Abstract:Phase change material (PCM) has recently been regarded as a promising thermal management means for lithium-ion (Li-ion) batteries. However, solid-liquid phase change of many current PCMs occurs in a narrow temperature range, and the cooling performance of their liquid phase is rather poor. To tackle these issues, this article presents a battery thermal management (BTM) design which injects PCM into an aluminum shell around each cell, and machines the shell inner surfaces into a row of straight rectangular fins immersed into the PCM and its outer surfaces into a plain-fin shape exposed in the air. In the mild thermal conditions, the finned shells of two adjacent cells can be embedded and passive PCM cooling is employed. Once the PCM completely melts, the shells will move apart and an airflow will be driven through the gap between them. The BTM design can also protect Li-ion batteries in a freezing environment, by taking advantage of PCM solidification when the finned shells return to their embedded configuration. A series of experiments were conducted to examine its effectiveness on two 50Ah lithium nickel cobalt manganese oxide (NCM) prismatic batteries, which were discharged at a capacity-rate of 2C and at room temperatures of T0=25∘C , 40∘C and −10∘C . It is shown that in the battery discharge at T0=25∘C , PCM in the embedded finned shells effectively reduced the average battery-surface temperature ( T ̄ ) and the maximum temperature difference ( ΔTmax ) by 21% and 36.7% , respectively, compared to bare batteries. At T0=40∘C , this BTM design successfully limited the growth of T ̄ to 9.0∘C and led to ΔTmax no more than 1.5∘C . As to the low-temperature scenario, it maintained the batteries at temperatures above T0 for 55.2% longer than those without any BTM protections. Its cooling performance was also compared with that of the conventional liquid-cooling scheme using a bottom serpentine-channel cooling plate. All these results clearly demonstrate that the BTM design in this article can compensate for the deficiencies of conventional PCM-based BTM schemes. Regardless of whether the PCM phase change is available, it has well coped with different thermal management demands of Li-ion batteries.

A novel thermal management system combining phase change material with wavy cold plate for lithium-ion battery pack under high ambient temperature and rapid discharging

Study of a novel thermal management system using double-layer liquid-cooled plate-coupled PCM under high-rate discharge

Performance of a Combined Battery Thermal Management System with Dual-Layer Phase Change Materials and Air Cooling Technologies

Thermal management characteristics of a novel cylindrical lithium-ion battery module using liquid cooling, phase change materials, and heat pipes

Numerical analysis of lithium-ion battery thermal management system using phase change material assisted by liquid cooling method

Design and performance of a compact lightweight hybrid thermal management system using phase change material and liquid cooling with a honeycomb-like structure for prismatic lithium-ion batteries

Experimental and numerical study of lithium-ion battery thermal management system using composite phase change material and liquid cooling

A thermal management design using phase change material in embedded finned shells for lithium-ion batteries

A novel thermal management system for EV batteries using phase-change material

A hybrid battery thermal management system coupling with PCM and optimized thermoelectric cooling for high-rate discharge condition

Performance improvement of a thermal management system for Lithium-ion power battery pack by the combination of phase change material and heat pipe

Thermal performance of a hybrid cooling plate integrated with microchannels and PCM

Novel concept design of low energy hybrid battery thermal management system using PCM and multistage Tesla valve liquid cooling

Thermal performance enhancement with snowflake fins and liquid cooling in PCM-based battery thermal management system at high ambient temperature and high discharge rate

Investigations of Lithium-Ion Battery Thermal Management System with Hybrid PCM/Liquid Cooling Plate

Thermal uniformity analysis of a hybrid battery pack using integrated phase change material, metal foam, and counterflow minichannels

Numerical Simulations on Hybrid Thermal Management of Mini-Channel Cold Plate and Pcm for Lithium-Ion Batteries

Thermal Conductivity Enhancement and Thermal Saturation Elimination Designs of Battery Thermal Management System for Phase Change Materials Based on Triply Periodic Minimal Surface

Study on thermal aspects of lithium-ion battery packs with phase change material and air cooling system

Experimental and Numerical Investigations of a Thermal Management System Using Phase-Change Materials and Forced-Air Cooling for High-Power Li-Ion Battery Packs

Liquid Cooling with Phase Change Materials for Cylindrical Li-ion Batteries: an Experimental and Numerical Study