phase change material

A novel thermal management system combining phase change material with wavy cold plate for lithium-ion battery pack under high ambient temperature and rapid discharging

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Thermal management of lithium-ion batteries based on the coupling of liquid cooling and composite phase change materials

Parameter optimization and sensitivity analysis of a Lithium-ion battery thermal management system integrated with composite phase change material

Research on the performance failure of phase change materials thermal management for lithium battery

Numerical Optimization for a Phase Change Material Based Lithium-Ion Battery Thermal Management System

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method

Experimental investigation on room-temperature flexible composite phase change materials in thermal management of power battery pack