Abstract:An approach to produce organic light-emitting transistors (OLETs) containing a laterally arranged heterojunction structure, which minimizes exciton quenching at the metal electrodes, is described. This device configuration provides an organic light-emitting diode (OLED) structure where the anode (source) electrode, hole-transport material (field-effect material), light-emitting material, and cathode (drain) electrode are laterally arranged, thus offering a chance to control the electrolummescent intensity by changing the gate bias. Pentacene and tris(8-quinolinolato)aluminum (Alq(3)) are employed as the field-effect and light-emitting materials, respectively. ne laterally arranged heterojunction structures are achieved by successively inclined deposition of the field-effect and light-emitting materials. After deposition of pentacene, a narrow gap of about 10-20 nm between the drain electrode and pentacene was obtained, thereby creating an opportunity to fabricate a laterally arranged heterojunction. In the OLETs, unsymmetrical source and drain electrodes, that is, An and LiF/Al ones, are used to ensure efficient injection of holes and electrons. Visible-light emission from OLETs is observed under ambient atmosphere. This result is ascribed to efficient carrier injection and transport, formation of a heterojunction, as well as good luminescence from the organic emissive layer. The device structure serves as an excellent model system for OLETs and demonstrates a general concept of adjusting the charge-carrier injection and transport, as well as the electroluminescent properties, by forming laterally arranged heterojunctions.

Improving the Efficiency of Multilayer Organic Light‐Emitting Transistors by Exploring the Hole Blocking Effect

Improving the Performance of Red Organic Light-Emitting Transistors by Utilizing a High-k Organic/Inorganic Bilayer Dielectric.

Interplay between Charge Injection, Electron Transport, and Quantum Efficiency in Ambipolar Trilayer Organic Light‐Emitting Transistors

Efficient Energy Transfer in Organic Light-Emitting Transistor with Tunable Wavelength

An Effective Strategy to Construct Highly Efficient Deep‐Blue Organic Light‐Emitting Field‐Effect Transistors

Achieving a Significantly Increased Efficiency in Nondoped Pure Blue Fluorescent OLED: A Quasi‐Equivalent Hybridized Excited State

Achieving Bright Organic Light Emitting Field Effect Transistors with Sustained Efficiency through Hybrid Contact Design

High‐Efficiency Single‐Component Organic Light‐Emitting Transistors

Improved Efficiency in Blue Phosphorescent Organic Light‐Emitting Devices Using Host Materials of Lower Triplet Energy Than the Phosphorescent Blue Emitter

Realizing Highly Efficient Blue Electrofluorescence by Optimized Hybridized Local and Charge Transfer State and Balanced Carrier Mobilities

Organic Light‐Emitting Transistors: High‐Efficiency Single‐Component Organic Light‐Emitting Transistors (Adv. Mater. 37/2019)

Organic Light‐Emitting Transistors Containing a Laterally Arranged Heterojunction

Organic Single‐crystal Light‐emitting Transistors with External Quantum Efficiency over 20%

Achieving Ultra-High Efficiency by Tuning Hole Transport and Carrier Balance in Fluorescent Blue Organic Light-Emitting Diode with Extremely Simple Structure

Hole injection control of electron blocking layer for broad recombination zone and low-efficiency roll-off in phosphorescent organic light emitting device

An Efficient Blue Organic Light Emitting Structure

Host-Free Deep-Blue Organic Light-Emitting Transistors Based on a Novel Fluorescent Emitter.

Efficient Hole Injection in Blue Organic Light-Emitting Devices by Using a Double Hole Injection Layer to Improve Chromaticity and Electrical Characteristics

Improving Electron Injection of Organic Light-Emitting Transistors via Interface Layer Design

Efficient Trilayer Phosphorescent Organic Light-Emitting Devices Without Electrode Modification Layer and Its Working Mechanism

Efficient Ambipolar Organic Light-Emitting Transistors Based on 2-Phenyl-tetracene with Orange Light Emission