Abstract:Under mechanical loading, the strain hardening behavior of crystalline face-centered cubic (FCC) metals is of critical importance in determining fracture behavior and overall mechanical performance. While strain hardening is typically accompanied by a decrease in ductility, it can also simultaneously enhance the material's resistance to plastic deformation and improve its load bearing capacity. Hence, we conducted a detailed study using copper (Cu) single-crystal micropillars as a model system to investigate and delineate the relationship between strain hardening and defect behavior. We employed in situ compression in a scanning electron microscope (SEM) and dislocation density-based crystal plasticity (DCP) modeling. The strain hardening rate varied with the compression crystallographic orientation, ranging from negligible values (of approximately 80 MPa) to relatively high hardening rates (of approximately 1150 MPa) for nominal strains of up to 15%. Various analysis methods were applied, including slip trace characterization, electron backscatter diffraction (EBSD), transmission electron microscopy (TEM), and transmission Kikuchi diffraction (TKD). These techniques allowed us to identify the distributions of active slip systems, dislocation structures after compression, and correlated internal lattice rotations. Furthermore, the DCP model was developed to specifically understand how serration events are related to dislocation-density evolution or strain bursts, and this was validated with the micropillar experiments. This integrated experimental and modeling investigation offers valuable insights and predictions regarding the evolution of both total and partial dislocations, including Hirth and Lomer junctions, as well as lattice rotations.

Correlation between the topologically close-packed structure and the deformation behavior of metallic Cu 64.5 Zr 35.5

Deformation-induced Interfacial Transition Zone in Cu/V Nanolamellar Multilayers

Numerical investigation of fracture behavior of nanostructured Cu with bimodal grain size distribution

Atomic-scale Heterogeneity in Large-Plasticity Cu-doped Metallic Glasses

Correlation of stacking fault energy with deformation mechanism in Cu–(2, 20)Zn alloys

An investigation of the combined size and rate effects on the mechanical responses of FCC metals

Deformation of Fe and Ag Precipitates in Cu Matrix

Co-deformation in Cu–6 Wt.% Ag Nanocomposites

Deformation and failure by weaving dislocation networks in body-centered-cubic tungsten

Atomic-scale investigation of interactions between Cu solute and defects in Zr alloys

Hot Deformation Behavior and Microstructure Evolution of High-Strength Al-Zn-Mg-Cu Alloy

Deformation Mechanisms of FCC-Structured Metallic Nanocrystal with Incoherent Twin Boundary

Influence of icosahedron and icosahedron-like on plastic deformation of Co50Mn50 alloy under compressive conditions

Copper effects on the microstructures and deformation mechanisms of CoCrFeNi high entropy alloys

The Size-Dependent Non-Localized Deformation in A Metallic Alloy

Cold deformation behavior and microstructure evolution of biomedical Cu-containing L605 alloy

Correlations among stress corrosion cracking, grain-boundary microchemistry, and Zn content in high Zn-containing Al–Zn–Mg–Cu alloys

A fundamental understanding of how dislocation densities affect strain hardening behavior in copper single crystalline micropillars

Revealing the High Strength and High Thermal Stability of a Nano-Lamellar Cu-0.1 At. % Zr Alloy

Structural Feature of Cu64Zr36 Metallic Glass on Nanoscale: Densely-packed Clusters with Loosely-Packed Surroundings

B12-P-07 in Situ Investigate the Plastic Deformation Behavior of Small-Size Cobalt