Abstract:Robust synthesis of vertically aligned carbon nanotubes (VACNT) at large scale is required to accelerate deployment of numerous cutting-edge devices to emerging commercial applications. 1 Large-area single-walled (SW) CNT forests with high densities and small diameters are especially important for many applications, yet they are conspicuously absent from the literature due to reproducibility and synthesis challenges, which are further exacerbated when flexible metal foils are used as support instead of traditional Si or quartz wafers. To address this need, we demonstrate that the structural characteristics of SWCNTs produced in a growth regime dominated by bulk diffusion of the gaseous carbon precursor are remarkably invariant over a broad range of process conditions (precursor concentration increased up to 30-fold, catalyst substrate area from 1 cm 2 to 180 cm 2 , growth pressure from 20 to 790 mbar, and gas flowrates up to 8-fold). 2 Forests structural properties are also preserved when growth is transitioned from Si wafers to Inconel metal foils. 3 We show that a simple growth kinetics model that accounts for both reactant bulk diffusion and competing byproduct formation in the presence of excess hydrogen quantitatively reproduces the experimental data in the entire isothermal parameter space. The model enables critical predictions for process scale-up optimization including a potential 6-fold increase in CNT production rate, a ~ 90% carbon conversion efficiency in select conditions, and elimination of reaction rate decay observed at high pressures by using a hydrogen-free growth environment. This model-guided opportunity to substantially improve synthesis throughput and efficiency, in conjunction with the remarkably invariant CNT properties on both metal and insulating substrates, is appealing for reliable VACNT device fabrication at both small and industrial scales. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. References Rao, R.; Pint, C. L.; Islam, A. E.; Weatherup, R. S.; Hofmann, S.; Meshot, E. R.; Wu, F.; Zhou, C.; Dee, N.; Amama, P. B.; Carpena-Nuñez, J.; Shi, W.; Plata, D. L.; Penev, E. S.; Yakobson, B. I.; Balbuena, P. B.; Bichara, C.; Futaba, D. N.; Noda, S.; Shin, H.; Kim, K. S.; Simard, B.; Mirri, F.; Pasquali, M.; Fornasiero, F.; Kauppinen, E. I.; Arnold, M.; Cola, B. A.; Nikolaev, P.; Arepalli, S.; Cheng, H.-M.; Zakharov, D. N.; Stach, E. A.; Zhang, J.; Wei, F.; Terrones, M.; Geohegan, D. B.; Maruyama, B.; Maruyama, S.; Li, Y.; Adams, W. W.; Hart, A. J. Carbon Nanotubes and Related Nanomaterials: Critical Advances and Challenges for Synthesis toward Mainstream Commercial Applications. ACS Nano 2018 , 12 , 11756-11784. Park, S. J.; Moyer-Vanderburgh, K.; Buchsbaum, S. F.; Meshot, E. R.; Jue, M. L.; Wu, K. J.; Fornasiero, F. Synthesis of wafer-scale SWCNT forests with remarkably invariant structural properties in a bulk-diffusion-controlled kinetic regime. Carbon 2023 , 201 , 745-755. Moyer-Vanderburgh, K.; Ma, M. C.; Park, S. J.; Jue, M. L.; Buchsbaum, S. F.; Wu, K. J.; Wood, M.; Ye, J.; Fornasiero, F. Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes. ACS Appl Mater Interfaces 2022 , 14 , 54981-54991.

Synthesis of Wafer-Scale SWCNT Forests with Remarkably Invariant Structural Properties in a Bulk-Diffusion-Controlled Kinetic Regime

Selective growth of semiconducting single-walled carbon nanotubes solely from carbon monoxide

Integrating Vertically Aligned Carbon Nanotubes on Micromechanical Structures

Frontogenesis-inspired efficient synthesis of dense SWCNT fiber through in-situ boosting of catalyst re-nucleation

High-Density Carbon Nanotube Forest Growth on Copper Foil for Enhanced Thermal and Electrochemical Interfaces

Growth of High Quality, High Density Single-Walled Carbon Nanotube Forests on Copper Foils

Wide range control of microstructure and mechanical properties of carbon nanotube forests: A comparison between fixed and floating catalyst CVD techniques

Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers

Synthesis of Ultralong Carbon Nanotubes with Ultrahigh Yields.

Carbon-assisted Catalyst Pretreatment Enables Straightforward Synthesis of High-Density Carbon Nanotube Forests

Growth of High-Density Carbon Nanotube Forests on Conductive TiSiN Supports

Carbon Nanotube Fibers with Excellent Mechanical and Electrical Properties by Structural Realigning and Densification

Carbon nanotubes and related nanomaterials: critical advances and challenges for synthesis toward mainstream commercial applications

The Fabrication of Vertically Aligned and Periodically Distributed Carbon Nanotube Bundles and Periodically Porous Carbon Nanotube Films Through a Combination of Laser Interference Ablation and Metal-Catalyzed Chemical Vapor Deposition.

Spatially Confined CVD Growth of High‐Density Semiconducting Single‐Walled Carbon Nanotube Horizontal Arrays

Interfacial-bubbling-induced Nondestructive Expansion to Reconstruct Superstrong and Multifunctional Carbon Nanotube Fibers

The Application of Gas Dwell Time Control for Rapid Single Wall Carbon Nanotube Forest Synthesis to Acetylene Feedstock

Growth of Tall Vertical Carbon Nanotube Forests using Al-Fe Catalysts and Transfer to Flexible Substrates

Nearly Exclusive Growth of Small Diameter Semiconducting Single-Wall Carbon Nanotubes from Organic Chemistry Synthetic End-Cap Molecules

Rate-selected Growth of Ultrapure Semiconducting Carbon Nanotube Arrays

Towards the synthesis of semiconducting single-walled carbon nanotubes by floating-catalyst chemical vapor deposition: Challenges of reproducibility