The effect of changing electrode metal on solution-processed flexible titanium dioxide memristors

Ella Gale,David Pearson,Stephen Kitson,Andrew Adamatzky,Ben de Lacy Costello

DOI: https://doi.org/10.48550/arXiv.1106.6293

2013-12-23

Abstract:Flexible solution processed memristors show different behaviour dependent on the choice of electrode material. Use of gold for both electrodes leads to switchable WORM (Write Once Read Many times) resistive devices. Use of aluminium for both electrodes increases the richness of behaviour allowing both curved and triangular memristive switching resistance memories. A comparison device with an aluminium bottom electrode and gold top electrode only exhibited significant memristive resistance switching when the aluminium electrode was the cathode, suggesting that the electrode is acting as a source/sink of oxygen anions. When the gold electrode was the cathode this electrode was deformed by oxygen evolution. These results demonstrate that aluminium is helpful for stabilising and promoting memristive behaviour in sol-gel TiO$_2$ devices and that changing electrodes from aluminium to gold creates fundamentally different device characteristics.

Materials Science,Mesoscale and Nanoscale Physics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to explore the influence of different electrode materials on the behavior of solution - processed flexible titanium dioxide (TiO₂) memristors. Specifically, the author studied the different characteristics exhibited by memristors when using gold (Au) and aluminum (Al) as electrode materials. By comparing memristors with different electrode materials, the author hopes to reveal how electrode materials affect the behavior of memristors and find ways to control these behaviors.

### Research Background

The memristor is the fourth basic circuit element and has received extensive attention in recent years due to its potential applications in computer memory and neuromorphic computing. The key characteristics of the memristor are the nonlinear voltage - current relationship and that its resistance state can change with the change of charge or magnetic flux. The solution - processed flexible TiO₂ memristor has become the focus of research because of its ease of manufacturing and potential application prospects.

### Research Questions

1. **Influence of Electrode Materials on Memristor Behavior**: Will different electrode materials (such as gold and aluminum) cause the memristor to exhibit different resistance - switching characteristics?
2. **Influence of Electrode Materials on Memristor Stability and Reproducibility**: Is the aluminum electrode more conducive to stabilizing and promoting the resistance - switching behavior of the memristor than the gold electrode?
3. **Influence of Electrode Materials on Memristor Working Mechanism**: Will the electrode materials affect the physicochemical processes inside the memristor, such as the migration of oxygen ions?

### Experimental Design

To answer these questions, the author prepared three types of memristors:
- Au - TiO₂ - Au: Both electrodes are gold.
- Al - TiO₂ - Al: Both electrodes are aluminum.
- Au - TiO₂ - Al: One electrode is aluminum and the other is gold.

By comparing the I - V curves of these three memristors in different voltage ranges, the author analyzed their resistance - switching behavior, stability, and reproducibility.

### Main Findings

1. **Au - TiO₂ - Au Memristor**: It exhibits fuse - like behavior. The initial low - resistance state changes to a high - resistance state after exceeding 2V, and this change is irreversible. This behavior may be suitable for write - once - read - many (WORM) memory.
2. **Al - TiO₂ - Al Memristor**: It exhibits two main behavior patterns:
- Curved I - V curve: It has good stability and reproducibility, similar to the theoretical memristor curve.
- Triangular I - V curve: It exhibits obvious resistance - switching behavior. The low - resistance state has ohmic characteristics, and the high - resistance state has nonlinear characteristics.
3. **Au - TiO₂ - Al Memristor**: When the aluminum electrode is the cathode, it exhibits significant memristive resistance - switching behavior, while when the gold electrode is the cathode, the electrode will be deformed due to oxygen evolution.

### Conclusion

The aluminum electrode helps to stabilize and promote the memristive behavior of the sol - gel TiO₂ memristor, and changing the electrode from aluminum to gold will lead to fundamentally different device characteristics. These results indicate that choosing the appropriate electrode material is crucial for designing and optimizing memristors.