Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

Advance in organic field-effect transistors based on metal-organic coordination materials and applications

Organic Light-Emitting Field-Effect Transistors: Device Geometries and Fabrication Techniques

High-performance and multifunctional organic field-effect transistors

Editorial: High-Performance Organic Thin-Film Transistors

Diketopyrrolopyrrole Based Organic Semiconductor Materials for Field-Effect Transistors

Organic Field‐Effect Transistors: Challenges and Emerging Opportunities in High‐Mobility and Low‐Energy‐Consumption Organic Field‐Effect Transistors (Adv. Energy Mater. 29/2020)

Toward Efficient Charge Transport of Polymer-Based Organic Field-Effect Transistors: Molecular Design, Processing, and Functional Utilization

Recent Advances on π-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Semiconductor/dielectric Interface in Organic Field-Effect Transistors: Charge Transport, Interfacial Effects, and Perspectives with 2D Molecular Crystals

Unidirectional coating technology for organic field-effect transistors: materials and methods

High‐Mobility Conjugated Polymers Based on Fused‐Thiophene Building Blocks

Tutorial: Organic field-effect transistors: Materials, structure and operation

Interface Engineering in Organic Field-Effect Transistors: Principles, Applications, and Perspectives

Development of fullerenes and their derivatives as semiconductors in field-effect transistors: Exploring the molecular design

Organic Semiconductors of Phthalocyanine Compounds for Field Effect Transistors (FETs)

Doping: A Key Enabler for Organic Transistors

Recent progress in the development of n-type organic semiconductors for organic field effect transistors

One-dimensional (1D) Micro/nanostructures of Organic Semiconductors for Field-Effect Transistors

Optical and electrical properties of electrochemically doped organic field effect transistors

Side-Chain Engineering of Conjugated Polymers for High-Performance Organic Field-Effect Transistors

On the Nature of Charge-Injecting Contacts in Organic Field-Effect Transistors