Abstract:Nanostructured metals and alloys often exhibit high strengths but at the expense of hallmark ductility. Through harnessing the far-from-equilibrium processing conditions of laser powder-bed fusion (L-PBF) additive manufacturing, we develop a dual-phase nanolamellar structure comprised of FCC/L1 2 and BCC/B2 phases in a Ni 40 Co 20 Fe 10 Cr 10 Al 18 W 2 eutectic high-entropy alloy (EHEA), which exhibits a combination of ultrahigh yield strength (>1.4 GPa) and large tensile ductility (∼17%). The deformation mechanisms of the additively manufactured EHEA are studied via in-situ synchrotron X-ray diffraction and high-resolution transmission electron microscopy. The high yield strength mainly results from effective blockage of dislocation motion by the high density of lamellar interfaces. The refined nanolamellar structures and low stacking fault energy (SFE) promote stacking fault (SF)-mediated deformation in FCC/L1 2 nanolamellae. The accumulation of abundant dislocations and SFs at lamellar interfaces can effectively elevate local stresses to promote dislocation multiplication and martensitic transformation in BCC/B2 nanolamellae. The cooperative deformation of the dual phases, assisted by the semi-coherent lamellar interfaces, gives rise to the large ductility of the as-printed EHEA. In addition, we also demonstrate that post-printing heat treatment allows us to tune the non-equilibrium microstructures and deformation mechanisms. After annealing, the significantly reduced SFE and thicknesses of the FCC nanolamellae further facilitate the formation of massive SFs. The dissolution of nano-precipitates in the BCC/B2 nanolamellae reduces spatial confinement and further promotes martensitic transformation to enhance work hardening. Our work provides fundamental insights into the rich variety of deformation mechanisms underlying the exceptional mechanical properties of the additively manufactured dual-phase nanolamellar EHEAs.

Evidence of twinning-induced plasticity (TWIP) and ultrahigh hardness in additively-manufactured near-eutectic Ni–Nb

A Molecular Dynamics Study on Mechanical Performance and Deformation Mechanisms in Nanotwinned NiCo-based Alloys with Nano-Precipitates under High Temperatures

Atomistic insights into the synergistic effect of nanotwins and nano-precipitates on the mechanical behavior of superalloys

Ultra-strong nanotwinned Al-Ni solid solution alloys with significant plasticity.

Multi-scale annealing twins generate superior ductility in an additively manufactured high-strength medium entropy alloy

High-order Hierarchical Nanotwins with Superior Strength and Ductility

Achieving Superelasticity in Additively Manufactured Ni-Lean NiTi by Crystallographic Design

Extraordinary superplasticity at low homologous temperature and high strain rate enabled by a multiphase nanocrystalline network

Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

Deformation mechanisms in an additively manufactured dual-phase eutectic high-entropy alloy

High-Strength Nanotwinned Al Alloys with 9R Phase

Ultrastrong nanotwinned titanium alloys through additive manufacturing

Twinning induced strain hardening and plasticity in a γ''-precipitated medium-entropy alloy with ultrahigh yield strength

Interface-Mediated Twinning-Induced Plasticity in a Fine Hexagonal Microstructure Generated by Additive Manufacturing

Ultrahigh strain hardening in a transformation-induced plasticity and twinning-induced plasticity titanium alloy

Multiscale crack deflection overcomes intermediate-temperature brittleness via hierarchical fiber-like structure in a dual nanoprecipitation-strengthened high-entropy alloy fabricated by selective laser melting

Evolutionary mechanisms in the plastic deformation of γ'-Ni 3 (Al, Ti)-strengthened additively manufactured nickel-based 939 superalloys at intermediate temperatures

Microstructure and Properties of a Novel Ni-Ti-Cr-Mo-Nb Alloy Fabricated in Situ by Dual-Wire Arc Additive Manufacturing

Peritectic Solidification Kinetics and Mechanical Property Enhancement in a Rapidly Solidified Ti–48 at% Al–8 at% Nb Alloy via Hierarchical Twin Microstructure

Additive manufacturing of an ultrastrong, deformable Al alloy with nanoscale intermetallics

Ultrahigh strength and large plasticity of nanostructured Ti62Nb12.2Fe13.6Co6.4Al5.8 alloy obtained by selectively controlled micrometer-sized phases