Abstract:This research explores the optimization of epoxy curing parameters to minimize void formation in 3-IC-Chip-MAPBGA packages, a subset of BGA packages, crucial components in high-density interconnect applications. The study utilizes a systematic approach involving design of experiments (DOE) assisted by statistical JMP tool to manipulate curing profiles, aiming to achieve void reduction while preserving adhesion properties. Various analytical techniques, including X-ray imaging, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), die shear strength tests, and C-Sam analysis for delamination, are employed to analyze void formation, material characteristics, mechanical properties, and structural integrity. The findings demonstrate that the sample with a 2nd step curing profile, identified as sample#3, which includes a ramp time of 15 min, a 1st step curing temperature of 90 °C with a soak time of 20 min, and a 2nd step ramp time of 20 min, exhibits the most favourable outcome in void reduction. This sample shows a notably lower void presence of 3.66 % and the highest die shear strength of 126 MPa. In contrast, the control sample, serving as a reference, displays a void percentage of 7.28 %, nearly twice as high as that of sample#3, and much lower die shear strength of 80 MPa at 25 °C. Adopting the curing profile of sample#3 also leads to a substantial 18.75 % reduction in cycle time compared to the control sample. The study highlights the importance of balancing curing parameters to mitigate void formation and maintain optimal mechanical properties, offering valuable insights for improving the reliability of high-density interconnect applications.

On Legalization of Die Bonding Bumps and Pads for 3D ICs

Routing-aware Legal Hybrid Bonding Terminal Assignment for 3D Face-to-Face Stacked ICs

Simulation and Experimental Analysis of Thermomechanical Stress Around Interconnects for W2W Hybrid Bonding

A routing framework for technology migration with bump encroachment

O.O: Optimized One-die Placement for Face-to-face Bonded 3D ICs

Hybrid Bonding for Ultra-High-Density Interconnect

Redundant Vias Insertion for Performance Enhancement in 3D ICs.

Effective Analytical Placement for Advanced Face-to-Face-Bonded Circuit Designs.

An Effective Detailed Placement Algorithm for Large-Scale Mix-Mode IC Design

Analytical Heterogeneous Die-to-Die 3D Placement with Macros

Wafer-to-Wafer Hybrid Bonding Development by Advanced Finite Element Modeling for 3-D IC Packages

Analytical Die-to-Die 3D Placement with Bistratal Wirelength Model and GPU Acceleration

Integrated Interlayer Via Planning And Pin Assignment For 3d Ics

Thermal-Aware 3d Placement

Integrated Algorithm for 3-D IC Through-Silicon Via Assignment

Optimization of novel two-step curing method for die stack epoxy bonding to reduce voids in Ball Grid Array packages for high-density interconnect applications

A Multilevel Analytical Placement for 3D ICs

Effects of Bonding Parameters on the Reliability of Fine-Pitch Cu/Ni/SnAg Micro-Bump Chip-to-Chip Interconnection for Three-Dimensional Chip Stacking

Optimization of 3D IC Routing Based on Thermal Equalization Analysis

Navigating Complex Process and Design Challenges in Hybrid Bonding for Advanced Semiconductor Integration: A Comprehensive Analysis

3D Integration via D2D Bump-Less Cu Bonding with Protruded and Recessed Topographies