Low-temperature metallization of SiC ceramic with Sn0.5Zn via ultrasound assisted formation of an amorphous transition layer

Shu Chen,Zhiwu Xu,Zhongwei Ma,Jiaxu Chen,Jiuchun Yan,Zhengwei Li

DOI: https://doi.org/10.1016/j.ceramint.2023.02.227

IF: 5.532

2023-06-01

Ceramics International

Abstract:The metallization of the SiC ceramic was realized with Sn0.5Zn at a relatively low temperature of 250 °C with the assistance of ultrasonication. This process avoided the use of high temperature, vacuum, or long holding time in traditional metallization methods. Results indicate that fine metallization without defects can be completed under ultrasonication excitation for 20 s. The bonding mechanism was forming a nano-scale layer of non-uniform but continuous amorphous zinc suboxide (ZnO1-x) (even when the Zn was only 0.5 (wt%)), which acted as a transition region from the SiC ceramic substrate to the Sn0.5Zn metal layer. The tensile strength between the Sn0.5Zn layer and the SiC was 12.3 MPa. The acoustic pressure in the liquid Sn0.5Zn pool was calculated via COMSOL Multiphysics software. The simulation results show that alternating positive and negative acoustic pressure existed in the liquid Sn0.5Zn metal, with the highest amplitude of more than 107 Pa, thereby generating the cavitation effect. The collapse of cavitation bubbles resulted in micro-jets, hot spots, and a high cooling rate, promoting the movement of Zn atoms toward the SiC surface and the formation of ZnO1-x.

materials science, ceramics