Abstract:Unburned carbon particles in coal gasification fine ash can be recycled as fuel for further combustion and ash particles are highly valuable for utilization, which can only be of secondary utilization if the two are separated. Due to the small size of gasification fine ash particles, triboelectrostatic separation has more technological advantages than traditional flotation. In this study, a first attempt has been made to separate carbon and ash particles from coal gasification fine ash by triboelectrostatic separation. It aims to investigate the feasibility of the method and to study how different mineralogical characteristics affect triboelectrostatic separation. Herein, proximate analysis, X-ray fluorescence spectroscopy analysis and X-ray diffraction analysis were adopted to investigate the fundamental nature of raw ash. The triboelectrostatic separation experiments under single conditions were conducted. Carbon enriched products with loss on ignition of 37.45% and ash enriched products with that of 10.32% were obtained whose yield was 29.81% and 32.98%, respectively. Results demonstrated the feasibility of the dry technology to separate residual carbon and ash particles in coal gasification fine ash. Furthermore, triboelectrostatic separation of coal gasification fine ash was significantly affected by differences in particle size and microtopography. Particles of small size were firstly adsorbed by plates in the high voltage electric field. The charge capacity of flake and blocky carbon particles was stronger than that of bonded and flocculated carbon particles allowing them easier to be separated.

Effect of particles micro characteristics destroyed by ball milling on fly ash electrostatic separation

Experimental study on decarburization of fine fly ash by electric separation

Discrete element numerical simulation of fly ash triboelectrostatic separation in a nonlinear electric field

Cfd-Dem Investigation of Particle Elutriation with Electrostatic Effects in Gas-Solid Fluidized Beds

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

Triboelectrostatic separation of coal gasification fine ash based on different mineralogical characteristics

Removal of carbon and dioxins from municipal solid waste incineration fly ash by ball milling and flotation methods

Effect of Milling Material on Characteristics and Reactivity of Mechanically Treated Fly Ash to Produce PCDD/F

The Micro Structure of Fly Ash and Dry Removing Carbon

Enhanced Recovery of Magnetic Materials from Fly Ash Using Spiral Dry Magnetic Separation Technique

Removal of unburned carbon from fly ash using enhanced gravity separation and the comparison with froth flotation

Suppressing Heavy Metal Leaching Through Ball Milling of Fly Ash

Separation of unburned carbon from coal fly ash: A review

Effects of Acoustic and Pulse Corona Discharge Coupling Field on Agglomeration and Removal of Coal-fired Fine Particles

Effect of Feed Forms on the Results of Melting of Fly Ash by a DC Plasma Arc Furnace

Coagulation of Charge Particles with an R-R Distribution in an Electric Field

Numerical simulation on the deposition characteristics of MSWI fly ash particles in a cyclone furnace

Experimental Research of Separating Micro-pulverized Coal in Storage Milling System

Effect of particle size composition on the separation of waste printed circuit boards by vibrated gas–solid fluidized bed

Investigation of electrical field effect on the fluidization characteristics in a two-dimensional fluidized bed

Enhancing fine particle separation by hybrid-electrostatic-turbulence coagulation: An experimental and numerical investigation