Abstract:Robust synthesis of vertically aligned carbon nanotubes (VACNT) at large scale is required to accelerate deployment of numerous cutting-edge devices to emerging commercial applications. 1 Large-area single-walled (SW) CNT forests with high densities and small diameters are especially important for many applications, yet they are conspicuously absent from the literature due to reproducibility and synthesis challenges, which are further exacerbated when flexible metal foils are used as support instead of traditional Si or quartz wafers. To address this need, we demonstrate that the structural characteristics of SWCNTs produced in a growth regime dominated by bulk diffusion of the gaseous carbon precursor are remarkably invariant over a broad range of process conditions (precursor concentration increased up to 30-fold, catalyst substrate area from 1 cm 2 to 180 cm 2 , growth pressure from 20 to 790 mbar, and gas flowrates up to 8-fold). 2 Forests structural properties are also preserved when growth is transitioned from Si wafers to Inconel metal foils. 3 We show that a simple growth kinetics model that accounts for both reactant bulk diffusion and competing byproduct formation in the presence of excess hydrogen quantitatively reproduces the experimental data in the entire isothermal parameter space. The model enables critical predictions for process scale-up optimization including a potential 6-fold increase in CNT production rate, a ~ 90% carbon conversion efficiency in select conditions, and elimination of reaction rate decay observed at high pressures by using a hydrogen-free growth environment. This model-guided opportunity to substantially improve synthesis throughput and efficiency, in conjunction with the remarkably invariant CNT properties on both metal and insulating substrates, is appealing for reliable VACNT device fabrication at both small and industrial scales. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. References Rao, R.; Pint, C. L.; Islam, A. E.; Weatherup, R. S.; Hofmann, S.; Meshot, E. R.; Wu, F.; Zhou, C.; Dee, N.; Amama, P. B.; Carpena-Nuñez, J.; Shi, W.; Plata, D. L.; Penev, E. S.; Yakobson, B. I.; Balbuena, P. B.; Bichara, C.; Futaba, D. N.; Noda, S.; Shin, H.; Kim, K. S.; Simard, B.; Mirri, F.; Pasquali, M.; Fornasiero, F.; Kauppinen, E. I.; Arnold, M.; Cola, B. A.; Nikolaev, P.; Arepalli, S.; Cheng, H.-M.; Zakharov, D. N.; Stach, E. A.; Zhang, J.; Wei, F.; Terrones, M.; Geohegan, D. B.; Maruyama, B.; Maruyama, S.; Li, Y.; Adams, W. W.; Hart, A. J. Carbon Nanotubes and Related Nanomaterials: Critical Advances and Challenges for Synthesis toward Mainstream Commercial Applications. ACS Nano 2018 , 12 , 11756-11784. Park, S. J.; Moyer-Vanderburgh, K.; Buchsbaum, S. F.; Meshot, E. R.; Jue, M. L.; Wu, K. J.; Fornasiero, F. Synthesis of wafer-scale SWCNT forests with remarkably invariant structural properties in a bulk-diffusion-controlled kinetic regime. Carbon 2023 , 201 , 745-755. Moyer-Vanderburgh, K.; Ma, M. C.; Park, S. J.; Jue, M. L.; Buchsbaum, S. F.; Wu, K. J.; Wood, M.; Ye, J.; Fornasiero, F. Growth and Performance of High-Quality SWCNT Forests on Inconel Foils as Lithium-Ion Battery Anodes. ACS Appl Mater Interfaces 2022 , 14 , 54981-54991.

Frontogenesis-inspired efficient synthesis of dense SWCNT fiber through in-situ boosting of catalyst re-nucleation

Efficient Fabrication of High-Quality Single-Walled Carbon Nanotubes and Their Macroscopic Conductive Fibers

Continuous and Scalable Fabrication and Multifunctional Properties of Carbon Nanotube Aerogels from the Floating Catalyst Method

Synthesis of Wafer-Scale SWCNT Forests with Remarkably Invariant Structural Properties in a Bulk-Diffusion-Controlled Kinetic Regime

Growth Of High-Quality Single-Wall Carbon Nanotubes Without Amorphous Carbon Formation

Scalable growth of single-walled carbon nanotubes with a highly uniform structure

Carbon Nanotube Fibers with Excellent Mechanical and Electrical Properties by Structural Realigning and Densification

Carbon fiber-promoted activation of catalyst for efficient growth of single-walled carbon nanotubes

Catalyst Regeneration and Multicycle Growth of High Purity and Yield Semiconducting Single-Walled Carbon Nanotubes

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

An Emerging Strategy in Sequential Synthesis of Catalyst and Carbon Nanotube Foams by Employing a Chemical Vapor Deposition Procedure: Structural Evaluation and Growth Mechanism

Carbon nanotube synthesis and spinning as macroscopic fibers assisted by the ceramic reactor tube

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Production of High Quality Single-Walled Carbon Nanotubes in a Nano-Agglomerated Fluidized Bed Reactor

Kinetic Modulation of Carbon Nanotube Growth in Direct Spinning for High-Strength Carbon Nanotube Fibers.

Carbon-assisted Catalyst Pretreatment Enables Straightforward Synthesis of High-Density Carbon Nanotube Forests

Simultaneous improvements in conversion and properties of molecularly controlled CNT fibres

Wet-spinning of carbon nanotube fibers: dispersion, processing and properties

Controlling the Crystalline Quality and Yield of Single‐Walled Carbon Nanotubes via Floating Catalyst Chemical Vapor Deposition Synthesis

Catalyst Design Using Nanoporous Iron for the Chemical Vapor Deposition Synthesis of Single-Walled Carbon Nanotubes

In-situ growth of scaly carbon nanotube by Cu@Ni core-shell catalyst on continuous carbon fiber surface for multiply tenoned composite interphase