Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

A high-precision mechanical absolute-rotation sensor

A Three-dimension High-Precision and Non-contact Dynamic Angular Displacement Measurement System based on Heterodyne Interference

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

High Precision Inertial Sensors on a One Inch Diameter Optic

A Continuous Dual-Axis Atomic Interferometric Inertial Sensor

A Vacuum-Compatible Cylindrical Inertial Rotation Sensor with Picoradian Sensitivity

A Multi-Orientation Low-Frequency Rotational Accelerometer.

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

A Laser Walk-off Sensor for High-Precision Low-Frequency Rotation Measurements.

High-precision Rotation Angle Detection Based on Optomechanical Microscale HRGs

High-precision angular rate detection based on an optomechanical micro hemispherical shell resonator gyroscope

A Novel Method and System Implementation for Precise Estimation of Single-Axis Rotational Angles

The Development of a New IFOG-Based 3C Rotational Seismometer

A Novel Method of Measuring Spatial Rotation Angle Using Mems Tilt Sensors

High Sensitivity and Full-Circle Optical Rotary Sensor for Non-Cooperatively Tracing Wrist Tremor With Nanoradian Resolution

Sensitivity and control of a 6-axis fused-silica seismometer

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

A T-Shaped Mems Differential Resonant Accelerometer with Module-Base Demonstration of >134 Db Dynamic Range and <1 Mdeg Absolute Tilt Angle Precision

Compact inertial sensors for measuring external disturbances of physics experiments

Intrinsically accurate sensing with an optomechanical accelerometer

A high-sensitivity rotatable 3D displacement sensor