Abstract:Metal additive manufacturing (AM) enables customizable, on-demand parts, allowing for new designs and improved engineering performance. Yet, the ability to control AM metal alloy microstructures (i.e., grain morphology, crystallographic texture, and phase content) is lacking. This work performs corroborative neutron diffraction and large-scale electron backscatter diffraction (EBSD) measurements to assess crystallographic texture in electron beam melted (EBM) Ti-6Al-4V as a function of scan strategy and build height. Texture components for one raster and two spot melt scan strategies were evaluated using a triclinic specimen symmetry to capture all possible texture components, which were found to be considerably different than previously reported values from studies employing orthotropic specimen symmetry. This finding highlights the importance of a standard method and best practice for assessing textures produced by AM. Texture was found to vary between scan strategies, but changed minimally as a function of build height. Parent phase β-Ti reconstructions obtained from as-built crystallographic orientations revealed spot melt scan strategies produced finer equiaxed/columnar grains with clear 001 β build direction fiber textures, whereas the raster scan strategy produced large columnar grains and a weaker 001 β build direction fiber texture. The observed grain morphologies agree with those predicted by solidification theory for the thermal gradients and solidification velocities experienced during the build process. The presence of a strong 001 β fiber orientation (typical of cubic solidification) produced by spot melting was found to correlate with a previously unreported 01 1 ¯ 2 α fiber texture in the as-built condition and colony microstructures. The 01 1 ¯ 2 α fiber texture was weakly observed for the raster scan strategy, and 001 β oriented grains preferentially transformed into α' martensite with orientations between 1 1 ¯ 00 α and 11 2 ¯ 0 α . This shift in product α-Ti orientations has not yet been reported, and further work is recommended to understand these crystallographic signatures in the context of solid-state phase transformations. The presence of the 01 1 ¯ 2 α fiber texture is proposed as a useful diagnostic for evaluating the solidification or transformed microstructure condition (e.g., grain morphology and texture) of Ti-6Al-4V AM builds via accessible techniques like laboratory X-ray diffraction.

Texture Analysis of Hot Rolled Martensitic and Bainitic Steels by Electron Backscatter Diffraction to Quantify Parent Austenite States

Influence of crystallographic texture on Young's modulus of various Alloy 82H welds

Identification and quantification of martensite in ferritic-austenitic stainless steels and welds

Understanding the Mechanisms of Texture Evolution of a Fe-24Cr-22Ni-7Mo Super Austenitic Stainless Steel During cold Rolling and Annealing

Crystallographic Analysis of Lath Martensite in a 13Cr-5Ni Steel by Electron Backscattering Diffraction

Texture and microstructure evolution during cold rolling of a strip cast and of a hot rolled austenitic stainless steel

Improving parent-austenite twinned grain reconstruction using electron backscatter diffraction in low carbon austenite

Unusual Rolling Texture in Ferritic/Martensitic Steel

Crystal Plasticity-Based Assessment of Constitutive Laws for Microstructure and Rolling Texture Capture in Ferritic Stainless Steel During Cold Rolling

Electron backscattered diffraction method in the analysis of deformed steel structures

Characterization of Texture Evolution During Recrystallization by Laser-Induced Transient Thermal Grating Method

Texture evolution as a function of scan strategy and build height in electron beam melted Ti-6Al-4V

EBSD-Based Techniques for Characterization of Microstructural Restoration Processes During Annealing of Metals Deformed to Large Plastic Strains

Microstructural and microtextural characterization of oxide scale on steel using electron backscatter diffraction

Crystallographic Reconstruction Study of the Effects of Finish Rolling Temperature on the Variant Selection During Bainite Transformation in C-Mn High-Strength Steels

Recent progress in visualization and digitization of coherent transformation structures and application in high-strength steel

Investigating the Difference in Mechanical Stability of Retained Austenite in Bainitic and Martensitic High-Carbon Bearing Steels using in situ Neutron Diffraction and Crystal Plasticity Modeling

A Comprehensive Study on Texture Development and Twin-Related Domain Evolution Following Hot Compression in a Super Austenitic Stainless Steel

Microstructure and texture evolutions of 310S austenitic stainless steel after cryogenic rolling and subsequent annealing: X-ray and electron backscatter diffraction studies

Machine learning enhanced analysis of EBSD data for texture representation

Prior austenite grain measurement: A direct comparison of EBSD reconstruction, thermal etching and chemical etching