Abstract:Degradation of polychlorinated dibenzo- p-dioxins and dibenzofurans in municipal solid waste incinerator fly ash is beneficial to its risk control. Fly ash was treated in a full-scale thermal degradation system (capacity 1 t d-1) to remove polychlorinated dibenzo- p-dioxins and dibenzofurans. Apart from the confirmation of the polychlorinated dibenzo- p-dioxin and dibenzofuran decomposition efficiency, we focused on two major issues that are the major obstacles for commercialising this decomposition technology in China, desorption and regeneration of dioxins and control of secondary air pollution. The toxic equivalent quantity values of polychlorinated dibenzo- p-dioxins and dibenzofurans decreased to <6 ng kg-1 and the detoxification rate was ⩾97% after treatment for 1 h at 400 °C under oxygen-deficient conditions. About 8.49% of the polychlorinated dibenzo- p-dioxins and dibenzofurans in toxic equivalent quantity (TEQ) of the original fly ash were desorbed or regenerated. The extreme high polychlorinated dibenzo- p-dioxin and dibenzofuran levels and dibenzo- p-dioxin and dibenzofuran congener profiles in the dust of the flue gas showed that desorption was the main reason, rather than de novo synthesis of polychlorinated dibenzo- p-dioxins and dibenzofurans in the exhaust pipe. Degradation furnace flue gas was introduced to the municipal solid waste incinerator economiser, and then co-processed in the air pollution control system. The degradation furnace released relatively large amounts of cadmium, lead and polychlorinated dibenzo- p-dioxins and dibenzofurans compared with the municipal solid waste incinerator, but the amounts emitted to the atmosphere did not exceed the Chinese national emission limits. Thermal degradation can therefore be used as a polychlorinated dibenzo- p-dioxin and dibenzofuran abatement method for municipal solid waste incinerator source in China.

Removal of carbon and dioxins from municipal solid waste incineration fly ash by ball milling and flotation methods

Stabilization of Heavy Metals in Municipal Solid Waste Circulating Fluidized Bed Incineration Fly Ash by Fusion–hydrothermal Method

The Degradation of PCDD/Fs in Fly Ash Using Dielectric Barrier Discharge in a Lab-Scale Reactor

Degradation of Dioxins in Chelated Municipal Solid Waste Incineration Fly Ash by Low-Temperature Pyrolysis

Mechanochemical Treatment of Fly Ash and De Novo Testing of Milled Fly Ash

Coupling of alkaline and mechanical modified fly ash for HCl and SO 2 removal in the municipal solid waste incineration plant

Microwave-Assisted Hydrothermal Treatment with Soluble Phosphate Added for Heavy Metals Solidification in MSWI Fly Ash

Dioxins Reformation and Destruction in Secondary Copper Smelting Fly Ash under Ball Milling

Mechanochemical Degradation of Ocdd/Ocdf in Fly Ash from Medical Waste Incinerators

Characterization of Dioxins and Heavy Metals in Chelated Fly Ash

Utilization of Mechanochemically Pretreated Municipal Solid Waste Incineration Fly Ash for Supplementary Cementitious Material

A full-scale study on thermal degradation of polychlorinated dibenzo- p-dioxins and dibenzofurans in municipal solid waste incinerator fly ash and its secondary air pollution control in China

Degradation of PCDD/Fs in MSWI Fly Ash Using a Microwave-Assisted Hydrothermal Process

Effect of supercritical water oxidation onthe PCDD/FS and heavy metals in incineration fly ash

Mechanical Treatment of MSWI fly Ash: A Way Forward to Inhibit PCB Reformation

Degradation technologies and mechanisms of dioxins in municipal solid waste incineration fly ash: A review

Suppressing Heavy Metal Leaching Through Ball Milling of Fly Ash

Effect of Milling Material on Characteristics and Reactivity of Mechanically Treated Fly Ash to Produce PCDD/F

Emission characteristics of dioxins during iron ore Co-sintering with municipal solid waste incinerator fly ash in a sintering pot

Decomposition and reformation pathways of PCDD/Fs during thermal treatment of municipal solid waste incineration fly ash.

Thermal cotreatment of municipal solid waste incineration fly ash with sewage sludge for PCDD/Fs decomposition and reformation suppression