Abstract:Pavement marking retroreflectivity depends on several factors including but not limited to the type of retroreflective optics, binder, installation quality, marking condition, and measurement type/geometry. Texas A&M Transportation Institute (TTI) evaluated the retroreflectivity of 19 pavement marking panels, prepared with different types of glass bead at standard 30-m and non-standard measurement geometries. The non-standard geometries represented typical commercial airplane configurations. The primary purpose of the research was to evaluate the effects of the glass bead refractive index (RI) (1.5 versus 1.9) and the measurement geometry on pavement marking retroreflectivity. Results showed a decrease in retroreflectivity with an increase in observation and entrance angles for both 1.5 and 1.9 RI. The study showed higher retroreflectivity levels for high RI beads at all the geometries evaluated. The result showed that 1.9 RI beads exhibit an average of 171% (862 mcd/m 2 /lx) higher retroreflectivity at standard 30-m car geometry as well as 102% (193 mcd/m 2 /lx) higher retroreflectivity at airplane geometry compared with 1.5 RI beads. The study found that an increase in bead RI had a larger effect on retroreflectivity than did an increase in bead size. The effect of the measurement geometry on the retroreflectivity level of the markings highlights a limitation of using the 30-m car geometry to represent the visibility of markings from a pilot’s perspective. Additional work should be conducted to better assess the visibility of markings from various vehicle platforms and how to best represent the visibility through retroreflectivity measurement.

The method of testing the performance of retroreflective glass beads and special ramp gumming device

Study of the Flexible Clamping Technology on the Detection Platform of Automobile Electric Glass Regulator

Field test method for mechanical properties of existing glass curtain wall structural adhesive

Study of accelerated ageing test methods of sealant applied in curtain wall

Test Method to Evaluate the Effect of Interface Bond Conditions on Top-Down and Reflective Cracking

Simulation analysis of reflective performance of marking glass beads

Measurement of Restitution and Friction Coefficients for Granular Particles and Discrete Element Simulation for the Tests of Glass Beads

Glass Beads for Road Markings: Surface Damage and Retroreflection Decay Study

High retroreflective glass bead with high refractive index, and preparing method for thereof

Method analyses of artifieial test for insulator water migrating

Study of a Quantitative Method to Evaluate the Wear Resistance of Glazed Tiles

A study of premium glass beads for road marking materials

On-site testing method for tensile adhesive strength of existing curtain wall structural silicone sealant

A New Method to Remove the Aging Rtv Coatings on Glass Insulators

A THREE-DIMENSIONAL ANALYSIS ON RETRO-REFLECTIVE CHARACTERISTICS OF GLASS BEADS FIXED IN ROAD MARKINGS

EFFECT OF GLASS BEADS SIZE ON THEIR WET WEATHER RETROREFLECTIVITY

General Testing Method for Refractive Surfaces Based on Reverse Hartmann Test

Influence of construction technology on the retroreflective performance of two-component traffic marking

Repairing Method of Erosion Defect on Liquid Silicon Rubber Umbrella Skirt and Its Performance

Study on the Method for Testing the Water Vapor Diffusion Resistance of Membranes

Effect of Glass Bead Refractive Index on Pavement Marking Retroreflectivity Considering Passenger Vehicle and Airplane Geometries