Abstract:Ceramic Li6.55Al0.2La3Zr2O12 (LLZO) is one of the most attractive electrolyte materials for solid-state batteries that combined with metallic Li anodes holds the promise for safer and more energetically dense battery, but its performance is limited by the increases in electrolyte-electrode interfacial resistances upon cycling. The combination of Li + -conducting ceramics and polymers offers a new pathway to create better electrolytes with both high ionic conductivity and good (electro)mechanical interfacial properties. We optimized two-step annealing processing conditions for the fabrication of low temperature cubic-LLZO nanofibers and Li 2 CO 3 removal from the surface of the nanofibers. Using industrially relevant roll-to-roll electrospinning and slot-die coating, we fabricated thin composite membranes with reproducible thickness down to 50 microns. We investigated PEO based composite polymer electrolyte (CPE) with a high, 50 wt% loading of Al-doped LLZO nanofibers in comparison with nanofiber-free PEO electrolyte. XPS measurements show that LLZO is not present at the composite electrolyte surface, and solid electrolyte interphase (SEI) formation is dictated solely by PEO and LiTFSI when reacting with Li metal. Electrochemical SEI formation, studied by cyclic voltammetry, shows SEI formation is identical with and without up to 75 wt% LLZO in the electrolyte. Galvanostatic cycling with lithium symmetric cells shows that the critical current density (CCD) can be tripled by including 50 wt% LLZO, but half cell cycling reveals this comes at the cost of CE. Varying the LLZO loading shows that even a small amount of LLZO drastically lowers the CE, from 88% at 0 wt% LLZO to 77% at just 2 wt% LLZO. Mesoscale modelling reveals that the increase in CCD cannot be explained by an increase in the macroscopic or microscopic stiffness of the electrolyte; only the microstructure of the LLZO nanofibers in the PEO-LiTFSI matrix slows dendrite growth by presenting physical barriers that the dendrites must push or grow around. This tortuous lithium growth mechanism around the LLZO is corroborated with mass spectrometry imaging. Electrochemical impedance spectroscopy (EIS) analysis showed comparable bulk ionic and interfacial resistances with and without nanofibers, indicating that PEO dominates Li + transport and interfacial chemistry. The total Li-ion conductivity of the composite is still governed by the polymer matrix due to high interfacial resistance between the garnet particles and the PEO/LiTFSI matrix. This work highlights important elements to consider in the design of CPEs for high-efficiency lithium metal batteries.

Boron Surface Treatment of Li7La3Zr2O12 Enabling Solid Composite Electrolytes for Li‐metal Battery Applications

Li7La3Zr2O12 interface functionalization via boric acid treatment: A step to contact improvement

Surface Li2CO3 Mediated Phosphorization Enables Compatible Interfaces of Composite Polymer Electrolyte for Solid‐State Lithium Batteries

(Invited) Advancing Understanding of Composite Polymer Electrolytes with LLZO Nanofibers

Interface Functionalization of Composite Electrolyte by Lix-CeO2 Layer on the Surface of Li6.4La3Zr1.4Ta0.6O12

Ammonium fluoride induced barrier-free and oxygen vacancy enhanced LLZO powder for fast interfacial lithium-ion transport in composite solid electrolytes

Surface modification strategies for an improved interfacial compatibility between LLZO and a polymer substrate for applications in high-performance solid-state Li-metal batteries

Understanding Boron Chemistry as the Surface Modification and Electrolyte Additive for Co-free Lithium-Rich Layered Oxide

Garnet/polymer solid electrolytes for high-performance solid-state lithium metal batteries: The role of amorphous Li2O2

Understanding Boron Chemistry as the Surface Modification and Electrolyte Additive for Co‐Free Lithium‐Rich Layered Oxide

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Surface Coordination of Garnet Fillers Improves the Organic–Inorganic Interfacial Compatibility of Composite Solid Electrolyte

Surface modification of garnet fillers with polymeric sacrificial agent enables compatible interfaces of composite solid-state electrolytes

Enhance electrochemical performance of LiFePO4 cathode material by Al-doped Li7La3Zr2O12 and carbon co-coating surface modification

In Situ Construction of Ether-Based Composite Electrolyte with Stable Electrode Interphase for High-Performance Solid State Lithium Metal Battery

A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Plasma optimized Li7La3Zr2O12 with vertically aligned ion diffusion pathways in composite polymer electrolyte for stable solid-state lithium metal batteries

A High-Filled Li 7 La 3 Zr 2 O 12 /Polypropylene Oxide Composite Solid Electrolyte with Improved Lithium-Ion Transport and Safety Performances for High-Voltage Li Batteries

Lithium perborate-based composite polymer electrolytes for all-solid-state lithium-ion batteries: performance enhancement and stability

Surface Defects Reinforced Polymer‐Ceramic Interfacial Anchoring for High‐Rate Flexible Solid‐State Batteries