Abstract:The development of phase change material (PCM) for battery thermal management poses key limitations on its reliability caused by leakage and shape deformation under high temperature. In this work, a kind of phase changeable and hydrophobic polymer skeleton is grown in situ in a paraffin (PA)/expanded graphite matrix to obtain the leakage-proof composite PCM (CPCM) at the kilogram-level. Benefiting from the additional latent heat provided by the phase changeable alkyl side chains of the polymer skeleton, the obtained CPCM shows a high latent heat of 120.3 J g–1 coupled with a thermal conductivity of 2.92 W m–1 K–1. Most importantly, the three-dimensional cross-linking main chain and the hydrophobic alkyl side chains endow the obtained CPCM with extraordinary shape stability under high temperatures up to 250 °C and high PA adsorbing capability, respectively. As a consequence, the CPCM presents excellent antileakage performance for the battery module (21 V/16 Ah) under harsh working conditions, i.e., 50 charge–discharge cycles at 3C–4C, thus giving rise to a durable cooling performance. The maximum temperature (Tmax) and temperature difference (ΔTmax) of the battery module can be controlled constant at 50.9 and 5.0 °C during the cycles, respectively. By stark contrast, owing to the obvious leakage phenomenon, the battery module with traditional CPCM adopting a classical low-density polyethylene skeleton shows increasing Tmax and ΔTmax during the cycles.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00235?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00235</a>.Details of charge–discharge parameters; comparison of the latent heat; cyclic stability of the ΔHm, Tmax, and ΔTmax of the battery module upon cycling; preparation procedures of CPCM; schematic diagram of the battery module; DSC curves of OA, PA, LDPE, and CPCM; and current and voltage trace (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00235/suppl_file/ae1c00235_si_002.pdf">PDF</a>)This article has not yet been cited by other publications.

Preparation of Composite Cooling Boards Composed of Thermal Conductive Silica Gel and Phase Change Materials for Battery Thermal Management

Bidirectionally High Thermal Conductive Phase Change Materials with Arrayed Radially Oriented Boron Nitride Nanosheets for Battery Pack Thermal Management

Effect Analysis on Thermal Management of Power Batteries Utilizing a Form-Stable Silicone Grease/Composite Phase Change Material

Experimental investigation on room-temperature flexible composite phase change materials in thermal management of power battery pack

A phase change material with enhanced thermal conductivity and secondary heat dissipation capability by introducing a binary thermal conductive skeleton for battery thermal management

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Temperature control of battery modules through composite phase change materials with dual operating temperature regions

Flexible Composite Phase-Change Material with Shape Recovery and Antileakage Properties for Battery Thermal Management

Heat Transfer Performance Study on Several Composite Phase Change Materials for Battery Thermal Management

High Antileakage and Thermal Conductivity Composite Phase-Change Material with Anisotropy Expanded Graphite for Battery Thermal Management

Composite phase change materials with carbon foam and fibre combination for efficient battery thermal management: Dual modulation roles of interfacial heat transfer

Thermal management of cylindrical battery pack based on a combination of silica gel composite phase change material and copper tube liquid cooling

High thermal conductivity composite phase change material with nano-Ag particles modified diatomite and expanded graphite for improving battery thermal management efficiency

Investigation on the Thermal Contact Resistance Mechanism of a Composite Phase Change Material for Battery Thermal Management

Multifunctional flexible composite phase change material with high anti-leakage and thermal conductivity performances for battery thermal management

A comprehensive review of composite phase change material based thermal management system for lithium-ion batteries

An innovative battery thermal management with thermally induced flexible phase change material

Ultrareliable Composite Phase Change Material for Battery Thermal Management Derived from a Rationally Designed Phase Changeable and Hydrophobic Polymer Skeleton

Experimental and numerical investigation of a battery thermal management system using a novel EVA-based thermal-induced flexible composite phase change material

A novel stable and flexible composite phase change materials for battery thermal management

Thermal management of Lithium-ion battery pack through the application of flexible form-stable composite phase change materials