Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Organic Light‐Emitting Transistors: Organic Light‐Emitting Transistors Entering a New Development Stage (Adv. Mater. 31/2021)

Organic Light-Emitting Field-Effect Transistors: Device Geometries and Fabrication Techniques

Organic Light‐Emitting Transistors Entering a New Development Stage

En Route to Wide Area Emitting Organic Light‐Emitting Transistors for Intrinsic Drive‐Integrated Display Applications: A Comprehensive Review

Organic Polarized Light‐Emitting Transistors

Organic Field‐Effect Transistors: Challenges and Emerging Opportunities in High‐Mobility and Low‐Energy‐Consumption Organic Field‐Effect Transistors (Adv. Energy Mater. 29/2020)

Improving the Performance of Red Organic Light-Emitting Transistors by Utilizing a High-k Organic/Inorganic Bilayer Dielectric.

Interplay between Charge Injection, Electron Transport, and Quantum Efficiency in Ambipolar Trilayer Organic Light‐Emitting Transistors

Van der Waals Multi‐Layer Heterojunction for Low‐Voltage Organic RGB Area‐Emitting Transistor Array

Editorial: High-Performance Organic Thin-Film Transistors

Improved Performance of Organic Light-Emitting Transistors Enabled by Polyurethane Gate Dielectric

Recent Advances in Multi‐Layer Light‐Emitting Heterostructure Transistors

Improving the Efficiency of Multilayer Organic Light‐Emitting Transistors by Exploring the Hole Blocking Effect

Organic single crystal phototransistors: Recent approaches and achievements

Efficient Ambipolar Organic Light-Emitting Transistors Based on 2-Phenyl-tetracene with Orange Light Emission

Advance in organic field-effect transistors based on metal-organic coordination materials and applications

High-performance and multifunctional organic field-effect transistors

Research Advances on Organic Light-Emitting Devices

Redistributed Current Density in Lateral Organic Light‐Emitting Transistors Enabling Uniform Area Emission with Good Stability and Arbitrary Tunability

Achieving Bright Organic Light Emitting Field Effect Transistors with Sustained Efficiency through Hybrid Contact Design

High Mobility Emissive Excimer Organic Semiconductor Towards Color‐tunable Light‐emitting Transistors